Redding Reloading Equipment167522124
Competition Bushing Neck Die Set 6.5 X 47 Lapua$379.03
Availability: In Stock
The Redding 6.5 Grendel Competition Bushing Neck Die Set is a three-die reloading system built for handloaders who demand tight neck control and repeatability. If you're loading for a 6.5 Grendel and you want to dial in ammunition that chambers with confidence and groups consistently, this set combines Redding's competition-grade tooling in one package: a Competition Bushing Neck Sizing Die, a Body Die, and a Competition Bullet Seater—all equipped with micrometer adjustments for precision tuning.
The Competition Bushing Neck Die uses a sliding sleeve design that completely supports and aligns the case neck before sizing begins. As you raise the case, the resizing bushing self-centers on the neck while the decapping rod stays in precise alignment—much like a firing pin inside the die itself. The micrometer adjustment lets you control neck length sizing with the kind of repeatability that competitive reloaders expect. The Body Die handles full-length resizing of the case body and bumps the shoulder for proper fit without touching the neck you just finished tuning. The Competition Bullet Seater employs a floating stem system with extremely tight manufacturing tolerances; the bullet guide and seating stem fit so precisely that the stem can actually float, allowing the bullet to find its own center in the case mouth.
This is serious reloading kit for 6.5 Grendel shooters who are loading for accuracy—whether you're prepping match ammo or hunting loads where every round needs to perform the same way. Bushings and shellholder are sold separately, so you'll need to source those to complete the setup.
| Brand | Redding |
| Product Type | Bushing Neck Die Set |
| Caliber | 6.5 Grendel |
| Includes | Competition Bushing Neck Sizing Die, Body Die, Competition Bullet Seater |
| Adjustments | Micrometer (Neck Die and Seater) |
| Accessories Needed | Bushings, Shellholder (sold separately) |
The set contains three dies: a Competition Bushing Neck Sizing Die, a Body Die, and a Competition Bullet Seater. Both the neck die and seater feature micrometer adjustments for fine control. Bushings and a shellholder are sold separately.
Yes. Bushings and a shellholder are not included and must be purchased separately to use this die set.
A bushing neck die allows you to size only the neck while leaving the body and shoulder untouched, which is valuable for reloaders seeking maximum case life and tighter consistency. The self-centering bushing and micrometer adjustment give you precise control over how much the neck is sized, enabling the kind of repeatability that competitive and precision loading demands.
Yes. The competition-grade features—micrometer adjustments, tight tolerances, and bushing neck sizing—benefit any handloader working with 6.5 Grendel who values consistent, reliable ammunition.
SKU: 167528866 • Weight: 2oz
Availability: In Stock
The Redding 6.5 Grendel Competition Bushing Neck Die Set is a three-die reloading system built for handloaders who demand tight neck control and repeatability. If you're loading for a 6.5 Grendel and you want to dial in ammunition that chambers with confidence and groups consistently, this set combines Redding's competition-grade tooling in one package: a Competition Bushing Neck Sizing Die, a Body Die, and a Competition Bullet Seater—all equipped with micrometer adjustments for precision tuning.
The Competition Bushing Neck Die uses a sliding sleeve design that completely supports and aligns the case neck before sizing begins. As you raise the case, the resizing bushing self-centers on the neck while the decapping rod stays in precise alignment—much like a firing pin inside the die itself. The micrometer adjustment lets you control neck length sizing with the kind of repeatability that competitive reloaders expect. The Body Die handles full-length resizing of the case body and bumps the shoulder for proper fit without touching the neck you just finished tuning. The Competition Bullet Seater employs a floating stem system with extremely tight manufacturing tolerances; the bullet guide and seating stem fit so precisely that the stem can actually float, allowing the bullet to find its own center in the case mouth.
This is serious reloading kit for 6.5 Grendel shooters who are loading for accuracy—whether you're prepping match ammo or hunting loads where every round needs to perform the same way. Bushings and shellholder are sold separately, so you'll need to source those to complete the setup.
| Brand | Redding |
| Product Type | Bushing Neck Die Set |
| Caliber | 6.5 Grendel |
| Includes | Competition Bushing Neck Sizing Die, Body Die, Competition Bullet Seater |
| Adjustments | Micrometer (Neck Die and Seater) |
| Accessories Needed | Bushings, Shellholder (sold separately) |
The set contains three dies: a Competition Bushing Neck Sizing Die, a Body Die, and a Competition Bullet Seater. Both the neck die and seater feature micrometer adjustments for fine control. Bushings and a shellholder are sold separately.
Yes. Bushings and a shellholder are not included and must be purchased separately to use this die set.
A bushing neck die allows you to size only the neck while leaving the body and shoulder untouched, which is valuable for reloaders seeking maximum case life and tighter consistency. The self-centering bushing and micrometer adjustment give you precise control over how much the neck is sized, enabling the kind of repeatability that competitive and precision loading demands.
Yes. The competition-grade features—micrometer adjustments, tight tolerances, and bushing neck sizing—benefit any handloader working with 6.5 Grendel who values consistent, reliable ammunition.
SKU: 167528866 • Weight: 2oz