Reptilia144596967
Reptilia Sdl Mnt 1301/A300 509T$112.46
Availability: In Stock
Running a red dot on your Beretta 1301 or A300 doesn't mean compromising on sight picture or practical speed. The Reptilia Saddle Mount for Beretta 1301/A300 brings compact optic mounting to these popular shotguns with a 1/3 co-witness setup, letting you keep the factory iron sights functional without clutter. Built from billet 7075-T6 aluminum and finished with mil-spec Type III hard coat anodize, this mount offers the durability you'd expect from serious shotgun work—whether that's hunting, sport shooting, or home defense.
The Saddle Mount accepts optics with the Aimpoint ACRO footprint, including Steiner MPS glass, and positions them as low as possible on the receiver. That low mounting profile keeps the optic out of your cheekweld and makes for cleaner gun handling. No special tools or additional hardware required—the mount uses the screws already supplied with your 1301 or A300, so installation is straightforward. Weighing just 23 grams, it adds virtually nothing to the gun's balance.
Made in the USA, this is the kind of no-nonsense accessory that works when you need it to. Whether you're running an Aimpoint ACRO or compatible Steiner MPS optic, the Saddle Mount gets your red dot on target fast and keeps it there.
| Material | Billet 7075-T6 Aluminum |
| Finish | Mil-Spec Type III Hard Coat Anodize |
| Co-Witness Height | 1/3 |
| Optic Compatibility | Aimpoint ACRO footprint (Aimpoint, Steiner MPS) |
| Gun Compatibility | Beretta 1301, Beretta A300 |
| Hardware | Uses existing 1301/A300 screws |
| Weight | 23 grams |
| Manufacture | Made in USA |
The mount accepts optics with the Aimpoint ACRO footprint, including Aimpoint and Steiner MPS compatible glass.
No. The Reptilia Saddle Mount uses the screws that come standard with your 1301 or A300, so no additional hardware is required.
1/3 co-witness positions the optic so that the factory Beretta iron sights remain visible and usable in your sight picture, providing a reliable backup if the red dot goes down.
Yes. The mount is machined from billet 7075-T6 aluminum and coated with mil-spec Type III hard coat anodize, the same finish standard used in military applications for corrosion and wear resistance.
SKU: 114464683 • Width: 5.8in • Height: 2in • Depth: 4.5in • Weight: 0.19oz
Availability: In Stock
Running a red dot on your Beretta 1301 or A300 doesn't mean compromising on sight picture or practical speed. The Reptilia Saddle Mount for Beretta 1301/A300 brings compact optic mounting to these popular shotguns with a 1/3 co-witness setup, letting you keep the factory iron sights functional without clutter. Built from billet 7075-T6 aluminum and finished with mil-spec Type III hard coat anodize, this mount offers the durability you'd expect from serious shotgun work—whether that's hunting, sport shooting, or home defense.
The Saddle Mount accepts optics with the Aimpoint ACRO footprint, including Steiner MPS glass, and positions them as low as possible on the receiver. That low mounting profile keeps the optic out of your cheekweld and makes for cleaner gun handling. No special tools or additional hardware required—the mount uses the screws already supplied with your 1301 or A300, so installation is straightforward. Weighing just 23 grams, it adds virtually nothing to the gun's balance.
Made in the USA, this is the kind of no-nonsense accessory that works when you need it to. Whether you're running an Aimpoint ACRO or compatible Steiner MPS optic, the Saddle Mount gets your red dot on target fast and keeps it there.
| Material | Billet 7075-T6 Aluminum |
| Finish | Mil-Spec Type III Hard Coat Anodize |
| Co-Witness Height | 1/3 |
| Optic Compatibility | Aimpoint ACRO footprint (Aimpoint, Steiner MPS) |
| Gun Compatibility | Beretta 1301, Beretta A300 |
| Hardware | Uses existing 1301/A300 screws |
| Weight | 23 grams |
| Manufacture | Made in USA |
The mount accepts optics with the Aimpoint ACRO footprint, including Aimpoint and Steiner MPS compatible glass.
No. The Reptilia Saddle Mount uses the screws that come standard with your 1301 or A300, so no additional hardware is required.
1/3 co-witness positions the optic so that the factory Beretta iron sights remain visible and usable in your sight picture, providing a reliable backup if the red dot goes down.
Yes. The mount is machined from billet 7075-T6 aluminum and coated with mil-spec Type III hard coat anodize, the same finish standard used in military applications for corrosion and wear resistance.
SKU: 114464683 • Width: 5.8in • Height: 2in • Depth: 4.5in • Weight: 0.19oz