RCBS115757606
RCBS 375 Win Roll Crimp Reloading Dies Set$79.94
Availability: In Stock
If you're loading .480 Ruger, you need a reloading die set built for that straight-wall cartridge—and the RCBS 480 Ruger Roll Crimp Reloading Dies Set gives you the three-die setup to do it right. This set handles the full handloading sequence: sizing and de-priming, case expansion and mouth flare, and bullet seating with a roll crimp. Whether you're working up hunting loads or match rounds for your revolver, a quality die set is the foundation of consistent, reliable ammunition.
Straight-wall cartridges like .480 Ruger demand dies that understand the geometry—expanding the case mouth properly for bullet insertion and then securing the round with a crimp that holds under recoil. This set does both. The included Sizer Die handles the heavy lifting, reducing fired brass to spec and removing the spent primer in one stroke (note: you'll want to use case lube to protect your press and brass). The Expander Die then opens the case mouth to the right diameter and creates the flare needed for smooth bullet feeding. Finally, the Seater Die seats your bullet to depth and applies the roll crimp that keeps it there.
Built from steel and engineered for RCBS's reputation for precision, this die set integrates with your existing reloading press and will serve you through hundreds of rounds. If .480 Ruger is your caliber and you're ready to load your own, this is the working tool that makes it possible.
| Caliber | .480 Ruger |
| Type | 3-Die Roll Crimp Set |
| Manufacturer | RCBS |
| Material | Steel |
| Application | Straight-wall cartridge handloading |
Yes. Cases must be lubricated before sizing to protect both your brass and your press from excessive friction and wear.
The roll crimp, applied by the Seater Die, secures the bullet in the case and helps prevent bullet movement under the recoil forces typical of .480 Ruger handgun loads.
This die set is engineered to integrate with standard reloading presses, but compatibility depends on your specific press design. Check your press manual or contact RCBS if you have questions about fit.
The set includes the three dies (Sizer, Expander, and Seater) and is everything you need for the die stage of .480 Ruger reloading. You will need a reloading press, brass, primers, powder, and bullets to complete the process.
SKU: 115674660 • Weight: 1.18oz
Availability: In Stock
If you're loading .480 Ruger, you need a reloading die set built for that straight-wall cartridge—and the RCBS 480 Ruger Roll Crimp Reloading Dies Set gives you the three-die setup to do it right. This set handles the full handloading sequence: sizing and de-priming, case expansion and mouth flare, and bullet seating with a roll crimp. Whether you're working up hunting loads or match rounds for your revolver, a quality die set is the foundation of consistent, reliable ammunition.
Straight-wall cartridges like .480 Ruger demand dies that understand the geometry—expanding the case mouth properly for bullet insertion and then securing the round with a crimp that holds under recoil. This set does both. The included Sizer Die handles the heavy lifting, reducing fired brass to spec and removing the spent primer in one stroke (note: you'll want to use case lube to protect your press and brass). The Expander Die then opens the case mouth to the right diameter and creates the flare needed for smooth bullet feeding. Finally, the Seater Die seats your bullet to depth and applies the roll crimp that keeps it there.
Built from steel and engineered for RCBS's reputation for precision, this die set integrates with your existing reloading press and will serve you through hundreds of rounds. If .480 Ruger is your caliber and you're ready to load your own, this is the working tool that makes it possible.
| Caliber | .480 Ruger |
| Type | 3-Die Roll Crimp Set |
| Manufacturer | RCBS |
| Material | Steel |
| Application | Straight-wall cartridge handloading |
Yes. Cases must be lubricated before sizing to protect both your brass and your press from excessive friction and wear.
The roll crimp, applied by the Seater Die, secures the bullet in the case and helps prevent bullet movement under the recoil forces typical of .480 Ruger handgun loads.
This die set is engineered to integrate with standard reloading presses, but compatibility depends on your specific press design. Check your press manual or contact RCBS if you have questions about fit.
The set includes the three dies (Sizer, Expander, and Seater) and is everything you need for the die stage of .480 Ruger reloading. You will need a reloading press, brass, primers, powder, and bullets to complete the process.
SKU: 115674660 • Weight: 1.18oz