RPM Mounts200191427
RPM 34mm High Rail Cap Diving Board - Flat Dark Earth$96.99
Availability: In Stock
The RPM 34mm Low Rail Cap Diving Board in Flat Dark Earth is a rail-mounted accessory platform that lets you stack additional optics or aiming devices on top of your primary magnified scope. If you're running an RPM cantilever or ring system, this cap replaces your standard rail cap and provides the mounting surface you need for a secondary red dot, laser rangefinder, or other rail-mounted accessory—all without requiring new rings or major system changes.
RPM designed this diving board to be compact and lightweight, following their philosophy of doing more with less. It's compatible across the entire RPM product line, including their CLR series rings and both Bravo and Delta cantilevers. Installation is straightforward: the mounting screws that came with your original RPM purchase are the exact hardware you'll need. If you're already committed to RPM's precision engineering, this is a simple way to add capability without overcomplicating your setup.
The Flat Dark Earth finish blends with modern rifle platforms and keeps your rig visually cohesive. Whether you're setting up for long-range hunting, precision rifle competition, or tactical shooting, a secondary aiming device mounted on your primary scope rail gives you redundancy and flexibility—especially valuable if your main optic fails or if you want quick access to a close-range sight without dismounting your primary glass.
Yes. The RPM 34mm Low Rail Cap Diving Board is designed as a drop-in replacement cap for all RPM products, including CLR series rings and Bravo/Delta cantilevers. It uses the same mounting screws that came with your original RPM purchase.
Any rail-mounted accessory designed for Picatinny rails can attach here—including red dot sights, laser rangefinders, and other secondary aiming devices. The 34mm platform provides the mounting surface; specific accessory compatibility depends on the individual product's rail mounting system.
No. The mounting screws included with your original RPM purchase are the exact hardware needed to install this cap.
SKU: 200191423 • Width: 2.5in • Height: 1.75in • Depth: 4.75in • Weight: 0.123oz
Availability: In Stock
The RPM 34mm Low Rail Cap Diving Board in Flat Dark Earth is a rail-mounted accessory platform that lets you stack additional optics or aiming devices on top of your primary magnified scope. If you're running an RPM cantilever or ring system, this cap replaces your standard rail cap and provides the mounting surface you need for a secondary red dot, laser rangefinder, or other rail-mounted accessory—all without requiring new rings or major system changes.
RPM designed this diving board to be compact and lightweight, following their philosophy of doing more with less. It's compatible across the entire RPM product line, including their CLR series rings and both Bravo and Delta cantilevers. Installation is straightforward: the mounting screws that came with your original RPM purchase are the exact hardware you'll need. If you're already committed to RPM's precision engineering, this is a simple way to add capability without overcomplicating your setup.
The Flat Dark Earth finish blends with modern rifle platforms and keeps your rig visually cohesive. Whether you're setting up for long-range hunting, precision rifle competition, or tactical shooting, a secondary aiming device mounted on your primary scope rail gives you redundancy and flexibility—especially valuable if your main optic fails or if you want quick access to a close-range sight without dismounting your primary glass.
Yes. The RPM 34mm Low Rail Cap Diving Board is designed as a drop-in replacement cap for all RPM products, including CLR series rings and Bravo/Delta cantilevers. It uses the same mounting screws that came with your original RPM purchase.
Any rail-mounted accessory designed for Picatinny rails can attach here—including red dot sights, laser rangefinders, and other secondary aiming devices. The 34mm platform provides the mounting surface; specific accessory compatibility depends on the individual product's rail mounting system.
No. The mounting screws included with your original RPM purchase are the exact hardware needed to install this cap.
SKU: 200191423 • Width: 2.5in • Height: 1.75in • Depth: 4.75in • Weight: 0.123oz