Redding Reloading Equipment197558064
Redding Tapered Sizing Button, 6Mm, Range 17 Cal To 6Mm$16.96
Loading...
Loading...
Loading...
Availability: In Stock
The Redding Tapered Sizing Button in 30 caliber is a precision replacement component for reloaders working with bottleneck cartridges in the 6mm to 30 caliber range. This expander button handles the critical task of opening fired case necks to the proper diameter for bullet seating, a fundamental step in producing ammunition that chambers cleanly and performs consistently. If you're running a Redding Standard or Type S sizing die and need to replace a worn button or upgrade your setup, this is the part that keeps your reloading operation running smoothly.
Redding's tapered design helps control how the case neck expands, which translates to more uniform neck tension across your loaded rounds. Inconsistent neck fit can lead to velocity variation and accuracy issues downrange, so getting this detail right matters. The button works in harmony with your sizing die to prepare cases properly before the bullet is seated, making it one of those unsexy-but-essential components that separates careful handloaders from careless ones.
This is a true replacement part—not a complete die, just the button itself—so make sure you already have a compatible Redding Standard or Type S die before ordering. It's the kind of thing you might not think about until your current button shows wear, but once you need it, you need it. Redding's reputation for tight tolerances and reliable performance carries through to their replacement parts, so you're getting the same quality control that goes into their full die sets.
| Brand | Redding |
| Type | Tapered Sizing Button |
| Caliber | 30 Cal |
| Caliber Range | 6mm to 30 Cal |
| Compatible Dies | Redding Standard and Type S sizing dies |
| Decap Rod Included | No |
This tapered sizing button is designed for use only in Redding Standard and Type S sizing dies. It will not work with other die styles. Check your current die to confirm compatibility before ordering.
This 30 caliber button handles bottleneck cartridges ranging from 6mm up to 30 caliber, so it covers common cartridges like 6mm Creedmoor, .308 Winchester, .30-06 Springfield, and many others in that spectrum.
No, the decap rod is not included. This is the expander button only. If you need a decap rod, you'll order that separately.
Tapered buttons wear over time with use. If you notice inconsistent case neck sizing, difficulty fitting the button into the die, or visible wear on the tapered surface, it's time for a replacement.
SKU: 197558019 • Weight: 0.01oz
Availability: In Stock
The Redding Tapered Sizing Button in 30 caliber is a precision replacement component for reloaders working with bottleneck cartridges in the 6mm to 30 caliber range. This expander button handles the critical task of opening fired case necks to the proper diameter for bullet seating, a fundamental step in producing ammunition that chambers cleanly and performs consistently. If you're running a Redding Standard or Type S sizing die and need to replace a worn button or upgrade your setup, this is the part that keeps your reloading operation running smoothly.
Redding's tapered design helps control how the case neck expands, which translates to more uniform neck tension across your loaded rounds. Inconsistent neck fit can lead to velocity variation and accuracy issues downrange, so getting this detail right matters. The button works in harmony with your sizing die to prepare cases properly before the bullet is seated, making it one of those unsexy-but-essential components that separates careful handloaders from careless ones.
This is a true replacement part—not a complete die, just the button itself—so make sure you already have a compatible Redding Standard or Type S die before ordering. It's the kind of thing you might not think about until your current button shows wear, but once you need it, you need it. Redding's reputation for tight tolerances and reliable performance carries through to their replacement parts, so you're getting the same quality control that goes into their full die sets.
| Brand | Redding |
| Type | Tapered Sizing Button |
| Caliber | 30 Cal |
| Caliber Range | 6mm to 30 Cal |
| Compatible Dies | Redding Standard and Type S sizing dies |
| Decap Rod Included | No |
This tapered sizing button is designed for use only in Redding Standard and Type S sizing dies. It will not work with other die styles. Check your current die to confirm compatibility before ordering.
This 30 caliber button handles bottleneck cartridges ranging from 6mm up to 30 caliber, so it covers common cartridges like 6mm Creedmoor, .308 Winchester, .30-06 Springfield, and many others in that spectrum.
No, the decap rod is not included. This is the expander button only. If you need a decap rod, you'll order that separately.
Tapered buttons wear over time with use. If you notice inconsistent case neck sizing, difficulty fitting the button into the die, or visible wear on the tapered surface, it's time for a replacement.
SKU: 197558019 • Weight: 0.01oz