Seekins Precision114463645
Seekins Precision MXM Cantilever Scope Mount 30mm Matte, 0 MOA$266.00
Availability: In Stock
Current Stock: Out of stock
The Seekins Precision MXM Cantilever Scope Mount is a 30mm rifle scope mount built for shooters who demand precision and durability in their optics platform. MXM stands for Monolithic Extended Mount—Seekins' philosophy that your scope mounting system should be as rigid and reliable as the rifle itself. This 20 MOA cantilever mount is machined from solid 7075-T6 billet aluminum and finished in Type III Hardcoat Anodized matte, giving you a tough, non-glare surface that handles field use without flinching.
What sets the MXM apart is its engineering: a center lug is machined directly into the mount's base, creating an integral recoil interface that seats flush into Picatinny rails with minimal play. That flat, monolithic design is inherently stronger than cross-bolt lug systems and eliminates the guesswork of alignment. Seekins rings are 0.8" wide, providing significantly more clamping surface than most competitors—more contact area means better load distribution and less risk of scope tube deformation. Grade 8 T-25 Torx fasteners hold everything in place with strength that won't strip out if you torque them to spec.
The MXM arrives ready to use: no lapping, no shims, no tricks. Install it on your 1913 Picatinny rail, mount your 30mm scope, torque the fasteners, and shoot. Whether you're setting up a precision rifle for long-range hunting, a competition gun, or a dedicated range rig, this mount gives you the foundation to keep your optics exactly where you put them, shot after shot.
| Tube Diameter | 30mm |
| Cant | 20 MOA |
| Material | 7075-T6 Billet Aluminum |
| Rail Interface | 1913 Picatinny |
| Finish | Type III Hardcoat Anodized Matte Black |
| Ring Width | 0.8" |
| Fastener Grade | Grade 8 T-25 Torx |
| Recoil Lug | Integral Center Lug (Monolithic) |
The 20 MOA cant is a permanent 20-minute-of-angle upward tilt built into the mount's base. This angle lets you use more of your scope's elevation travel for long-range shots without running out of dial. It mounts to any standard 1913 Picatinny rail (common on modern rifles and AR-pattern platforms). If your rifle has a Picatinny rail on the receiver, this mount will fit.
No. Seekins rings are machined to specification and require no lapping or shimming. The integral center lug seats directly into Picatinny slots with precise fit, and the 0.8" wide ring design distributes clamping force evenly. Install, torque to spec, and shoot.
The MXM is designed for 30mm scope tubes, which cover the vast majority of modern hunting and tactical optics. Verify your scope's tube diameter before ordering.
This mount uses Grade 8 T-25 Torx fasteners that are engineered to handle proper torque without stripping. Consult Seekins' torque specifications or your rifle manufacturer's recommendations for your specific application. The Grade 8 fasteners are robust enough to handle correct torque without failure.
SKU: 114464986 • Width: 6.1in • Height: 3.4in • Depth: 9.4in • Weight: 0.88oz
Availability: In Stock
Current Stock: Out of stock
The Seekins Precision MXM Cantilever Scope Mount is a 30mm rifle scope mount built for shooters who demand precision and durability in their optics platform. MXM stands for Monolithic Extended Mount—Seekins' philosophy that your scope mounting system should be as rigid and reliable as the rifle itself. This 20 MOA cantilever mount is machined from solid 7075-T6 billet aluminum and finished in Type III Hardcoat Anodized matte, giving you a tough, non-glare surface that handles field use without flinching.
What sets the MXM apart is its engineering: a center lug is machined directly into the mount's base, creating an integral recoil interface that seats flush into Picatinny rails with minimal play. That flat, monolithic design is inherently stronger than cross-bolt lug systems and eliminates the guesswork of alignment. Seekins rings are 0.8" wide, providing significantly more clamping surface than most competitors—more contact area means better load distribution and less risk of scope tube deformation. Grade 8 T-25 Torx fasteners hold everything in place with strength that won't strip out if you torque them to spec.
The MXM arrives ready to use: no lapping, no shims, no tricks. Install it on your 1913 Picatinny rail, mount your 30mm scope, torque the fasteners, and shoot. Whether you're setting up a precision rifle for long-range hunting, a competition gun, or a dedicated range rig, this mount gives you the foundation to keep your optics exactly where you put them, shot after shot.
| Tube Diameter | 30mm |
| Cant | 20 MOA |
| Material | 7075-T6 Billet Aluminum |
| Rail Interface | 1913 Picatinny |
| Finish | Type III Hardcoat Anodized Matte Black |
| Ring Width | 0.8" |
| Fastener Grade | Grade 8 T-25 Torx |
| Recoil Lug | Integral Center Lug (Monolithic) |
The 20 MOA cant is a permanent 20-minute-of-angle upward tilt built into the mount's base. This angle lets you use more of your scope's elevation travel for long-range shots without running out of dial. It mounts to any standard 1913 Picatinny rail (common on modern rifles and AR-pattern platforms). If your rifle has a Picatinny rail on the receiver, this mount will fit.
No. Seekins rings are machined to specification and require no lapping or shimming. The integral center lug seats directly into Picatinny slots with precise fit, and the 0.8" wide ring design distributes clamping force evenly. Install, torque to spec, and shoot.
The MXM is designed for 30mm scope tubes, which cover the vast majority of modern hunting and tactical optics. Verify your scope's tube diameter before ordering.
This mount uses Grade 8 T-25 Torx fasteners that are engineered to handle proper torque without stripping. Consult Seekins' torque specifications or your rifle manufacturer's recommendations for your specific application. The Grade 8 fasteners are robust enough to handle correct torque without failure.
SKU: 114464986 • Width: 6.1in • Height: 3.4in • Depth: 9.4in • Weight: 0.88oz