Hornady197550855
Hornady Taper Crimp Die For Series II 3-die Taper Crimp Pistol Die Set 9mm .38 Super$28.55
Availability: In Stock
The Redding Adjustable Taper Crimp Die for 38 Super/9mm is built for reloaders who want to dial in their crimps without breaking down their press every time they need to fine-tune. This top-adjusting design keeps the die in place while you work, making it especially valuable if you're running volume through a progressive press or working with multiple calibers at the same station. The knurled micrometer-type adjustment barrel gives you roughly ±.100" of range to dial your crimp depth precisely, so you're not guessing whether your bullet is seated right or pulling everything apart to try again.
Inside, Redding uses a hardened steel sleeve that forms the crimp itself. Here's the clever bit: the sleeve is double-ended, with a different taper ground at each end. That means you can flip it around to crimp a second, related-size cartridge without swapping dies—handy if you're loading both 38 Super and 9mm, or splitting your time between similar rounds. Once you lock in the initial setup height, the micrometer dial lets you make repeatable adjustments on the fly, which keeps your production moving and your crimp consistency tight.
Whether you're a progressive reloader stacking volume or someone who switches between 38 Super and 9mm and wants to save bench space and changeover time, this die cuts out the repetitive unscrew-adjust-screw cycle that slows down your reloading day. It's the kind of purposeful engineering that separates a tool designed for real work from something generic.
| Brand | Redding |
| Product Type | Adjustable Taper Crimp Die |
| Caliber | 38 Super / 9mm |
| Adjustment Range | Approximately ±.100" |
| Internal Component | Hardened steel sleeve (double-ended) |
| Adjustment Type | Top-adjusting, micrometer-type knurled barrel |
Yes. The hardened steel sleeve inside is double-ended, with a specific taper ground at each end. You can flip the sleeve around to crimp a second, related-size cartridge, so it works for both calibers without changing dies.
No—that's the whole point of the top-adjusting design. You adjust the knurled micrometer-type barrel while the die stays in place on your press, which saves time and keeps your setup consistent, especially on a progressive reloader.
The knurled barrel provides approximately ±.100" of adjustment after your initial setup, so you have room to dial in the perfect crimp without major repositioning.
SKU: 194195431 • Weight: 0.8oz
Availability: In Stock
The Redding Adjustable Taper Crimp Die for 38 Super/9mm is built for reloaders who want to dial in their crimps without breaking down their press every time they need to fine-tune. This top-adjusting design keeps the die in place while you work, making it especially valuable if you're running volume through a progressive press or working with multiple calibers at the same station. The knurled micrometer-type adjustment barrel gives you roughly ±.100" of range to dial your crimp depth precisely, so you're not guessing whether your bullet is seated right or pulling everything apart to try again.
Inside, Redding uses a hardened steel sleeve that forms the crimp itself. Here's the clever bit: the sleeve is double-ended, with a different taper ground at each end. That means you can flip it around to crimp a second, related-size cartridge without swapping dies—handy if you're loading both 38 Super and 9mm, or splitting your time between similar rounds. Once you lock in the initial setup height, the micrometer dial lets you make repeatable adjustments on the fly, which keeps your production moving and your crimp consistency tight.
Whether you're a progressive reloader stacking volume or someone who switches between 38 Super and 9mm and wants to save bench space and changeover time, this die cuts out the repetitive unscrew-adjust-screw cycle that slows down your reloading day. It's the kind of purposeful engineering that separates a tool designed for real work from something generic.
| Brand | Redding |
| Product Type | Adjustable Taper Crimp Die |
| Caliber | 38 Super / 9mm |
| Adjustment Range | Approximately ±.100" |
| Internal Component | Hardened steel sleeve (double-ended) |
| Adjustment Type | Top-adjusting, micrometer-type knurled barrel |
Yes. The hardened steel sleeve inside is double-ended, with a specific taper ground at each end. You can flip the sleeve around to crimp a second, related-size cartridge, so it works for both calibers without changing dies.
No—that's the whole point of the top-adjusting design. You adjust the knurled micrometer-type barrel while the die stays in place on your press, which saves time and keeps your setup consistent, especially on a progressive reloader.
The knurled barrel provides approximately ±.100" of adjustment after your initial setup, so you have room to dial in the perfect crimp without major repositioning.
SKU: 194195431 • Weight: 0.8oz