Sellier & Bellot121688402
SB Tactical SB PDW Adjustable Pistol Brace - Black$239.99
Loading...
Loading...
Loading...
Availability: In Stock
The SB Tactical HK PDW 3-position pistol brace is a stabilizing brace engineered for shooters who want improved control and a third point of contact on their MP5 or HK53 pistol platform. Built with a 6061 hard-coat anodized aluminum housing and steel rods, this brace features a pull-through adjustment mechanism that lets you quickly extend to your preferred length without fumbling with levers or tools — a meaningful advantage when you need to transition fast or adjust on the fly.
The three adjustable positions (3.2 inches collapsed, 5.3 inches mid, 8.0 inches extended) give you flexibility for different shooting styles and preferences. The brace comes complete and ready to install, with an integral QD sling attachment point molded into the aluminum adapter, and includes an adjustable nylon strap. At just over 29 ounces, it's built to take hard use without excess bulk. Proudly manufactured in the USA and designed by a veteran, the HK PDW is engineered with ATF compliance in mind for legal confidence.
Compatibility requires attention: this brace fits HK SP5, Century Arms AP5, Zenith ZF-5, and most MP5 clones in 9mm with the correct receiver pin configuration. It does not fit two-pin MP5K models (SP5K, PTR 9KT, AP5-P, and others in that family). Some PTR models may have receiver irregularities that prevent proper fit. Before ordering, compare your pistol's pin count and receiver profile to the images shown — getting this wrong wastes time and creates frustration.
If you run an MP5 pistol and want genuine stability without permanently converting it, the HK PDW gives you that middle ground: better control, faster target transitions, and the ability to keep your platform in pistol configuration when the occasion calls for it.
| Brand | SB Tactical |
| Product Type | Pistol Stabilizing Brace |
| Housing Material | 6061 hard-coat anodized aluminum with steel rods |
| Length (Collapsed) | 3.2 inches |
| Length (Mid Position) | 5.3 inches |
| Length (Extended) | 8.0 inches |
| Maximum Width | 2.0 inches |
| Strap Width | 1.0 inch |
| Weight | 29.25 ounces |
| Color | Black |
| Adjustment Positions | 3 |
| Included Accessories | Adjustable nylon strap |
The HK PDW is designed for most MP5 and HK53 pistols in 9mm, including HK SP5, Century Arms AP5, Zenith ZF-5, and common MP5 clones. However, it will not fit two-pin MP5K models such as the SP5K, PTR 9KT, or AP5-P. Before purchasing, verify that your pistol has the correct receiver pin configuration by comparing it to the product images. Some PTR models may have receiver irregularities that prevent proper fitting.
The SB Tactical HK PDW comes as a complete assembly ready to install. It includes the aluminum and steel brace housing with integral QD sling attachment and an adjustable nylon strap. No additional parts are required for installation.
The HK PDW uses a pull-through design, allowing you to extend or adjust the brace between its three positions (3.2 inches collapsed, 5.3 inches mid, and 8.0 inches extended) without depressing a lever or removing the brace from your pistol. This makes quick adjustments straightforward in the field.
Yes. The brace features an integral QD (quick-detach) sling attachment point built into the aluminum housing, allowing you to quickly mount or remove a sling as needed.
SKU: 121685587 • Weight: 2.3oz
Availability: In Stock
The SB Tactical HK PDW 3-position pistol brace is a stabilizing brace engineered for shooters who want improved control and a third point of contact on their MP5 or HK53 pistol platform. Built with a 6061 hard-coat anodized aluminum housing and steel rods, this brace features a pull-through adjustment mechanism that lets you quickly extend to your preferred length without fumbling with levers or tools — a meaningful advantage when you need to transition fast or adjust on the fly.
The three adjustable positions (3.2 inches collapsed, 5.3 inches mid, 8.0 inches extended) give you flexibility for different shooting styles and preferences. The brace comes complete and ready to install, with an integral QD sling attachment point molded into the aluminum adapter, and includes an adjustable nylon strap. At just over 29 ounces, it's built to take hard use without excess bulk. Proudly manufactured in the USA and designed by a veteran, the HK PDW is engineered with ATF compliance in mind for legal confidence.
Compatibility requires attention: this brace fits HK SP5, Century Arms AP5, Zenith ZF-5, and most MP5 clones in 9mm with the correct receiver pin configuration. It does not fit two-pin MP5K models (SP5K, PTR 9KT, AP5-P, and others in that family). Some PTR models may have receiver irregularities that prevent proper fit. Before ordering, compare your pistol's pin count and receiver profile to the images shown — getting this wrong wastes time and creates frustration.
If you run an MP5 pistol and want genuine stability without permanently converting it, the HK PDW gives you that middle ground: better control, faster target transitions, and the ability to keep your platform in pistol configuration when the occasion calls for it.
| Brand | SB Tactical |
| Product Type | Pistol Stabilizing Brace |
| Housing Material | 6061 hard-coat anodized aluminum with steel rods |
| Length (Collapsed) | 3.2 inches |
| Length (Mid Position) | 5.3 inches |
| Length (Extended) | 8.0 inches |
| Maximum Width | 2.0 inches |
| Strap Width | 1.0 inch |
| Weight | 29.25 ounces |
| Color | Black |
| Adjustment Positions | 3 |
| Included Accessories | Adjustable nylon strap |
The HK PDW is designed for most MP5 and HK53 pistols in 9mm, including HK SP5, Century Arms AP5, Zenith ZF-5, and common MP5 clones. However, it will not fit two-pin MP5K models such as the SP5K, PTR 9KT, or AP5-P. Before purchasing, verify that your pistol has the correct receiver pin configuration by comparing it to the product images. Some PTR models may have receiver irregularities that prevent proper fitting.
The SB Tactical HK PDW comes as a complete assembly ready to install. It includes the aluminum and steel brace housing with integral QD sling attachment and an adjustable nylon strap. No additional parts are required for installation.
The HK PDW uses a pull-through design, allowing you to extend or adjust the brace between its three positions (3.2 inches collapsed, 5.3 inches mid, and 8.0 inches extended) without depressing a lever or removing the brace from your pistol. This makes quick adjustments straightforward in the field.
Yes. The brace features an integral QD (quick-detach) sling attachment point built into the aluminum housing, allowing you to quickly mount or remove a sling as needed.
SKU: 121685587 • Weight: 2.3oz