R
RCBS115860601
RCBS 87075 Multi-Caliber Case Media Sifter - Black$17.65
Availability: In Stock
The RCBS 87076 Rotary Case/Media Separator is a practical, time-saving tool for reloaders who tumble-clean brass in bulk. After your cases have run through a vibratory or rotary case cleaner, dumping them straight into a media separator beats hand-sorting through wet walnut or corncob media by hours. Spin the handle a few times, and gravity does the work — cleaned cases stay on top while media falls to the bottom, leaving you with ready-to-reload brass and minimal dust escaping into your shop.
Built from heavy-duty plastic, this multi-caliber separator handles batches across the common rifle and pistol spectrum. It'll take 180 .30-06 cases at once, or up to 400 .38 Special cases, so you can process a full cleaning run without breaking it into multiple loads. The design traps fine media dust inside the basket rather than venting it across your reloading bench—a small detail that keeps your workspace cleaner and your lungs happier.
If you're running a small to mid-volume reloading operation, this separator cuts your case-prep time significantly. It's not fancy, but it works. Drop the load in, turn the handle, and move on to the next step. For reloaders who process cases in quantity rather than one-and-done batches, it's a worthwhile addition to the prep station.
| Manufacturer | RCBS |
| Model | 87076 |
| Type | Rotary Case/Media Separator |
| Capacity (.30-06) | 180 cases |
| Capacity (.38 Special) | 400 cases |
| Material | Heavy-duty plastic |
| Category | Case Preparation / Case Cleaning |
The separator holds up to 180 .30-06 cases or 400 .38 Special cases along with cleaning media. Actual capacity may vary depending on case size and media type, but these figures represent standard loads.
Yes. The multi-caliber design accommodates both rifle and pistol cases. The stated capacities (.30-06 and .38 Special) are reference points; you can adjust batch size based on your specific calibers.
The enclosed basket design contains fine media particles inside the separator as you turn the handle and gravity drops the media to the bottom. This keeps airborne dust from escaping into your reloading room.
The product description covers case and media separation; disposal or reuse of media is up to your preference. Many reloaders reuse walnut or corncob media until it breaks down, then replace it.
SKU: 115795542 • Width: 12.6in • Height: 12.3in • Depth: 18.2in • Weight: 6.2oz
Availability: In Stock
The RCBS 87076 Rotary Case/Media Separator is a practical, time-saving tool for reloaders who tumble-clean brass in bulk. After your cases have run through a vibratory or rotary case cleaner, dumping them straight into a media separator beats hand-sorting through wet walnut or corncob media by hours. Spin the handle a few times, and gravity does the work — cleaned cases stay on top while media falls to the bottom, leaving you with ready-to-reload brass and minimal dust escaping into your shop.
Built from heavy-duty plastic, this multi-caliber separator handles batches across the common rifle and pistol spectrum. It'll take 180 .30-06 cases at once, or up to 400 .38 Special cases, so you can process a full cleaning run without breaking it into multiple loads. The design traps fine media dust inside the basket rather than venting it across your reloading bench—a small detail that keeps your workspace cleaner and your lungs happier.
If you're running a small to mid-volume reloading operation, this separator cuts your case-prep time significantly. It's not fancy, but it works. Drop the load in, turn the handle, and move on to the next step. For reloaders who process cases in quantity rather than one-and-done batches, it's a worthwhile addition to the prep station.
| Manufacturer | RCBS |
| Model | 87076 |
| Type | Rotary Case/Media Separator |
| Capacity (.30-06) | 180 cases |
| Capacity (.38 Special) | 400 cases |
| Material | Heavy-duty plastic |
| Category | Case Preparation / Case Cleaning |
The separator holds up to 180 .30-06 cases or 400 .38 Special cases along with cleaning media. Actual capacity may vary depending on case size and media type, but these figures represent standard loads.
Yes. The multi-caliber design accommodates both rifle and pistol cases. The stated capacities (.30-06 and .38 Special) are reference points; you can adjust batch size based on your specific calibers.
The enclosed basket design contains fine media particles inside the separator as you turn the handle and gravity drops the media to the bottom. This keeps airborne dust from escaping into your reloading room.
The product description covers case and media separation; disposal or reuse of media is up to your preference. Many reloaders reuse walnut or corncob media until it breaks down, then replace it.
SKU: 115795542 • Width: 12.6in • Height: 12.3in • Depth: 18.2in • Weight: 6.2oz