Redding Reloading Equipment167526247
Redding Type S Bushing Neck Die Set 6Mm Dasher$189.61
Availability: In Stock
The Redding Type S Bushing Neck Die for 6mm Dasher gives precision reloaders a proven way to control case neck sizing with repeatable accuracy. This neck-sizing-only die is built around Redding's interchangeable bushing system, which lets you dial in neck tension in .001-inch increments to match your brass and load requirements. If you're working up loads for a 6mm Dasher and want consistent, concentric neck sizing without full-length resizing, this die delivers the control serious handloaders expect from Redding.
The Type S design uses a self-centering bushing that improves concentricity by allowing the bushing to float on the case neck itself rather than relying on the press for alignment. That means tighter velocity spreads and more forgiving shot groups downrange. The adjustable decapping rod is positioned to resize only the portion of the neck you specify—useful if you're sorting or turning necks for uniformity, or if you simply want to recycle commercial brass with minimal work.
Each die ships with a standard decapping button and a decapping pin retainer, so you can neck size without decapping if your workflow calls for it. Note that bushings are sold separately and available in .001-inch increments; you'll want to measure your sized brass or consult Redding's bushing chart to order the right fit for your load. Carbide button kits are also available if you prefer them over the standard steel option.
| Product Type | Neck sizing die (die only) |
| Caliber | 6mm Dasher |
| Style | Type S Bushing |
| Bushing Increments | .001 inch |
| Included Components | Die, standard decapping button, decapping pin retainer |
| Bushings | Sold separately |
No. The die ships without bushings. You'll need to order bushings separately in the size that matches your brass and desired neck tension. Bushings are available in .001-inch increments.
This is a neck-sizing-only die. The adjustable decapping rod lets you control how much of the neck gets sized, but it won't resize the body or shoulder like a full-length die.
The die includes a standard decapping button, a decapping pin retainer (so you can neck size without decapping if desired), and the die itself. Bushings and carbide button kits are ordered separately.
This die is designed for standard reloading presses that accept standard die threads. Verify your press compatibility before ordering if you're unsure.
SKU: 167525711 • Width: 4.4in • Height: 1.75in • Depth: 5.9in • Weight: 0.725oz
Availability: In Stock
The Redding Type S Bushing Neck Die for 6mm Dasher gives precision reloaders a proven way to control case neck sizing with repeatable accuracy. This neck-sizing-only die is built around Redding's interchangeable bushing system, which lets you dial in neck tension in .001-inch increments to match your brass and load requirements. If you're working up loads for a 6mm Dasher and want consistent, concentric neck sizing without full-length resizing, this die delivers the control serious handloaders expect from Redding.
The Type S design uses a self-centering bushing that improves concentricity by allowing the bushing to float on the case neck itself rather than relying on the press for alignment. That means tighter velocity spreads and more forgiving shot groups downrange. The adjustable decapping rod is positioned to resize only the portion of the neck you specify—useful if you're sorting or turning necks for uniformity, or if you simply want to recycle commercial brass with minimal work.
Each die ships with a standard decapping button and a decapping pin retainer, so you can neck size without decapping if your workflow calls for it. Note that bushings are sold separately and available in .001-inch increments; you'll want to measure your sized brass or consult Redding's bushing chart to order the right fit for your load. Carbide button kits are also available if you prefer them over the standard steel option.
| Product Type | Neck sizing die (die only) |
| Caliber | 6mm Dasher |
| Style | Type S Bushing |
| Bushing Increments | .001 inch |
| Included Components | Die, standard decapping button, decapping pin retainer |
| Bushings | Sold separately |
No. The die ships without bushings. You'll need to order bushings separately in the size that matches your brass and desired neck tension. Bushings are available in .001-inch increments.
This is a neck-sizing-only die. The adjustable decapping rod lets you control how much of the neck gets sized, but it won't resize the body or shoulder like a full-length die.
The die includes a standard decapping button, a decapping pin retainer (so you can neck size without decapping if desired), and the die itself. Bushings and carbide button kits are ordered separately.
This die is designed for standard reloading presses that accept standard die threads. Verify your press compatibility before ordering if you're unsure.
SKU: 167525711 • Width: 4.4in • Height: 1.75in • Depth: 5.9in • Weight: 0.725oz