Redding Reloading Equipment167523923
Redding Type S Elite Die Set .224 Valkyrie$283.94
Loading...
Loading...
Loading...
Availability: In Stock
The Redding 224 Valkyrie Type S Full Die is a precision full-length rifle reloading die built for handloaders who demand concentricity and neck control in a single operation. If you're developing 224 Valkyrie loads and want to resize the case body while maintaining exact command of the case neck, this Type S bushing die delivers the control Redding is known for—without forcing you to run a separate neck-sizing step.
What sets the Type S apart is its bushing system. The interchangeable bushings (the same design used in Redding's dedicated neck-sizing dies) self-center on the case neck, which means better concentricity right out of the press. The adjustable decapping rod lets you fine-tune exactly how much of the neck gets sized, giving you flexibility to match your brass and your load requirements. Want to size only part of the neck? You can do that. Need full-length sizing for fireforming or when running mixed brass? No problem.
The die ships with both a standard sizing button and a decapping pin retainer, so you're covered for different reloading workflows. And here's a bonus for the DIY reloader: remove the bushing and internal parts, and you've got a body die. That versatility means you can adapt your reloading setup as your needs change, without buying another die.
Built to Redding's exacting standards and designed for cartridges like the 224 Valkyrie, this is a workhorse die for serious handloaders chasing precision at the press.
| Cartridge | 224 Valkyrie |
| Die Type | Type S Bushing Full Length Sizing Die |
| Manufacturer | Redding |
The Type S uses an interchangeable bushing system that self-centers on the case neck, giving you independent control over neck sizing while the body is resized in the same stroke. This means better concentricity and the ability to adjust how much of the neck gets sized without a separate operation.
The die comes with both a standard sizing button and a decapping pin retainer. You'll want to confirm which bushing size matches your brass; Redding bushings are interchangeable across their Type S dies, so you can tailor fit for your specific cartridge.
Yes. Remove the bushing and all internal components, and the Type S Bushing Full Die functions as a body die. This gives you the flexibility to switch roles depending on your reloading needs.
Yes, this die is chambered for 224 Valkyrie and designed to handle full-length resizing and neck control for that cartridge.
SKU: 167523911 • Width: 4.5in • Height: 1.75in • Depth: 6in • Weight: 0.745oz
Availability: In Stock
The Redding 224 Valkyrie Type S Full Die is a precision full-length rifle reloading die built for handloaders who demand concentricity and neck control in a single operation. If you're developing 224 Valkyrie loads and want to resize the case body while maintaining exact command of the case neck, this Type S bushing die delivers the control Redding is known for—without forcing you to run a separate neck-sizing step.
What sets the Type S apart is its bushing system. The interchangeable bushings (the same design used in Redding's dedicated neck-sizing dies) self-center on the case neck, which means better concentricity right out of the press. The adjustable decapping rod lets you fine-tune exactly how much of the neck gets sized, giving you flexibility to match your brass and your load requirements. Want to size only part of the neck? You can do that. Need full-length sizing for fireforming or when running mixed brass? No problem.
The die ships with both a standard sizing button and a decapping pin retainer, so you're covered for different reloading workflows. And here's a bonus for the DIY reloader: remove the bushing and internal parts, and you've got a body die. That versatility means you can adapt your reloading setup as your needs change, without buying another die.
Built to Redding's exacting standards and designed for cartridges like the 224 Valkyrie, this is a workhorse die for serious handloaders chasing precision at the press.
| Cartridge | 224 Valkyrie |
| Die Type | Type S Bushing Full Length Sizing Die |
| Manufacturer | Redding |
The Type S uses an interchangeable bushing system that self-centers on the case neck, giving you independent control over neck sizing while the body is resized in the same stroke. This means better concentricity and the ability to adjust how much of the neck gets sized without a separate operation.
The die comes with both a standard sizing button and a decapping pin retainer. You'll want to confirm which bushing size matches your brass; Redding bushings are interchangeable across their Type S dies, so you can tailor fit for your specific cartridge.
Yes. Remove the bushing and all internal components, and the Type S Bushing Full Die functions as a body die. This gives you the flexibility to switch roles depending on your reloading needs.
Yes, this die is chambered for 224 Valkyrie and designed to handle full-length resizing and neck control for that cartridge.
SKU: 167523911 • Width: 4.5in • Height: 1.75in • Depth: 6in • Weight: 0.745oz