$98.11
Availability: In Stock
The RCBS Full Length Die Set for 5.6x50 Rimmed bottleneck rifle cartridges is a two-die reloading system built to bring your brass to SAAMI minimum specifications. Whether you're setting up for precision rifle reloading or maintaining consistent ammunition for a specialized cartridge, this set handles the core steps—sizing and seating—with the engineering RCBS is known for in the reloading community.
The Full-Length Sizer Die in this set performs three critical tasks: it sizes the case body and neck back to factory dimensions, deprime spent primers, and expand the neck to accept a fresh bullet. The die incorporates vents to prevent case damage from trapped air and excess lubricant—details that protect your brass through repeated reloading cycles. Because headspace is held to minimum tolerances, you avoid unwanted case lengthening that can occur with improper full-length sizing.
The Seater Die completes the reloading sequence by seating the bullet to your specified depth while simultaneously applying a roll crimp. This integrated crimping action locks the bullet in place and helps maintain consistent shot-to-shot performance. Together, these two dies form the foundation of a repeatable reloading process for the 5.6x50 Rimmed cartridge.
| Brand | RCBS |
| Product Type | Full Length Rifle Die Set |
| Cartridge | 5.6x50 Rimmed |
| Die Count | 2 |
| Cartridge Type | Bottleneck |
A full-length die set resizes fired brass to factory dimensions, deprime the old primer, and seat a new bullet. This RCBS set brings cases to SAAMI minimum specifications, ensuring consistent cartridge dimensions for reliable feeding and chamber fit.
No. This die set is specifically designed for 5.6x50 Rimmed bottleneck rifle cartridges. Using dies outside their intended cartridge risks unsafe pressures, poor accuracy, and equipment damage.
No. This is a two-die reloading set only. You'll need to source 5.6x50 Rimmed brass, primers, bullets, and powder separately to complete your ammunition.
The vents in the sizer die prevent air and excess lubricant from becoming trapped inside the die. This protects your brass cases from damage during the sizing stroke.
SKU: 167526269 • Width: 4.5in • Height: 1.75in • Depth: 5.9in • Weight: 1.2313oz
Availability: In Stock
The RCBS Full Length Die Set for 5.6x50 Rimmed bottleneck rifle cartridges is a two-die reloading system built to bring your brass to SAAMI minimum specifications. Whether you're setting up for precision rifle reloading or maintaining consistent ammunition for a specialized cartridge, this set handles the core steps—sizing and seating—with the engineering RCBS is known for in the reloading community.
The Full-Length Sizer Die in this set performs three critical tasks: it sizes the case body and neck back to factory dimensions, deprime spent primers, and expand the neck to accept a fresh bullet. The die incorporates vents to prevent case damage from trapped air and excess lubricant—details that protect your brass through repeated reloading cycles. Because headspace is held to minimum tolerances, you avoid unwanted case lengthening that can occur with improper full-length sizing.
The Seater Die completes the reloading sequence by seating the bullet to your specified depth while simultaneously applying a roll crimp. This integrated crimping action locks the bullet in place and helps maintain consistent shot-to-shot performance. Together, these two dies form the foundation of a repeatable reloading process for the 5.6x50 Rimmed cartridge.
| Brand | RCBS |
| Product Type | Full Length Rifle Die Set |
| Cartridge | 5.6x50 Rimmed |
| Die Count | 2 |
| Cartridge Type | Bottleneck |
A full-length die set resizes fired brass to factory dimensions, deprime the old primer, and seat a new bullet. This RCBS set brings cases to SAAMI minimum specifications, ensuring consistent cartridge dimensions for reliable feeding and chamber fit.
No. This die set is specifically designed for 5.6x50 Rimmed bottleneck rifle cartridges. Using dies outside their intended cartridge risks unsafe pressures, poor accuracy, and equipment damage.
No. This is a two-die reloading set only. You'll need to source 5.6x50 Rimmed brass, primers, bullets, and powder separately to complete your ammunition.
The vents in the sizer die prevent air and excess lubricant from becoming trapped inside the die. This protects your brass cases from damage during the sizing stroke.
SKU: 167526269 • Width: 4.5in • Height: 1.75in • Depth: 5.9in • Weight: 1.2313oz