Ruger114462958
Ruger 30mm High Target Gray Scope Rings$29.04
Loading...
Loading...
Loading...
Availability: In Stock
The Ruger 90317 6K Extra High scope ring is a genuine Ruger factory accessory built for shooters running 30mm scope tubes that need serious clearance above the barrel and action. If you're mounting a riflescope with a larger objective lens—up to 62mm—and your setup demands extra vertical distance to avoid contact with your rifle's receiver or barrel, these rings deliver the height and rigidity you need. Finished in target gray stainless steel, they're corrosion-resistant and built to hold zero through hard use in the field or at the bench.
Extra-high rings solve a real problem: some optic and rifle combinations leave no room for error, especially on AR platforms, precision rifles, or guns with raised receivers. The 6K designation indicates Ruger's engineering standard for this height class. Sold individually, so verify you need a pair before checkout if you're building a rifle from scratch.
Ruger rings are known for solid construction and reliable clamping—they hold your scope where you put it. The stainless steel construction resists rust and requires minimal maintenance, making them a practical choice whether you're hunting in wet country or running a competition rifle that sees regular abuse.
| Brand | Ruger |
| Model | 90317 6K |
| Ring Height | Extra High |
| Tube Diameter | 30mm |
| Maximum Objective Diameter | 62mm |
| Material | Stainless Steel |
| Finish | Target Gray |
| Type | Scope Ring (Individual) |
The Ruger 90317 6K rings are designed for 30mm scope tubes with objective lenses up to 62mm in diameter. Measure your scope's tube diameter and objective size to confirm compatibility. If you're unsure, check your scope's manual or contact us.
Extra-high rings provide clearance between your scope and the rifle's receiver or barrel. They're essential on AR platforms, rifles with raised receivers, precision competition builds, or setups where a standard ring height would contact the gun. They also work well for co-witnessing with backup iron sights on certain platforms.
Yes. This product is sold individually. A complete scope mounting setup requires two rings—one at the front of the scope and one at the rear. Order a second ring if you don't already have one.
The target gray stainless steel construction resists rust and corrosion, making these rings suitable for hunting in wet conditions and outdoor shooting. Stainless steel requires less maintenance than blued or parkerized finishes.
SKU: 114461324 • Width: 2.8in • Height: 0.8in • Depth: 5in • Weight: 0.2oz
Availability: In Stock
The Ruger 90317 6K Extra High scope ring is a genuine Ruger factory accessory built for shooters running 30mm scope tubes that need serious clearance above the barrel and action. If you're mounting a riflescope with a larger objective lens—up to 62mm—and your setup demands extra vertical distance to avoid contact with your rifle's receiver or barrel, these rings deliver the height and rigidity you need. Finished in target gray stainless steel, they're corrosion-resistant and built to hold zero through hard use in the field or at the bench.
Extra-high rings solve a real problem: some optic and rifle combinations leave no room for error, especially on AR platforms, precision rifles, or guns with raised receivers. The 6K designation indicates Ruger's engineering standard for this height class. Sold individually, so verify you need a pair before checkout if you're building a rifle from scratch.
Ruger rings are known for solid construction and reliable clamping—they hold your scope where you put it. The stainless steel construction resists rust and requires minimal maintenance, making them a practical choice whether you're hunting in wet country or running a competition rifle that sees regular abuse.
| Brand | Ruger |
| Model | 90317 6K |
| Ring Height | Extra High |
| Tube Diameter | 30mm |
| Maximum Objective Diameter | 62mm |
| Material | Stainless Steel |
| Finish | Target Gray |
| Type | Scope Ring (Individual) |
The Ruger 90317 6K rings are designed for 30mm scope tubes with objective lenses up to 62mm in diameter. Measure your scope's tube diameter and objective size to confirm compatibility. If you're unsure, check your scope's manual or contact us.
Extra-high rings provide clearance between your scope and the rifle's receiver or barrel. They're essential on AR platforms, rifles with raised receivers, precision competition builds, or setups where a standard ring height would contact the gun. They also work well for co-witnessing with backup iron sights on certain platforms.
Yes. This product is sold individually. A complete scope mounting setup requires two rings—one at the front of the scope and one at the rear. Order a second ring if you don't already have one.
The target gray stainless steel construction resists rust and corrosion, making these rings suitable for hunting in wet conditions and outdoor shooting. Stainless steel requires less maintenance than blued or parkerized finishes.
SKU: 114461324 • Width: 2.8in • Height: 0.8in • Depth: 5in • Weight: 0.2oz
