$97.11
Availability: In Stock
The RCBS Full Length Die Set for 6.5x54 Mannlicher is a two-die reloading system built to handle the precise demands of this classic European bottleneck cartridge. Whether you're working up loads for a vintage Mannlicher rifle or a modern build chambered in this caliber, this die set brings your fired cases back to SAAMI minimum dimensions and readies them for a fresh bullet and powder charge. RCBS's reputation for precision tooling shows in every detail—from the engineering of the full-length sizer to the integrated seating mechanics.
The full-length sizer die does the heavy lifting: it sizes the case body, removes the spent primer via the integrated decapping unit, and expands the neck to accept your next bullet. The die features internal vents to protect your cases from air-lock damage and excessive lubricant pooling—a small but important detail that keeps brass in good shape over many reloading cycles. Headspace is held to tight tolerances during sizing, so you won't see unwanted changes in case length that can affect consistency.
The seating die completes the pair with a built-in roll crimper, meaning you seat the bullet and apply the crimp in one smooth operation. This integrated approach simplifies your press setup and helps maintain consistent bullet seating depth across your entire batch. For handloaders who value repeatability and durability in their die sets, RCBS Group D dies are a trusted choice.
| Product Type | 2-Die Full Length Reloading Set |
| Cartridge | 6.5x54 Mannlicher |
| Includes | Full-Length Sizer Die, Seater Die |
| Sizer Type | Full-Length with Expander-Decapping Unit |
| Seater Features | Integrated Roll Crimper |
| Manufacturer | RCBS |
You get two dies: a full-length sizer die with an integrated decapping unit and expander, and a seating die with a built-in roll crimper. This is a complete two-die system for processing fired 6.5x54 Mannlicher brass.
Yes. The sizer die brings cases to SAAMI minimum dimensions, resizing the case body, removing the spent primer, and expanding the neck in one operation.
No. These dies are specific to the 6.5x54 Mannlicher cartridge. Always use dies matched to your cartridge.
The internal vents prevent trapped air and excess lubricant from damaging your brass during the sizing stroke. It's a design feature that extends case life and improves reloading consistency.
SKU: 167523057 • Width: 4.45in • Height: 1.75in • Depth: 5.95in • Weight: 1.2375oz
Availability: In Stock
The RCBS Full Length Die Set for 6.5x54 Mannlicher is a two-die reloading system built to handle the precise demands of this classic European bottleneck cartridge. Whether you're working up loads for a vintage Mannlicher rifle or a modern build chambered in this caliber, this die set brings your fired cases back to SAAMI minimum dimensions and readies them for a fresh bullet and powder charge. RCBS's reputation for precision tooling shows in every detail—from the engineering of the full-length sizer to the integrated seating mechanics.
The full-length sizer die does the heavy lifting: it sizes the case body, removes the spent primer via the integrated decapping unit, and expands the neck to accept your next bullet. The die features internal vents to protect your cases from air-lock damage and excessive lubricant pooling—a small but important detail that keeps brass in good shape over many reloading cycles. Headspace is held to tight tolerances during sizing, so you won't see unwanted changes in case length that can affect consistency.
The seating die completes the pair with a built-in roll crimper, meaning you seat the bullet and apply the crimp in one smooth operation. This integrated approach simplifies your press setup and helps maintain consistent bullet seating depth across your entire batch. For handloaders who value repeatability and durability in their die sets, RCBS Group D dies are a trusted choice.
| Product Type | 2-Die Full Length Reloading Set |
| Cartridge | 6.5x54 Mannlicher |
| Includes | Full-Length Sizer Die, Seater Die |
| Sizer Type | Full-Length with Expander-Decapping Unit |
| Seater Features | Integrated Roll Crimper |
| Manufacturer | RCBS |
You get two dies: a full-length sizer die with an integrated decapping unit and expander, and a seating die with a built-in roll crimper. This is a complete two-die system for processing fired 6.5x54 Mannlicher brass.
Yes. The sizer die brings cases to SAAMI minimum dimensions, resizing the case body, removing the spent primer, and expanding the neck in one operation.
No. These dies are specific to the 6.5x54 Mannlicher cartridge. Always use dies matched to your cartridge.
The internal vents prevent trapped air and excess lubricant from damaging your brass during the sizing stroke. It's a design feature that extends case life and improves reloading consistency.
SKU: 167523057 • Width: 4.45in • Height: 1.75in • Depth: 5.95in • Weight: 1.2375oz