The Rearden Blyat muzzle brake with 26x1.5 left-hand threads is a precision face-mount solution engineered to solve common alignment challenges on modern rifle platforms—especially AK-pattern builds. This brake attaches directly to Rearden's Atlas and Atlas XL suppressor adapters, making it a versatile interface for most commercially available suppressors on the market. The 1 1/16" wrench flats on the rear accept standard crow's-foot wrenches or Rearden's dedicated Atlas Wrench for installation, putting you in control of the setup process.

Built with a durable black nitride finish, the Blyat is designed to handle the rigors of field use while maintaining the tight, consistent seal critical to suppressor performance. The face-mount design on 26mm threads addresses alignment issues that plague many shooters working with non-standard platform geometries. Shims are included to dial in perfect muzzle alignment before final installation, and the brake accepts Rearden's Plan B adapters for maximum compatibility flexibility.

Installation demands precision: clean all surfaces thoroughly, dry-fit with and without shims to verify alignment using an alignment rod, then torque to approximately 30 ft-lbs once you're satisfied with indexing. When mating your suppressor, torque to 10 ft-lbs and verify alignment one final time. The nitride finish does produce a tighter interface, making proper installation and rockset to the barrel non-negotiable. If suppressor integration is new territory, a qualified gunsmith ensures your system performs safely and as designed.

The Rearden Blyat muzzle brake with 26x1.5 left-hand threads is a precision face-mount solution engineered to solve common alignment challenges on modern rifle platforms—especially AK-pattern builds. This brake attaches directly to Rearden's Atlas and Atlas XL suppressor adapters, making it a versatile interface for most commercially available suppressors on the market. The 1 1/16" wrench flats on the rear accept standard crow's-foot wrenches or Rearden's dedicated Atlas Wrench for installation, putting you in control of the setup process.

Built with a durable black nitride finish, the Blyat is designed to handle the rigors of field use while maintaining the tight, consistent seal critical to suppressor performance. The face-mount design on 26mm threads addresses alignment issues that plague many shooters working with non-standard platform geometries. Shims are included to dial in perfect muzzle alignment before final installation, and the brake accepts Rearden's Plan B adapters for maximum compatibility flexibility.

Installation demands precision: clean all surfaces thoroughly, dry-fit with and without shims to verify alignment using an alignment rod, then torque to approximately 30 ft-lbs once you're satisfied with indexing. When mating your suppressor, torque to 10 ft-lbs and verify alignment one final time. The nitride finish does produce a tighter interface, making proper installation and rockset to the barrel non-negotiable. If suppressor integration is new territory, a qualified gunsmith ensures your system performs safely and as designed.