Redding Reloading Equipment167522132
Redding 22 Arc Full Length Die Set$84.24
Availability: In Stock
The Redding 22 ARC full length sizing die is an essential tool for reloaders who need to process bottleneck cases for the 22 ARC cartridge. If you're setting up a 22 ARC handloading operation or expanding an existing press setup, this full length die ensures your fired cases are resized to factory dimensions for reliable chambering and consistent performance. The FL sizing die handles the critical step of bringing your brass back to spec after firing.
This die includes a built-in decapping rod assembly that removes spent primers as part of the resizing stroke, streamlining your prep work. A neck expander button is integrated into the die itself, so it sizes the case neck down and simultaneously expands it to the correct inside diameter for bullet seating—a one-step operation that saves time and maintains case concentricity.
Redding dies are known for precision tolerances and consistent performance across thousands of loading cycles. Whether you're loading for precision target work, hunting, or high-volume practice, this full length sizing die is built to last and deliver the accuracy your 22 ARC loads demand. Note that a shellholder is required separately for use in your press—make sure you grab the appropriate shellholder (Redding #12) if you don't already have one.
| Cartridge | 22 ARC |
| Die Type | Full Length Sizing Die |
| Included Components | Die body, decapping rod assembly, neck expander button |
| Shellholder | Not included (Redding #12 required) |
A full length sizing die resizes the entire fired case back to factory dimensions. This includes the case body, shoulder, and neck, ensuring that once-fired brass will chamber reliably in your rifle and maintaining consistency shot to shot.
Yes. The integrated decapping rod assembly removes the spent primer as the case is pushed into the die during the resizing stroke, eliminating the need for a separate decapping step.
Yes. The shellholder is not included with this die. You'll need Redding shellholder #12 to use this die in a standard reloading press.
No. This die is sized specifically for the 22 ARC cartridge and should only be used with 22 ARC brass.
SKU: 167522140 • Width: 2.75in • Height: 1.75in • Depth: 6in • Weight: 0.59oz
Availability: In Stock
The Redding 22 ARC full length sizing die is an essential tool for reloaders who need to process bottleneck cases for the 22 ARC cartridge. If you're setting up a 22 ARC handloading operation or expanding an existing press setup, this full length die ensures your fired cases are resized to factory dimensions for reliable chambering and consistent performance. The FL sizing die handles the critical step of bringing your brass back to spec after firing.
This die includes a built-in decapping rod assembly that removes spent primers as part of the resizing stroke, streamlining your prep work. A neck expander button is integrated into the die itself, so it sizes the case neck down and simultaneously expands it to the correct inside diameter for bullet seating—a one-step operation that saves time and maintains case concentricity.
Redding dies are known for precision tolerances and consistent performance across thousands of loading cycles. Whether you're loading for precision target work, hunting, or high-volume practice, this full length sizing die is built to last and deliver the accuracy your 22 ARC loads demand. Note that a shellholder is required separately for use in your press—make sure you grab the appropriate shellholder (Redding #12) if you don't already have one.
| Cartridge | 22 ARC |
| Die Type | Full Length Sizing Die |
| Included Components | Die body, decapping rod assembly, neck expander button |
| Shellholder | Not included (Redding #12 required) |
A full length sizing die resizes the entire fired case back to factory dimensions. This includes the case body, shoulder, and neck, ensuring that once-fired brass will chamber reliably in your rifle and maintaining consistency shot to shot.
Yes. The integrated decapping rod assembly removes the spent primer as the case is pushed into the die during the resizing stroke, eliminating the need for a separate decapping step.
Yes. The shellholder is not included with this die. You'll need Redding shellholder #12 to use this die in a standard reloading press.
No. This die is sized specifically for the 22 ARC cartridge and should only be used with 22 ARC brass.
SKU: 167522140 • Width: 2.75in • Height: 1.75in • Depth: 6in • Weight: 0.59oz