Real Avid152742781
Real Avid Limiter 65 Inch Lbsreal Smart-Torq Fixed$29.99
Availability: In Stock
The Real Avid Smart-Torq Fixed 20 in-lb torque limiter is a precision gunsmithing tool built to prevent the most common assembly mistake: over-torquing scope rings, mounts, and action screws. Whether you're mounting an optic, adjusting a suppressor, or working on receiver components, this fixed-torque wrench takes the guesswork out of fastener tension. At 20 in-lb, it's calibrated for tasks that demand consistency—too loose risks zero shift or component migration; too tight risks stripped threads and broken fasteners. The "click style" overload clutch delivers tactile feedback when you hit the limit, then disengages safely so you can't accidentally exceed spec.
Real Avid engineered this tool with a compact design that integrates seamlessly with standard 1/4" hex drivers and bits, so you're not buying a whole system—just a smart limiter that fits into your existing toolkit. The fixed 20 in-lb setting eliminates calibration drift, meaning it delivers repeatable accuracy within ±5% across thousands of cycles. That consistency matters: a properly torqued scope ring stays zeroed; a careless one doesn't.
This is the kind of tool that separates careful builders from lucky ones. Scope mounting, suppressor installation, rail attachment, handguard fasteners—anywhere precision torque prevents stripped threads, loosened components, or optical shift. If you're doing your own gunsmithing or rifle assembly, a torque limiter isn't optional; it's insurance against expensive mistakes.
| Torque Setting | 20 in-lb (fixed) |
| Accuracy | ±5% |
| Drive Size | 1/4" hex |
| Clutch Type | Click-style overload |
| Brand | Real Avid |
This torque limiter is ideal for scope rings, optical mounts, suppressor fasteners, and receiver action screws—any precision assembly where over-torquing risks stripped threads or component damage.
The click-style overload clutch provides tactile feedback—you'll feel and hear a distinct click when you reach 20 in-lb, then the clutch disengages to prevent further tightening.
The Real Avid Smart-Torq is compatible with standard 1/4" hex drivers and bits, so you can use it with your existing gunsmithing bits and hex key sets.
No. The fixed 20 in-lb setting is pre-calibrated and requires no adjustment. It maintains ±5% accuracy across repeated use, eliminating calibration drift.
SKU: 152744815
Availability: In Stock
The Real Avid Smart-Torq Fixed 20 in-lb torque limiter is a precision gunsmithing tool built to prevent the most common assembly mistake: over-torquing scope rings, mounts, and action screws. Whether you're mounting an optic, adjusting a suppressor, or working on receiver components, this fixed-torque wrench takes the guesswork out of fastener tension. At 20 in-lb, it's calibrated for tasks that demand consistency—too loose risks zero shift or component migration; too tight risks stripped threads and broken fasteners. The "click style" overload clutch delivers tactile feedback when you hit the limit, then disengages safely so you can't accidentally exceed spec.
Real Avid engineered this tool with a compact design that integrates seamlessly with standard 1/4" hex drivers and bits, so you're not buying a whole system—just a smart limiter that fits into your existing toolkit. The fixed 20 in-lb setting eliminates calibration drift, meaning it delivers repeatable accuracy within ±5% across thousands of cycles. That consistency matters: a properly torqued scope ring stays zeroed; a careless one doesn't.
This is the kind of tool that separates careful builders from lucky ones. Scope mounting, suppressor installation, rail attachment, handguard fasteners—anywhere precision torque prevents stripped threads, loosened components, or optical shift. If you're doing your own gunsmithing or rifle assembly, a torque limiter isn't optional; it's insurance against expensive mistakes.
| Torque Setting | 20 in-lb (fixed) |
| Accuracy | ±5% |
| Drive Size | 1/4" hex |
| Clutch Type | Click-style overload |
| Brand | Real Avid |
This torque limiter is ideal for scope rings, optical mounts, suppressor fasteners, and receiver action screws—any precision assembly where over-torquing risks stripped threads or component damage.
The click-style overload clutch provides tactile feedback—you'll feel and hear a distinct click when you reach 20 in-lb, then the clutch disengages to prevent further tightening.
The Real Avid Smart-Torq is compatible with standard 1/4" hex drivers and bits, so you can use it with your existing gunsmithing bits and hex key sets.
No. The fixed 20 in-lb setting is pre-calibrated and requires no adjustment. It maintains ±5% accuracy across repeated use, eliminating calibration drift.
SKU: 152744815