Reptilia114464725
Reptilia Dot Mount 1.93" for Holosun 509T - Black$112.46
Availability: In Stock
The Reptilia Dot Mount 1.93" for Holosun 509T in Flat Dark Earth is a purpose-built mounting solution designed to optimize your red dot sight's cheek weld and target acquisition on AR-pattern rifles and other M1913 Picatinny-railed platforms. If you run a Holosun 509T and want the optic positioned at 1.93 inches above the rail—a height that balances co-witnessing capability with natural sight picture for most shooters—this mount delivers a clean, minimal-profile installation without the bulk of traditional riser solutions.
Built from billet 7075-T6 aluminum and finished in mil-spec Type III hard anodization, the Reptilia mount is light, rigid, and built to last. The spring-loaded nitrided steel clamp and fastener sit flush with the mount body, eliminating snag points on gear or in the field. Installation is straightforward—secure it to any Picatinny rail, slip your 509T into the clamp, and you're running. There's no fiddling with shims or adapters; Reptilia engineered this for the 509T specifically.
Everything is manufactured in the USA, and Reptilia backs the mount with a lifetime warranty against manufacturer defects. Whether you're outfitting a duty rifle, a competition build, or a hunting carbine, this mount brings the precision and durability you expect from Reptilia's lineup.
| Compatibility | Holosun HE509T |
| Mount Height | 1.93 inches above rail |
| Rail Interface | M1913 Picatinny |
| Material | Billet 7075-T6 aluminum |
| Finish | Mil-spec Type III hard anodized |
| Color | Flat Dark Earth |
| Clamp | Spring-loaded nitrided steel |
| Origin | USA manufactured |
This mount is specifically designed for the Holosun HE509T. It will not fit other red dot models without verification—always confirm compatibility before purchasing.
The 1.93-inch height places your optic 1.93 inches above the M1913 Picatinny rail. This height is a popular choice for AR rifles, allowing you to achieve a natural cheek weld while maintaining capability to co-witness iron sights or use backup optics.
The mount is compatible with any M1913 Picatinny-railed platform—ARs, AKs with Picatinny adapters, or any other firearm with a standard Picatinny rail. The limiting factor is that it only holds a Holosun 509T.
No. The spring-loaded clamp simplifies the process—secure the mount to your rail, place the 509T in the clamp, and tighten the flush-mounted bolt. No shims, no fiddling.
SKU: 114463649 • Width: 4.5in • Height: 2in • Depth: 4.5in • Weight: 0.31oz
Availability: In Stock
The Reptilia Dot Mount 1.93" for Holosun 509T in Flat Dark Earth is a purpose-built mounting solution designed to optimize your red dot sight's cheek weld and target acquisition on AR-pattern rifles and other M1913 Picatinny-railed platforms. If you run a Holosun 509T and want the optic positioned at 1.93 inches above the rail—a height that balances co-witnessing capability with natural sight picture for most shooters—this mount delivers a clean, minimal-profile installation without the bulk of traditional riser solutions.
Built from billet 7075-T6 aluminum and finished in mil-spec Type III hard anodization, the Reptilia mount is light, rigid, and built to last. The spring-loaded nitrided steel clamp and fastener sit flush with the mount body, eliminating snag points on gear or in the field. Installation is straightforward—secure it to any Picatinny rail, slip your 509T into the clamp, and you're running. There's no fiddling with shims or adapters; Reptilia engineered this for the 509T specifically.
Everything is manufactured in the USA, and Reptilia backs the mount with a lifetime warranty against manufacturer defects. Whether you're outfitting a duty rifle, a competition build, or a hunting carbine, this mount brings the precision and durability you expect from Reptilia's lineup.
| Compatibility | Holosun HE509T |
| Mount Height | 1.93 inches above rail |
| Rail Interface | M1913 Picatinny |
| Material | Billet 7075-T6 aluminum |
| Finish | Mil-spec Type III hard anodized |
| Color | Flat Dark Earth |
| Clamp | Spring-loaded nitrided steel |
| Origin | USA manufactured |
This mount is specifically designed for the Holosun HE509T. It will not fit other red dot models without verification—always confirm compatibility before purchasing.
The 1.93-inch height places your optic 1.93 inches above the M1913 Picatinny rail. This height is a popular choice for AR rifles, allowing you to achieve a natural cheek weld while maintaining capability to co-witness iron sights or use backup optics.
The mount is compatible with any M1913 Picatinny-railed platform—ARs, AKs with Picatinny adapters, or any other firearm with a standard Picatinny rail. The limiting factor is that it only holds a Holosun 509T.
No. The spring-loaded clamp simplifies the process—secure the mount to your rail, place the 509T in the clamp, and tighten the flush-mounted bolt. No shims, no fiddling.
SKU: 114463649 • Width: 4.5in • Height: 2in • Depth: 4.5in • Weight: 0.31oz