$107.49
Availability: In Stock
Cast your own .401" pistol bullets with the RCBS Flat Nose Pistol Bullet Mould in the 180-grain flat nose profile. This double-cavity mould is purpose-built for handloaders who want to produce consistent, quality projectiles for their reloading bench. Whether you're developing loads for competition, hunting, or range work, casting your own bullets gives you control over your ammunition and can reduce per-round costs significantly over time.
The mould is constructed from solid steel block with precision-machined cavities and steel alignment pins that keep both halves locked in perfect registration. The 3/16-inch solid steel sprue plate is held firmly in place by tempered steel spring washers and screws, ensuring no brass shavings or other debris enters your cavity during casting. The two-cavity design lets you produce two finished bullets per pour, speeding up your casting sessions compared to single-cavity moulds.
This is the bare mould only—handles are sold separately—so if you already have handles on hand from another mould, you're ready to go. If you're new to casting or need a fresh set, RCBS handles are available as an add-on purchase. Designed to work with standard reloading presses and casting equipment, this mould is a reliable choice for any handloader serious about ammunition production.
| Bullet Diameter | .401" |
| Bullet Weight | 180 grains |
| Bullet Profile | Flat Nose |
| Cavity Count | Double (2) |
| Construction | Solid Steel Block |
| Sprue Plate | 3/16" Solid Steel |
| Handles Included | No (sold separately) |
No, handles are not included with this mould. They are sold separately and can be purchased if needed. If you already own RCBS handles from another mould, you can reuse them with this one.
This mould casts .401" diameter bullets at 180 grains. The flat nose profile makes it suitable for pistol reloading applications that call for this size and weight.
Yes, this is a standard two-cavity mould designed to work with conventional bullet casting equipment and presses. Confirm that your setup is compatible with the mould style and cavity diameter before ordering.
The double-cavity design produces two finished bullets with each pour, allowing you to work faster than a single-cavity mould would.
SKU: 167523979 • Width: 2.2in • Height: 2.1in • Depth: 3.6in • Weight: 0.9688oz
Availability: In Stock
Cast your own .401" pistol bullets with the RCBS Flat Nose Pistol Bullet Mould in the 180-grain flat nose profile. This double-cavity mould is purpose-built for handloaders who want to produce consistent, quality projectiles for their reloading bench. Whether you're developing loads for competition, hunting, or range work, casting your own bullets gives you control over your ammunition and can reduce per-round costs significantly over time.
The mould is constructed from solid steel block with precision-machined cavities and steel alignment pins that keep both halves locked in perfect registration. The 3/16-inch solid steel sprue plate is held firmly in place by tempered steel spring washers and screws, ensuring no brass shavings or other debris enters your cavity during casting. The two-cavity design lets you produce two finished bullets per pour, speeding up your casting sessions compared to single-cavity moulds.
This is the bare mould only—handles are sold separately—so if you already have handles on hand from another mould, you're ready to go. If you're new to casting or need a fresh set, RCBS handles are available as an add-on purchase. Designed to work with standard reloading presses and casting equipment, this mould is a reliable choice for any handloader serious about ammunition production.
| Bullet Diameter | .401" |
| Bullet Weight | 180 grains |
| Bullet Profile | Flat Nose |
| Cavity Count | Double (2) |
| Construction | Solid Steel Block |
| Sprue Plate | 3/16" Solid Steel |
| Handles Included | No (sold separately) |
No, handles are not included with this mould. They are sold separately and can be purchased if needed. If you already own RCBS handles from another mould, you can reuse them with this one.
This mould casts .401" diameter bullets at 180 grains. The flat nose profile makes it suitable for pistol reloading applications that call for this size and weight.
Yes, this is a standard two-cavity mould designed to work with conventional bullet casting equipment and presses. Confirm that your setup is compatible with the mould style and cavity diameter before ordering.
The double-cavity design produces two finished bullets with each pour, allowing you to work faster than a single-cavity mould would.
SKU: 167523979 • Width: 2.2in • Height: 2.1in • Depth: 3.6in • Weight: 0.9688oz