$55.43
Loading...
Loading...
Loading...
Availability: In Stock
If you're reloading for a tight-chambered 30-06 Springfield—whether you've got a custom match rifle or a precision build with a chamber cut tighter than standard—the Redding Small Base Body Die is built to handle it. This specialized rifle die sizes the body and shoulder of your brass while leaving the neck untouched, giving you the dimensional control that non-standard chambers demand. Where a conventional full-length die might not work with your custom setup, a small base body die bridges that gap, letting you safely and consistently reload for firearms that don't follow SAAMI spec.
Reloaders working with tight chambers often run into trouble with standard dies: brass that doesn't fit, or excessive force needed to get cases into the chamber. A small base body die solves this by focusing the sizing stroke on the critical body and shoulder areas. This approach preserves neck dimensions you've already established and lets you maintain fired-in brass that's optimized for your particular rifle. It's a straightforward, no-nonsense solution for anyone serious enough to own or build a custom-chambered 30-06.
The die itself comes without a decapping rod, so you'll handle decapping separately—either with a press-mounted rod or a dedicated decapper. This gives you flexibility in your reloading setup and means you can use the body die in sequence with whatever decapping method suits your workflow.
| Caliber | 30-06 Springfield |
| Die Type | Small Base Body Die |
| Brand | Redding |
| Decapping Rod | Not included |
A small base body die sizes only the body and shoulder of your brass, leaving the neck untouched. A full-length die sizes the entire case, including the neck. Small base dies are designed for custom-chambered firearms with dimensions tighter than SAAMI spec, where a standard die might cause feeding or chambering problems.
No—this die is engineered specifically for 30-06 rifles with custom chambers cut tighter than SAAMI specifications. If your rifle has a standard SAAMI chamber, use a conventional full-length die instead.
No, this die is sold without a decapping rod. You'll need to handle decapping separately using a press-mounted rod, a dedicated decapper, or whichever method fits your reloading setup.
Redding dies are standard 7/8-inch (0.875") diameter and will fit any reloading press with standard die holes. The specific press compatibility depends on your equipment—check that your press accepts standard-sized dies.
SKU: 197558637 • Weight: 0.3oz
Availability: In Stock
If you're reloading for a tight-chambered 30-06 Springfield—whether you've got a custom match rifle or a precision build with a chamber cut tighter than standard—the Redding Small Base Body Die is built to handle it. This specialized rifle die sizes the body and shoulder of your brass while leaving the neck untouched, giving you the dimensional control that non-standard chambers demand. Where a conventional full-length die might not work with your custom setup, a small base body die bridges that gap, letting you safely and consistently reload for firearms that don't follow SAAMI spec.
Reloaders working with tight chambers often run into trouble with standard dies: brass that doesn't fit, or excessive force needed to get cases into the chamber. A small base body die solves this by focusing the sizing stroke on the critical body and shoulder areas. This approach preserves neck dimensions you've already established and lets you maintain fired-in brass that's optimized for your particular rifle. It's a straightforward, no-nonsense solution for anyone serious enough to own or build a custom-chambered 30-06.
The die itself comes without a decapping rod, so you'll handle decapping separately—either with a press-mounted rod or a dedicated decapper. This gives you flexibility in your reloading setup and means you can use the body die in sequence with whatever decapping method suits your workflow.
| Caliber | 30-06 Springfield |
| Die Type | Small Base Body Die |
| Brand | Redding |
| Decapping Rod | Not included |
A small base body die sizes only the body and shoulder of your brass, leaving the neck untouched. A full-length die sizes the entire case, including the neck. Small base dies are designed for custom-chambered firearms with dimensions tighter than SAAMI spec, where a standard die might cause feeding or chambering problems.
No—this die is engineered specifically for 30-06 rifles with custom chambers cut tighter than SAAMI specifications. If your rifle has a standard SAAMI chamber, use a conventional full-length die instead.
No, this die is sold without a decapping rod. You'll need to handle decapping separately using a press-mounted rod, a dedicated decapper, or whichever method fits your reloading setup.
Redding dies are standard 7/8-inch (0.875") diameter and will fit any reloading press with standard die holes. The specific press compatibility depends on your equipment—check that your press accepts standard-sized dies.
SKU: 197558637 • Weight: 0.3oz