Samson Manufacturing167529425
Sxt Handguard 11'' M-Lok Black$188.56
Availability: In Stock
The Samson Manufacturing SXT Handguard 9'' M-LOK Black is a free-floating AR-15 handguard built for shooters who want a lightweight, modular platform without unnecessary bulk. At 9.25 inches actual length, it strikes a practical balance for mid-length builds—short enough for CQB-style setups, long enough to clear most optics and accessories. The 7-sided M-LOK attachment system gives you plenty of real estate to mount lights, lasers, grips, and other gear exactly where you need them, and it comes packaged with a 2-inch M-LOK rail to get you started.
This handguard is made in New Hampshire from 6061-T6 aluminum and finished with MIL-A-8625 type III hard anodizing—the same military-spec coating used on quality AR uppers and lowers. The free-float design means the tube doesn't touch your barrel, which can tighten groups and improve consistency. Installation is straightforward: a simple two-bolt clamping system threads into your existing barrel nut, no knurling or bias blocks required. The package includes the hex wrench, a new barrel nut, and the wrench you need to install it.
Aesthetics matter too. The chamfered leading edge gives the SXT a cleaner profile than squared-off designs, and the ambidextrous integrated QD sling point is tucked into the geometry so it won't snag gear or catch on your kit. Whether you're building a hunting rifle, running it at the range, or setting up a defensive platform, this handguard delivers American-made durability and thoughtful ergonomic touches without breaking the bank.
| Length (Actual) | 9.25 inches |
| M-LOK Attachment | Yes, 7-sided |
| Weight (with Barrel Nut) | 11.3 oz |
| Internal Diameter | 1.25 inches |
| Outer Diameter | 1.6 inches |
| Material | 6061-T6 Aluminum |
| Finish | MIL-A-8625 Type III Hard Anodize |
| Made In | New Hampshire, USA |
| Includes | Barrel nut, hex wrench, barrel nut wrench, 2'' M-LOK attachment |
The SXT Handguard works on any AR-15 with a standard barrel nut. The clamping system threads directly into your existing barrel nut, so it's compatible with most mil-spec and commercial builds. If you have questions about a specific receiver or upper assembly, reach out to us and we can confirm fit.
Yes. The free-float design means the tube doesn't contact your barrel, which can improve accuracy and shot-to-shot consistency by eliminating barrel harmonics interference.
It features a 7-sided M-LOK attachment pattern, which is a modern, slim alternative to Picatinny rail. M-LOK is widely supported by manufacturers of tactical lights, laser modules, vertical grips, sling attachments, and other accessories. The handguard comes with one 2-inch M-LOK rail to get you started.
The 9-inch model weighs 11.3 ounces (with barrel nut included) and has an actual length of 9.25 inches. The internal diameter is 1.25 inches and the outer diameter is 1.6 inches.
SKU: 121685452 • Width: 4.5in • Height: 4.25in • Depth: 18.75in • Weight: 1.41oz
Availability: In Stock
The Samson Manufacturing SXT Handguard 9'' M-LOK Black is a free-floating AR-15 handguard built for shooters who want a lightweight, modular platform without unnecessary bulk. At 9.25 inches actual length, it strikes a practical balance for mid-length builds—short enough for CQB-style setups, long enough to clear most optics and accessories. The 7-sided M-LOK attachment system gives you plenty of real estate to mount lights, lasers, grips, and other gear exactly where you need them, and it comes packaged with a 2-inch M-LOK rail to get you started.
This handguard is made in New Hampshire from 6061-T6 aluminum and finished with MIL-A-8625 type III hard anodizing—the same military-spec coating used on quality AR uppers and lowers. The free-float design means the tube doesn't touch your barrel, which can tighten groups and improve consistency. Installation is straightforward: a simple two-bolt clamping system threads into your existing barrel nut, no knurling or bias blocks required. The package includes the hex wrench, a new barrel nut, and the wrench you need to install it.
Aesthetics matter too. The chamfered leading edge gives the SXT a cleaner profile than squared-off designs, and the ambidextrous integrated QD sling point is tucked into the geometry so it won't snag gear or catch on your kit. Whether you're building a hunting rifle, running it at the range, or setting up a defensive platform, this handguard delivers American-made durability and thoughtful ergonomic touches without breaking the bank.
| Length (Actual) | 9.25 inches |
| M-LOK Attachment | Yes, 7-sided |
| Weight (with Barrel Nut) | 11.3 oz |
| Internal Diameter | 1.25 inches |
| Outer Diameter | 1.6 inches |
| Material | 6061-T6 Aluminum |
| Finish | MIL-A-8625 Type III Hard Anodize |
| Made In | New Hampshire, USA |
| Includes | Barrel nut, hex wrench, barrel nut wrench, 2'' M-LOK attachment |
The SXT Handguard works on any AR-15 with a standard barrel nut. The clamping system threads directly into your existing barrel nut, so it's compatible with most mil-spec and commercial builds. If you have questions about a specific receiver or upper assembly, reach out to us and we can confirm fit.
Yes. The free-float design means the tube doesn't contact your barrel, which can improve accuracy and shot-to-shot consistency by eliminating barrel harmonics interference.
It features a 7-sided M-LOK attachment pattern, which is a modern, slim alternative to Picatinny rail. M-LOK is widely supported by manufacturers of tactical lights, laser modules, vertical grips, sling attachments, and other accessories. The handguard comes with one 2-inch M-LOK rail to get you started.
The 9-inch model weighs 11.3 ounces (with barrel nut included) and has an actual length of 9.25 inches. The internal diameter is 1.25 inches and the outer diameter is 1.6 inches.
SKU: 121685452 • Width: 4.5in • Height: 4.25in • Depth: 18.75in • Weight: 1.41oz