Redding 30-06 Springfield Bushing Full Length Die Set

If you're serious about handloading precise 30-06 Springfield ammunition, the Redding 30-06 Springfield Bushing Full Length Die Set gives you the control that matters. This two-die set pairs a Type S Bushing Full Sizing Die with a Competition Bullet Seating Die—the core tools for reloaders who demand consistency and tight tolerances. Whether you're working up loads for a match rifle or fine-tuning hunting rounds, this setup lets you dial in neck tension and seating concentricity without the guesswork.

The Type S Bushing Full Sizing Die is the linchpin here. It performs full-length resizing while letting you manage case neck tension through interchangeable bushings—meaning you can choose exactly how much neck control suits your setup and brass condition. That precision is what separates careful handloading from just going through the motions.

The Competition Bullet Seating Die brings its own refinement to the table. A micrometer calibrated in .001" increments lets you dial bullet seating depth to the nearest thousandth, and the floating seating stem minimizes runout and concentricity issues that throw off accuracy. For long-range work or competition loading, that kind of control compounds into better results downrange.

Redding dies are built to last and designed for folks who reload in volume—whether that's a few boxes a month or serious pre-season preparation. This set is purpose-built for 30-06 Springfield and gives you the mechanical advantage to turn brass and bullets into ammunition you trust.

Key Features

• Type S Bushing Full Sizing Die with interchangeable bushings for custom neck tension control
• Competition Bullet Seating Die with .001" micrometer increment adjustment
• Floating seating stem to reduce bullet concentricity issues
• Full-length resizing capability while maintaining precise case neck management
• Purpose-built for 30-06 Springfield cartridge

Specifications

Caliber	30-06 Springfield
Die Type	Bushing Full Length Die Set
Components Included	Type S Bushing Full Sizing Die, Competition Bullet Seating Die
Seating Micrometer Increment	.001"
Bushing System	Interchangeable bushings (sold separately)

Frequently Asked Questions

What's included in this die set?

The set contains two dies: a Type S Bushing Full Sizing Die and a Competition Bullet Seating Die. You'll need a compatible press and other standard reloading gear to use them. Interchangeable bushings are sold separately.

Can I adjust neck tension with these dies?

Yes. The Type S Bushing Full Sizing Die uses interchangeable bushings that let you control how much the case neck is sized, so you can set neck tension to match your brass and firearm.

How precise is the seating die?

The Competition Bullet Seating Die features a micrometer calibrated in .001" increments, and the floating seating stem helps you achieve consistent, concentric bullet seating to minimize runout.

Is this set compatible with my 30-06 Springfield?

These dies are specifically designed for 30-06 Springfield. Verify your press compatibility and that you have the appropriate reloading equipment before ordering.