$29.04
Loading...
Loading...
Loading...
Availability: In Stock
The Ruger 90320 extra high 30mm scope ring gives you the elevation needed to mount full-diameter objectives and large-turret scopes that would otherwise interfere with your rifle's action or receiver. Built as a genuine Ruger factory accessory, this ring is engineered to the same tolerances as Ruger's firearms and pairs seamlessly with Ruger bolt-action platforms. The extra-high configuration is essential when you're running a premium optic with an objective lens up to 62mm in diameter—think modern hunting scopes or long-range competition glass that demand clearance.
The matte stainless steel Hawkeye finish resists corrosion and blends with modern rifle aesthetics while delivering the durability hunters and shooters expect from factory-backed components. Unlike aftermarket rings of uncertain pedigree, Ruger's own accessories are designed to hold zero and maintain consistency across your setup. If you're building out a rifle with a mid-to-high-magnification scope or installing a wide objective on a standard action, the 30mm extra-high ring solves the geometry problem without compromise.
These rings are a critical link in your scope mounting system—they're not the place to pinch pennies or accept guesswork. The Ruger 90320 delivers the clearance and precision you need so you can focus on the shot.
| Brand | Ruger |
| Model | 90320 |
| Ring Type | Extra High |
| Tube Diameter | 30mm |
| Maximum Objective Diameter | 62mm |
| Finish | Matte Stainless Steel Hawkeye |
The Ruger 90320 is a genuine Ruger factory accessory designed for Ruger bolt-action rifles with 30mm mounting systems. Confirm your rifle's action type and mounting configuration before ordering.
Extra-high rings provide additional clearance between the scope tube and your rifle's receiver or action. This is necessary when using larger-objective scopes (up to 62mm in this case) or scopes with tall turrets that would otherwise make contact with the rifle.
These rings are designed for 30mm-diameter scope tubes. Confirm your scope's tube diameter before purchase. The extra-high profile is best suited for objectives up to 62mm and scopes with taller than average turret assemblies.
Ruger's own accessories are engineered to the same standards as their firearms and carry the backing of the manufacturer. As a critical component in your scope mounting system, factory rings ensure consistent tolerances and reliability.
SKU: 114461221 • Width: 2.8in • Height: 0.9in • Depth: 5in • Weight: 0.25oz
Availability: In Stock
The Ruger 90320 extra high 30mm scope ring gives you the elevation needed to mount full-diameter objectives and large-turret scopes that would otherwise interfere with your rifle's action or receiver. Built as a genuine Ruger factory accessory, this ring is engineered to the same tolerances as Ruger's firearms and pairs seamlessly with Ruger bolt-action platforms. The extra-high configuration is essential when you're running a premium optic with an objective lens up to 62mm in diameter—think modern hunting scopes or long-range competition glass that demand clearance.
The matte stainless steel Hawkeye finish resists corrosion and blends with modern rifle aesthetics while delivering the durability hunters and shooters expect from factory-backed components. Unlike aftermarket rings of uncertain pedigree, Ruger's own accessories are designed to hold zero and maintain consistency across your setup. If you're building out a rifle with a mid-to-high-magnification scope or installing a wide objective on a standard action, the 30mm extra-high ring solves the geometry problem without compromise.
These rings are a critical link in your scope mounting system—they're not the place to pinch pennies or accept guesswork. The Ruger 90320 delivers the clearance and precision you need so you can focus on the shot.
| Brand | Ruger |
| Model | 90320 |
| Ring Type | Extra High |
| Tube Diameter | 30mm |
| Maximum Objective Diameter | 62mm |
| Finish | Matte Stainless Steel Hawkeye |
The Ruger 90320 is a genuine Ruger factory accessory designed for Ruger bolt-action rifles with 30mm mounting systems. Confirm your rifle's action type and mounting configuration before ordering.
Extra-high rings provide additional clearance between the scope tube and your rifle's receiver or action. This is necessary when using larger-objective scopes (up to 62mm in this case) or scopes with tall turrets that would otherwise make contact with the rifle.
These rings are designed for 30mm-diameter scope tubes. Confirm your scope's tube diameter before purchase. The extra-high profile is best suited for objectives up to 62mm and scopes with taller than average turret assemblies.
Ruger's own accessories are engineered to the same standards as their firearms and carry the backing of the manufacturer. As a critical component in your scope mounting system, factory rings ensure consistent tolerances and reliability.
SKU: 114461221 • Width: 2.8in • Height: 0.9in • Depth: 5in • Weight: 0.25oz