RCBS167522166
Rcbs X Die Full Length Set .308 Win$69.84
Availability: In Stock
The RCBS X Die Full Length Set for .270 Winchester gives reloaders a precision die system built around a mandrel-based neck-sizing approach. If you're already trimming cases and looking to cut down on repeat trimming work and inconsistent case growth, this die set targets those pain points with a design that manages case mouth contact during sizing and keeps neck-wall thickness uniform.
The X Die's mandrel system works during the sizing stroke to contact the case mouth, which reduces how much your cases grow back after firing. Because the mandrel maintains a close tolerance with the neck walls, you avoid the thickening that happens with conventional sizing—meaning fewer cases that need re-trimming after the first 0.02-inch trim. For handloaders working up loads for hunting rifles or precision shooting where consistency matters, that translates to less busywork and more uniform brass from reload cycle to reload cycle.
This is a full-length die set, so it handles the complete sizing operation. It's designed specifically for .270 Winchester, so make sure your caliber matches before ordering. If you're running high-volume reloads or just tired of chasing case trim every couple of firings, the X Die approach offers a real workflow advantage.
| Caliber | .270 Winchester |
| Type | Full Length Die Set |
| Brand | RCBS |
The X Die uses a mandrel that contacts the case mouth during sizing to control neck growth. This reduces the amount of case growth after firing and prevents neck-wall thickening, which means you trim cases less often than with conventional dies.
This is a standard full-length die set for .270 Winchester and will work with any reloading press that accepts standard die threads. If you have questions about fit with your specific press, check your press manual or contact us.
The facts provided confirm this is a full-length die set for .270 Winchester; for a complete list of components, please refer to RCBS's product documentation or contact our team.
The X Die reduces growth rate during sizing by controlling case mouth contact with the mandrel, but specific growth measurements depend on your brass type and reloading process. Testing your own brass over a few reload cycles will show you the difference.
SKU: 167523071 • Width: 4.45in • Height: 1.75in • Depth: 5.95in • Weight: 1.35oz
Availability: In Stock
The RCBS X Die Full Length Set for .270 Winchester gives reloaders a precision die system built around a mandrel-based neck-sizing approach. If you're already trimming cases and looking to cut down on repeat trimming work and inconsistent case growth, this die set targets those pain points with a design that manages case mouth contact during sizing and keeps neck-wall thickness uniform.
The X Die's mandrel system works during the sizing stroke to contact the case mouth, which reduces how much your cases grow back after firing. Because the mandrel maintains a close tolerance with the neck walls, you avoid the thickening that happens with conventional sizing—meaning fewer cases that need re-trimming after the first 0.02-inch trim. For handloaders working up loads for hunting rifles or precision shooting where consistency matters, that translates to less busywork and more uniform brass from reload cycle to reload cycle.
This is a full-length die set, so it handles the complete sizing operation. It's designed specifically for .270 Winchester, so make sure your caliber matches before ordering. If you're running high-volume reloads or just tired of chasing case trim every couple of firings, the X Die approach offers a real workflow advantage.
| Caliber | .270 Winchester |
| Type | Full Length Die Set |
| Brand | RCBS |
The X Die uses a mandrel that contacts the case mouth during sizing to control neck growth. This reduces the amount of case growth after firing and prevents neck-wall thickening, which means you trim cases less often than with conventional dies.
This is a standard full-length die set for .270 Winchester and will work with any reloading press that accepts standard die threads. If you have questions about fit with your specific press, check your press manual or contact us.
The facts provided confirm this is a full-length die set for .270 Winchester; for a complete list of components, please refer to RCBS's product documentation or contact our team.
The X Die reduces growth rate during sizing by controlling case mouth contact with the mandrel, but specific growth measurements depend on your brass type and reloading process. Testing your own brass over a few reload cycles will show you the difference.
SKU: 167523071 • Width: 4.45in • Height: 1.75in • Depth: 5.95in • Weight: 1.35oz