$455.66
Availability: In Stock
The RCBS Vibratory Case Polisher is a 120 VAC brass cleaning machine built to restore fired cases to a uniform, press-ready shine. If you reload rifle or pistol ammunition, you know that starting with clean brass matters—it protects your dies, ensures consistent powder drops, and gives you confidence in your finished rounds. This vibratory tumbler handles the tedious work so you can spend your bench time on what counts.
The bowl holds up to 1.5 gallons of brass and polishing media combined (14 lbs. total capacity), and the intense vibrating action works fast—most users see visibly cleaner cases in minutes rather than hours. Capacity depends on case size: you can tumble up to 110 cases of 9mm or roughly 75 rounds of .223 in a single run. The sealed ball-bearing motor is fan-cooled for durability, keeping the unit running quietly over the long haul without sacrificing cleaning power. It's designed for the reloader who wants results without fuss.
Setup is straightforward. Fill the bowl with brass and media (walnut or corncob media is standard; you'll source that separately), flip the switch, and walk away. When the cycle is done, the included sifting lid lets you separate clean cases from media without the mess—no more fishing brass out of a pile or losing pieces through screens.
This is the 120V version, suitable for North American shops and reloading rooms. If your bench runs on 240V, RCBS offers that option as well. For anyone serious about reloading—whether you're working up match rounds, hunting loads, or defensive ammo—clean cases are the foundation. The RCBS Vibratory Case Polisher gets you there.
| Voltage | 120 VAC |
| Bowl Capacity | 1.5 gallons (6.0 liters) |
| Maximum Load | 14 lbs. (brass + media combined) |
| Case Capacity (approx.) | Up to 110 rounds (9mm); ~75 rounds (.223) |
| Motor Type | Sealed ball-bearing, fan-cooled |
| Included Accessories | Sifting lid |
| Media | Sold separately |
The polisher works with any fired brass you reload—pistol calibers like 9mm, .45 ACP, and .38 Special, as well as rifle rounds like .223, .308, and magnum calibers. Capacity varies by case size; the 1.5-gallon bowl holds up to 110 rounds of 9mm or approximately 75 rounds of .223 per batch.
Yes, polishing media (walnut or corncob) is sold separately. The vibratory bowl and motor are included; you supply the cleaning media of your choice.
Most reloaders see visibly clean, shiny cases in just a few minutes, though exact time depends on how dirty the brass is and your choice of media.
Yes. The included sifting lid makes separating your clean brass from media quick and easy—no more tedious hand sorting.
SKU: 115661444 • Weight: 6.73oz
Availability: In Stock
The RCBS Vibratory Case Polisher is a 120 VAC brass cleaning machine built to restore fired cases to a uniform, press-ready shine. If you reload rifle or pistol ammunition, you know that starting with clean brass matters—it protects your dies, ensures consistent powder drops, and gives you confidence in your finished rounds. This vibratory tumbler handles the tedious work so you can spend your bench time on what counts.
The bowl holds up to 1.5 gallons of brass and polishing media combined (14 lbs. total capacity), and the intense vibrating action works fast—most users see visibly cleaner cases in minutes rather than hours. Capacity depends on case size: you can tumble up to 110 cases of 9mm or roughly 75 rounds of .223 in a single run. The sealed ball-bearing motor is fan-cooled for durability, keeping the unit running quietly over the long haul without sacrificing cleaning power. It's designed for the reloader who wants results without fuss.
Setup is straightforward. Fill the bowl with brass and media (walnut or corncob media is standard; you'll source that separately), flip the switch, and walk away. When the cycle is done, the included sifting lid lets you separate clean cases from media without the mess—no more fishing brass out of a pile or losing pieces through screens.
This is the 120V version, suitable for North American shops and reloading rooms. If your bench runs on 240V, RCBS offers that option as well. For anyone serious about reloading—whether you're working up match rounds, hunting loads, or defensive ammo—clean cases are the foundation. The RCBS Vibratory Case Polisher gets you there.
| Voltage | 120 VAC |
| Bowl Capacity | 1.5 gallons (6.0 liters) |
| Maximum Load | 14 lbs. (brass + media combined) |
| Case Capacity (approx.) | Up to 110 rounds (9mm); ~75 rounds (.223) |
| Motor Type | Sealed ball-bearing, fan-cooled |
| Included Accessories | Sifting lid |
| Media | Sold separately |
The polisher works with any fired brass you reload—pistol calibers like 9mm, .45 ACP, and .38 Special, as well as rifle rounds like .223, .308, and magnum calibers. Capacity varies by case size; the 1.5-gallon bowl holds up to 110 rounds of 9mm or approximately 75 rounds of .223 per batch.
Yes, polishing media (walnut or corncob) is sold separately. The vibratory bowl and motor are included; you supply the cleaning media of your choice.
Most reloaders see visibly clean, shiny cases in just a few minutes, though exact time depends on how dirty the brass is and your choice of media.
Yes. The included sifting lid makes separating your clean brass from media quick and easy—no more tedious hand sorting.
SKU: 115661444 • Weight: 6.73oz
