Cgs Suppressors115726303
CGS Suppressors Piston 1/2"-36 TPI Black Nitride 17-4 Stainless Steel for KRK12X36PISTBK$50.00
Availability: In Stock
The Rugged Suppressor OP006 is a replacement piston designed for suppressor booster systems on handguns and pistol-caliber platforms. Built from 17-4 stainless steel and heat-treated for durability, this piston features a non-slotted design that creates a complete gas seal around its full circumference. That geometry is the key to reducing gas blowback—one of the primary comfort and reliability concerns when running a suppressed handgun.
If you're running a Rugged suppressor with a booster tube on a pistol or PCC, a quality piston is essential to the system's function and your shooting experience. The full-perimeter seal means less gas coming back toward your face and receiver, which translates to softer shooting impulse, easier follow-up shots, and better reliability cycle-to-cycle. The 1/2"-36 TPI threads mate with standard suppressors and boosters built to that specification.
Rugged machines these pistons from 17-4 stainless steel—a material chosen for its strength and corrosion resistance under the repeated stress and temperature swings of suppressed fire. The heat treatment hardens the metal to withstand thousands of rounds. If you're replacing a worn piston, upgrading a booster system, or building out a new suppressed handgun setup, this is a direct replacement part engineered to last.
| Thread Pitch | 1/2"-36 TPI |
| Material | 17-4 Stainless Steel |
| Finish | Copper (heat-treated) |
| Design | Non-slotted, full-circumference seal |
| Application | Suppressor booster systems on handguns |
A piston is a key component of a suppressor booster system, typically used on handguns and pistol-caliber carbines. It cycles with the slide or bolt, manages gas flow, and maintains a seal within the booster tube to reduce blowback and improve cycling reliability.
The OP006 is threaded 1/2"-36 TPI. It will fit suppressors and boosters designed to accept 1/2"-36 TPI pistons. Verify your suppressor and booster tube's thread specification before purchasing.
Gas blowback—unburned or partially burned powder gas returning toward the shooter's face and firearm—can make suppressed shooting uncomfortable, reduce cycling reliability, and increase fouling. The OP006's full-circumference seal minimizes blowback for a more pleasant shooting experience and better reliability.
Yes. The OP006 is machined from 17-4 stainless steel and heat-treated to withstand the stress and thermal cycling of suppressed fire. It is designed to last through thousands of rounds when maintained as part of your suppressor system.
SKU: 115856590 • Width: 1.5in • Height: 0.9in • Depth: 1.7in • Weight: 0.13oz
Availability: In Stock
The Rugged Suppressor OP006 is a replacement piston designed for suppressor booster systems on handguns and pistol-caliber platforms. Built from 17-4 stainless steel and heat-treated for durability, this piston features a non-slotted design that creates a complete gas seal around its full circumference. That geometry is the key to reducing gas blowback—one of the primary comfort and reliability concerns when running a suppressed handgun.
If you're running a Rugged suppressor with a booster tube on a pistol or PCC, a quality piston is essential to the system's function and your shooting experience. The full-perimeter seal means less gas coming back toward your face and receiver, which translates to softer shooting impulse, easier follow-up shots, and better reliability cycle-to-cycle. The 1/2"-36 TPI threads mate with standard suppressors and boosters built to that specification.
Rugged machines these pistons from 17-4 stainless steel—a material chosen for its strength and corrosion resistance under the repeated stress and temperature swings of suppressed fire. The heat treatment hardens the metal to withstand thousands of rounds. If you're replacing a worn piston, upgrading a booster system, or building out a new suppressed handgun setup, this is a direct replacement part engineered to last.
| Thread Pitch | 1/2"-36 TPI |
| Material | 17-4 Stainless Steel |
| Finish | Copper (heat-treated) |
| Design | Non-slotted, full-circumference seal |
| Application | Suppressor booster systems on handguns |
A piston is a key component of a suppressor booster system, typically used on handguns and pistol-caliber carbines. It cycles with the slide or bolt, manages gas flow, and maintains a seal within the booster tube to reduce blowback and improve cycling reliability.
The OP006 is threaded 1/2"-36 TPI. It will fit suppressors and boosters designed to accept 1/2"-36 TPI pistons. Verify your suppressor and booster tube's thread specification before purchasing.
Gas blowback—unburned or partially burned powder gas returning toward the shooter's face and firearm—can make suppressed shooting uncomfortable, reduce cycling reliability, and increase fouling. The OP006's full-circumference seal minimizes blowback for a more pleasant shooting experience and better reliability.
Yes. The OP006 is machined from 17-4 stainless steel and heat-treated to withstand the stress and thermal cycling of suppressed fire. It is designed to last through thousands of rounds when maintained as part of your suppressor system.
SKU: 115856590 • Width: 1.5in • Height: 0.9in • Depth: 1.7in • Weight: 0.13oz