Rosco Manufacturing167513127
Rosco Mfg Bl-145-M4-556-7-C Bloodline 5.56 Nato 14.50" Nitride 4150 Cmv Brl$162.00
Availability: In Stock
The Rosco Manufacturing Bloodline 5.56 NATO 14.50" barrel is purpose-built for short-barreled rifle and pistol AR builds where dwell time, suppressor compatibility, and balanced performance matter. Rosco doesn't take a one-size-fits-all approach to barrel engineering—they've engineered twist rate, gas port diameter, and material selection specifically for their Bloodline line, informed by feedback from both civilian shooters and military end users. At 14.50 inches, this barrel sits in the SBR sweet spot, and the 4150 CMV nitride construction delivers durability and corrosion resistance for hard use without the brittleness of some coatings.
The .750" gas block diameter is a standard AR platform spec, making this barrel compatible with common carbine components. The nitride finish protects the bore and exterior surfaces while maintaining reasonable maintenance intervals—a pragmatic choice for shooters who run their rifles, whether suppressed or not. This barrel is designed to function reliably in a dedicated SBR or pistol configuration where proper gas tuning and dwell management separate a shooter-friendly platform from one that beats you up or fails to cycle.
Rosco's engineering philosophy here is straightforward: pick the right specs for the job, not the easiest specs to manufacture. That means the Bloodline is tuned for the 14.50" length and typical SBR operating parameters. If you're building a short, handy AR for home defense, truck gun duty, or suppressed shooting, this barrel brings serious thought to the platform. Remember that short barrels and NFA rules go hand-in-hand—ensure your build complies with all applicable federal and local regulations before assembly.
| Caliber | 5.56 NATO |
| Barrel Length | 14.50" |
| Material | 4150 CMV steel |
| Finish | Nitride |
| Gas Block Diameter | .750" |
| Platform | AR-15 |
All NFA rules apply. A 14.50" barrel falls into SBR territory, which requires proper federal registration and compliance with the National Firearms Act. Check your state and local laws before building. Rosco provides the barrel; ensuring legality is your responsibility.
The Bloodline is engineered for SBR configurations with optimized dwell time, but the specific gas length (carbine, mid, pistol) is not specified in the available data. Contact Rosco or a barrel specialist to confirm the gas system design for your build.
Yes, the Bloodline is designed to run both suppressed and unsuppressed. Rosco engineered the gas port diameter and dwell time with suppressed fire in mind, so it should function reliably with a quality can.
The specific profile type is not detailed in the available specs. For profile details (government, pencil, heavy, etc.), contact Rosco Manufacturing or your dealer directly.
SKU: 167513141 • Width: 3in • Height: 2.5in • Depth: 18.8in • Weight: 1.86oz
Availability: In Stock
The Rosco Manufacturing Bloodline 5.56 NATO 14.50" barrel is purpose-built for short-barreled rifle and pistol AR builds where dwell time, suppressor compatibility, and balanced performance matter. Rosco doesn't take a one-size-fits-all approach to barrel engineering—they've engineered twist rate, gas port diameter, and material selection specifically for their Bloodline line, informed by feedback from both civilian shooters and military end users. At 14.50 inches, this barrel sits in the SBR sweet spot, and the 4150 CMV nitride construction delivers durability and corrosion resistance for hard use without the brittleness of some coatings.
The .750" gas block diameter is a standard AR platform spec, making this barrel compatible with common carbine components. The nitride finish protects the bore and exterior surfaces while maintaining reasonable maintenance intervals—a pragmatic choice for shooters who run their rifles, whether suppressed or not. This barrel is designed to function reliably in a dedicated SBR or pistol configuration where proper gas tuning and dwell management separate a shooter-friendly platform from one that beats you up or fails to cycle.
Rosco's engineering philosophy here is straightforward: pick the right specs for the job, not the easiest specs to manufacture. That means the Bloodline is tuned for the 14.50" length and typical SBR operating parameters. If you're building a short, handy AR for home defense, truck gun duty, or suppressed shooting, this barrel brings serious thought to the platform. Remember that short barrels and NFA rules go hand-in-hand—ensure your build complies with all applicable federal and local regulations before assembly.
| Caliber | 5.56 NATO |
| Barrel Length | 14.50" |
| Material | 4150 CMV steel |
| Finish | Nitride |
| Gas Block Diameter | .750" |
| Platform | AR-15 |
All NFA rules apply. A 14.50" barrel falls into SBR territory, which requires proper federal registration and compliance with the National Firearms Act. Check your state and local laws before building. Rosco provides the barrel; ensuring legality is your responsibility.
The Bloodline is engineered for SBR configurations with optimized dwell time, but the specific gas length (carbine, mid, pistol) is not specified in the available data. Contact Rosco or a barrel specialist to confirm the gas system design for your build.
Yes, the Bloodline is designed to run both suppressed and unsuppressed. Rosco engineered the gas port diameter and dwell time with suppressed fire in mind, so it should function reliably with a quality can.
The specific profile type is not detailed in the available specs. For profile details (government, pencil, heavy, etc.), contact Rosco Manufacturing or your dealer directly.
SKU: 167513141 • Width: 3in • Height: 2.5in • Depth: 18.8in • Weight: 1.86oz