Redding Reloading Equipment167529543
Redding 7Mm Remington Magnum Competition Bushing Neck Die Set$315.53
Availability: In Stock
The Redding 7mm Remington SAUM Competition Bushing Neck Die Set is purpose-built for precision handloaders who demand consistent, match-grade ammunition. This three-die set—featuring a competition bushing neck sizing die, body die, and competition bullet seater—gives you the control needed to squeeze every bit of accuracy from your 7mm SAUM rounds. Whether you're prepping for a precision rifle match or fine-tuning loads for long-range hunting, this system puts repeatability in your hands through intelligent engineering and micrometer-adjustable components.
The neck sizing die is where Redding's competition heritage shines. Rather than forcing your case through a fixed opening, the die fully supports and aligns your case before sizing begins. As you stroke upward, a tightly chambered sliding sleeve keeps the case stable while a self-centering sizing bushing—your choice of diameter, sold separately—controls how much material you remove from the neck. This approach preserves case neck concentricity and minimizes runout, critical for groups that count. A precision decapping rod rides on internal die components for the same alignment as your rifle's firing pin, maintaining that accuracy standard throughout the process.
The included body die handles full-length resizing and shoulder bump independently, letting you position the shoulder for reliable chambering without touching the neck you just sized. The competition bullet seater takes the final step with exceptional precision: a floating seating stem with manufacturing tolerances so tight it literally floats within the guide, centering bullets with minimal variance. Combined with micrometer adjustment on both the neck die and seater, you've got the fine-tuning leverage serious reloaders expect from Redding competition gear.
Note that bushings and shellholder are sold separately—this lets you build a setup matched to your exact case and press. If you're serious about handloading ammunition that performs, this die set rewards attention to detail.
| Product | 7mm Remington SAUM Competition Bushing Neck Die Set |
| Brand | Redding |
| Cartridge | 7mm Remington SAUM |
| Die Type | 3-Die Set (Competition Bushing Neck Die, Body Die, Competition Bullet Seater) |
| Adjustments | Micrometer (neck sizing die and seater) |
| Bushing | Sold separately |
| Shellholder | Sold separately |
The Redding 7mm Remington SAUM Competition set includes three dies: a competition bushing neck sizing die, a body die for full-length resizing and shoulder bumping, and a competition bullet seater with micrometer adjustment. Bushings and a shellholder are not included and must be purchased separately.
Yes. The bushing neck sizing die works with interchangeable bushings (sold separately) that you select based on your case dimensions and desired neck tension. You'll also need to purchase a shellholder separately to fit your reloading press.
The competition bushing neck die fully supports and aligns your case before sizing begins, keeping it stable throughout the process. A self-centering sizing bushing controls the amount of material removed from the neck, minimizing runout and improving case neck concentricity—critical for precision shooting. The decapping rod is aligned by internal die components, similar to a rifle's firing pin, for consistent performance.
Yes. This competition-grade set is designed for handloaders preparing precision rifle ammunition. The micrometer adjustments, floating seating stem, and tight manufacturing tolerances give you the control needed for match-grade loads.
SKU: 167529569 • Weight: 1.9oz
Availability: In Stock
The Redding 7mm Remington SAUM Competition Bushing Neck Die Set is purpose-built for precision handloaders who demand consistent, match-grade ammunition. This three-die set—featuring a competition bushing neck sizing die, body die, and competition bullet seater—gives you the control needed to squeeze every bit of accuracy from your 7mm SAUM rounds. Whether you're prepping for a precision rifle match or fine-tuning loads for long-range hunting, this system puts repeatability in your hands through intelligent engineering and micrometer-adjustable components.
The neck sizing die is where Redding's competition heritage shines. Rather than forcing your case through a fixed opening, the die fully supports and aligns your case before sizing begins. As you stroke upward, a tightly chambered sliding sleeve keeps the case stable while a self-centering sizing bushing—your choice of diameter, sold separately—controls how much material you remove from the neck. This approach preserves case neck concentricity and minimizes runout, critical for groups that count. A precision decapping rod rides on internal die components for the same alignment as your rifle's firing pin, maintaining that accuracy standard throughout the process.
The included body die handles full-length resizing and shoulder bump independently, letting you position the shoulder for reliable chambering without touching the neck you just sized. The competition bullet seater takes the final step with exceptional precision: a floating seating stem with manufacturing tolerances so tight it literally floats within the guide, centering bullets with minimal variance. Combined with micrometer adjustment on both the neck die and seater, you've got the fine-tuning leverage serious reloaders expect from Redding competition gear.
Note that bushings and shellholder are sold separately—this lets you build a setup matched to your exact case and press. If you're serious about handloading ammunition that performs, this die set rewards attention to detail.
| Product | 7mm Remington SAUM Competition Bushing Neck Die Set |
| Brand | Redding |
| Cartridge | 7mm Remington SAUM |
| Die Type | 3-Die Set (Competition Bushing Neck Die, Body Die, Competition Bullet Seater) |
| Adjustments | Micrometer (neck sizing die and seater) |
| Bushing | Sold separately |
| Shellholder | Sold separately |
The Redding 7mm Remington SAUM Competition set includes three dies: a competition bushing neck sizing die, a body die for full-length resizing and shoulder bumping, and a competition bullet seater with micrometer adjustment. Bushings and a shellholder are not included and must be purchased separately.
Yes. The bushing neck sizing die works with interchangeable bushings (sold separately) that you select based on your case dimensions and desired neck tension. You'll also need to purchase a shellholder separately to fit your reloading press.
The competition bushing neck die fully supports and aligns your case before sizing begins, keeping it stable throughout the process. A self-centering sizing bushing controls the amount of material removed from the neck, minimizing runout and improving case neck concentricity—critical for precision shooting. The decapping rod is aligned by internal die components, similar to a rifle's firing pin, for consistent performance.
Yes. This competition-grade set is designed for handloaders preparing precision rifle ammunition. The micrometer adjustments, floating seating stem, and tight manufacturing tolerances give you the control needed for match-grade loads.
SKU: 167529569 • Weight: 1.9oz