Availability: In Stock
The Rival Arms Precision V1 drop-in barrel for Glock 17 Gen3-4 is a no-gunsmith upgrade that brings match-grade accuracy and durability to your 9mm Luger pistol. Built from 416R stainless steel and finished with a low-temperature vacuum PVD coating, this 4.49-inch barrel is designed to withstand hard use and repeated shooting cycles without sacrificing the precision that matters on the range or in the field. If you're looking to tighten your groups or simply want a barrel that'll hold up under demanding conditions, a quality drop-in upgrade like this one is one of the smartest ways to improve your Glock's performance.
What sets this barrel apart is the attention to the details that separate decent barrels from great ones. The 6-groove rifling is precision-engineered for consistency, while the Boron Nitride DCD inner bore treatment (marketed as BORSLICK) actively resists the carbon and heat buildup that degrades accuracy over extended shooting sessions. The target-crowned muzzle ensures reliable feeding and contributes to the tight, repeatable shooting you'd expect from a match-grade component. Because it's a true drop-in design, you don't need to send your gun to a gunsmith or mess with springs and pins—it's genuinely a straight-swap upgrade.
Rival Arms has built a reputation for precision work at reasonable prices, and this barrel reflects that philosophy. The stainless construction resists corrosion, while the PVD coating adds an extra layer of protection against wear. Whether you're running drills at your local range, training for a competition, or simply maintaining a reliable duty gun, a barrel this well-made deserves to be on your short list.
| Caliber | 9mm Luger |
| Barrel Length | 4.49" |
| Material | 416R Stainless Steel |
| Finish | PVD (Vacuum Physical Deposition) |
| Rifling | 6 Groove |
| Compatibility | Glock 17 Gen3, Glock 17 Gen4 |
| Installation | Drop-in (no gunsmith required) |
Yes. This Rival Arms Precision V1 barrel is engineered as a true drop-in for both Glock 17 Gen3 and Gen4 models—no fitting, modification, or gunsmith work necessary.
The BORSLICK Boron Nitride DCD treatment on the inner bore resists carbon and heat buildup, which means your barrel stays cleaner longer and maintains accuracy even during extended shooting sessions. Less fouling also makes cleaning easier and extends barrel life.
No. This is a drop-in design, meaning it installs without modification to your pistol or any special tools beyond what you'd normally use for basic disassembly.
This barrel is chambered in 9mm Luger, the standard chambering for the Glock 17.
SKU: 115654145 • Width: 3in • Height: 1.5in • Depth: 9.5in • Weight: 0.3oz
Availability: In Stock
The Rival Arms Precision V1 drop-in barrel for Glock 17 Gen3-4 is a no-gunsmith upgrade that brings match-grade accuracy and durability to your 9mm Luger pistol. Built from 416R stainless steel and finished with a low-temperature vacuum PVD coating, this 4.49-inch barrel is designed to withstand hard use and repeated shooting cycles without sacrificing the precision that matters on the range or in the field. If you're looking to tighten your groups or simply want a barrel that'll hold up under demanding conditions, a quality drop-in upgrade like this one is one of the smartest ways to improve your Glock's performance.
What sets this barrel apart is the attention to the details that separate decent barrels from great ones. The 6-groove rifling is precision-engineered for consistency, while the Boron Nitride DCD inner bore treatment (marketed as BORSLICK) actively resists the carbon and heat buildup that degrades accuracy over extended shooting sessions. The target-crowned muzzle ensures reliable feeding and contributes to the tight, repeatable shooting you'd expect from a match-grade component. Because it's a true drop-in design, you don't need to send your gun to a gunsmith or mess with springs and pins—it's genuinely a straight-swap upgrade.
Rival Arms has built a reputation for precision work at reasonable prices, and this barrel reflects that philosophy. The stainless construction resists corrosion, while the PVD coating adds an extra layer of protection against wear. Whether you're running drills at your local range, training for a competition, or simply maintaining a reliable duty gun, a barrel this well-made deserves to be on your short list.
| Caliber | 9mm Luger |
| Barrel Length | 4.49" |
| Material | 416R Stainless Steel |
| Finish | PVD (Vacuum Physical Deposition) |
| Rifling | 6 Groove |
| Compatibility | Glock 17 Gen3, Glock 17 Gen4 |
| Installation | Drop-in (no gunsmith required) |
Yes. This Rival Arms Precision V1 barrel is engineered as a true drop-in for both Glock 17 Gen3 and Gen4 models—no fitting, modification, or gunsmith work necessary.
The BORSLICK Boron Nitride DCD treatment on the inner bore resists carbon and heat buildup, which means your barrel stays cleaner longer and maintains accuracy even during extended shooting sessions. Less fouling also makes cleaning easier and extends barrel life.
No. This is a drop-in design, meaning it installs without modification to your pistol or any special tools beyond what you'd normally use for basic disassembly.
This barrel is chambered in 9mm Luger, the standard chambering for the Glock 17.
SKU: 115654145 • Width: 3in • Height: 1.5in • Depth: 9.5in • Weight: 0.3oz