
Availability: In Stock
The Redding Titanium Nitride Bushing/.326 is a precision neck-sizing component for handloaders who demand reduced friction and extended die life. If you're running a progressive or single-stage press and want smoother case sizing with less wear on your dies, this bushing replaces the standard steel option with a hard-coated alternative that cuts friction while maintaining the tight neck control that competitive and precision reloaders depend on.
Redding's titanium nitride coating adds real surface hardness to heat-treated steel, so you're not just getting a cosmetic upgrade—you're getting a bushing that sized cases with noticeably lower resistance and resists the scoring and galling that can degrade standard bushings over thousands of rounds. The .326" size fits the Redding Neck Sizing Die system, which uses interchangeable bushings to fine-tune neck tension for different cartridges and bullet diameters.
Reloaders who shoot 8mm cartridges like the 8x57JS, or who need a .326" neck diameter for custom builds, will find this bushing delivers the precision fit without the maintenance headaches of uncoated steel. Since Redding makes bushings in .001" increments across the full range, you can dial in your exact neck tension—a critical detail for shooters chasing consistency at distance or on the competition line.
| Bushing Size | .326" |
| Material | Heat-treated steel with titanium nitride coating |
| Coating | Titanium nitride for reduced friction |
| Brand | Redding |
The .326" bushing is commonly used for 8mm cartridges like the 8x57JS, as well as custom builds and wildcat rounds that require a .326" neck diameter. Check your specific cartridge specs or work with your reloading manual to confirm the correct bushing size for your ammunition.
Yes, if you reload volume and want to reduce die wear and sizing friction. The hard coating resists scoring and galling, which means smoother operation and longer die life. For precision shooting where consistency matters, the reduced friction also helps maintain tighter control over neck tension.
This bushing is designed for the Redding Neck Sizing Die system. Confirm that your Redding neck-sizing die is set up for interchangeable bushings before ordering.
No—Redding bushings are specific to Redding Neck Sizing Dies. They are not compatible with other manufacturers' sizing systems.
SKU: 197558594 • Weight: 0.1oz






Availability: In Stock
The Redding Titanium Nitride Bushing/.326 is a precision neck-sizing component for handloaders who demand reduced friction and extended die life. If you're running a progressive or single-stage press and want smoother case sizing with less wear on your dies, this bushing replaces the standard steel option with a hard-coated alternative that cuts friction while maintaining the tight neck control that competitive and precision reloaders depend on.
Redding's titanium nitride coating adds real surface hardness to heat-treated steel, so you're not just getting a cosmetic upgrade—you're getting a bushing that sized cases with noticeably lower resistance and resists the scoring and galling that can degrade standard bushings over thousands of rounds. The .326" size fits the Redding Neck Sizing Die system, which uses interchangeable bushings to fine-tune neck tension for different cartridges and bullet diameters.
Reloaders who shoot 8mm cartridges like the 8x57JS, or who need a .326" neck diameter for custom builds, will find this bushing delivers the precision fit without the maintenance headaches of uncoated steel. Since Redding makes bushings in .001" increments across the full range, you can dial in your exact neck tension—a critical detail for shooters chasing consistency at distance or on the competition line.
| Bushing Size | .326" |
| Material | Heat-treated steel with titanium nitride coating |
| Coating | Titanium nitride for reduced friction |
| Brand | Redding |
The .326" bushing is commonly used for 8mm cartridges like the 8x57JS, as well as custom builds and wildcat rounds that require a .326" neck diameter. Check your specific cartridge specs or work with your reloading manual to confirm the correct bushing size for your ammunition.
Yes, if you reload volume and want to reduce die wear and sizing friction. The hard coating resists scoring and galling, which means smoother operation and longer die life. For precision shooting where consistency matters, the reduced friction also helps maintain tighter control over neck tension.
This bushing is designed for the Redding Neck Sizing Die system. Confirm that your Redding neck-sizing die is set up for interchangeable bushings before ordering.
No—Redding bushings are specific to Redding Neck Sizing Dies. They are not compatible with other manufacturers' sizing systems.
SKU: 197558594 • Weight: 0.1oz
