$160.35
Loading...
Loading...
Loading...
Availability: In Stock
The RCBS Matchmaster Bushing Die Set for .30-06 Springfield neck sizing brings precision reloading techniques used by benchrest and long-range competitors into your own shop. If you're serious about ammunition consistency and case longevity, neck-sizing dies with interchangeable bushings let you control bullet tension with far greater precision than full-length sizing. This two-die set includes the neck sizing die and bullet seating die—everything you need to reload accurate, repeatable rounds while minimizing brass work and extending case life.
The Matchmaster neck sizing die uses swappable neck bushings (sold separately) to apply exactly the amount of tension you want on each bullet. That self-centering design has been the standard among precision shooters for decades because it works: less neck deformation means more reloads per case. The included titanium carbo-nitride expander reduces buildup and keeps extraction smooth, round after round.
Seating is where the Matchmaster really shines. The oversized micrometer adjustment knob—marked clearly with large letters and hash marks—dials in bullet seating depth to one-thousandth-inch repeatability. The exclusive loading window and internal sleeve design let you drop a bullet and run the press without balancing it on the case mouth or risking your fingers. The self-centering stem guides the bullet into perfect alignment for concentricity that shows on target. Deep-blued finish and hand-polished internals reflect the same attention to detail you'll see in the final ammunition.
Standard 7/8"-14 thread, compatible with most single-stage and turret presses. Case-hardened steel construction and precision reaming ensure years of consistent performance. Neck sizing isn't for everyone—full-length sizing has its place—but if tight groups and extended case life matter to you, this is the die set that delivers.
| Caliber | .30-06 Springfield |
| Die Type | Neck sizing and bullet seating set |
| Dies Included | Neck sizing die, bullet seating die |
| Bushing System | Interchangeable neck bushings (sold separately) |
| Expander | Titanium carbo-nitride |
| Seating Adjustment | Micrometer with 0.001" increments |
| Seating Stem | Free-floating, self-centering |
| Thread | 7/8"-14 |
| Material | Case-hardened steel |
| Finish | Hand-polished internals, deep blued (seating die) |
Yes. The Matchmaster neck sizing die uses interchangeable bushings to control neck tension, and they are sold separately. This lets you tune tension for different bullet brands or weights without buying new dies.
Neck sizing resizes only the neck of the case, leaving the body untouched. This minimizes overall case working, extends case life, and is preferred by precision and long-range shooters. Full-length sizing resizes the entire case and is more common for hunting ammunition or cases fired in multiple firearms.
Yes, provided your press has a standard 7/8"-14 threaded die hole. This is the industry standard for most single-stage and turret presses.
The loading window on the seating die lets you drop a bullet into the case without balancing it on the case mouth. The internal sleeve catches and holds the bullet aligned with the case, then guides it during seating for concentric, accurate results.
SKU: 167524829 • Width: 4.5in • Height: 1.75in • Depth: 6in • Weight: 1.465oz
Availability: In Stock
The RCBS Matchmaster Bushing Die Set for .30-06 Springfield neck sizing brings precision reloading techniques used by benchrest and long-range competitors into your own shop. If you're serious about ammunition consistency and case longevity, neck-sizing dies with interchangeable bushings let you control bullet tension with far greater precision than full-length sizing. This two-die set includes the neck sizing die and bullet seating die—everything you need to reload accurate, repeatable rounds while minimizing brass work and extending case life.
The Matchmaster neck sizing die uses swappable neck bushings (sold separately) to apply exactly the amount of tension you want on each bullet. That self-centering design has been the standard among precision shooters for decades because it works: less neck deformation means more reloads per case. The included titanium carbo-nitride expander reduces buildup and keeps extraction smooth, round after round.
Seating is where the Matchmaster really shines. The oversized micrometer adjustment knob—marked clearly with large letters and hash marks—dials in bullet seating depth to one-thousandth-inch repeatability. The exclusive loading window and internal sleeve design let you drop a bullet and run the press without balancing it on the case mouth or risking your fingers. The self-centering stem guides the bullet into perfect alignment for concentricity that shows on target. Deep-blued finish and hand-polished internals reflect the same attention to detail you'll see in the final ammunition.
Standard 7/8"-14 thread, compatible with most single-stage and turret presses. Case-hardened steel construction and precision reaming ensure years of consistent performance. Neck sizing isn't for everyone—full-length sizing has its place—but if tight groups and extended case life matter to you, this is the die set that delivers.
| Caliber | .30-06 Springfield |
| Die Type | Neck sizing and bullet seating set |
| Dies Included | Neck sizing die, bullet seating die |
| Bushing System | Interchangeable neck bushings (sold separately) |
| Expander | Titanium carbo-nitride |
| Seating Adjustment | Micrometer with 0.001" increments |
| Seating Stem | Free-floating, self-centering |
| Thread | 7/8"-14 |
| Material | Case-hardened steel |
| Finish | Hand-polished internals, deep blued (seating die) |
Yes. The Matchmaster neck sizing die uses interchangeable bushings to control neck tension, and they are sold separately. This lets you tune tension for different bullet brands or weights without buying new dies.
Neck sizing resizes only the neck of the case, leaving the body untouched. This minimizes overall case working, extends case life, and is preferred by precision and long-range shooters. Full-length sizing resizes the entire case and is more common for hunting ammunition or cases fired in multiple firearms.
Yes, provided your press has a standard 7/8"-14 threaded die hole. This is the industry standard for most single-stage and turret presses.
The loading window on the seating die lets you drop a bullet into the case without balancing it on the case mouth. The internal sleeve catches and holds the bullet aligned with the case, then guides it during seating for concentric, accurate results.
SKU: 167524829 • Width: 4.5in • Height: 1.75in • Depth: 6in • Weight: 1.465oz
