$52.10
Availability: In Stock
The RCBS 30701 Full-Length 2-Die Set Group A is purpose-built for reloading 35 Whelen bottleneck cases with the precision and consistency that handloaders expect from RCBS. This two-die set gives you everything needed to resize, deprime, and seat bullets for this classic medium-bore cartridge. If you're working up loads for a 35 Whelen hunting rifle or fine-tuning ammunition for the range, this die set handles the core operations that define reloading quality.
The Full-Length Sizer Die is where the process starts. It resizes your fired cases back to SAAMI minimum dimensions, ensuring consistent case geometry from shot to shot. The die's expander-decapping unit removes spent primers and opens the neck to accept a new bullet. Built-in vents prevent the air trapping and lubricant buildup that can damage cases during sizing, and the die is engineered to hold headspace to tight tolerances so you're not changing case body length in the process.
The included Seater Die handles the final step with a built-in roll crimper that secures the bullet and seats it in one motion. This integrated approach keeps runout minimal and gives you repeatable results across your entire batch. For 35 Whelen reloaders who demand consistency without the complexity, this die set delivers straightforward, reliable performance.
| Product Name | RCBS 30701 Full-Length 2-Die Set Group A |
| Caliber | 35 Whelen |
| Die Type | Two-Die Set (Sizer + Seater) |
| Sizer Function | Full-Length Sizer with Expander-Decapper |
| Seater Function | Bullet Seater with Roll Crimper |
You get two dies: a Full-Length Sizer Die with expander-decapping unit and a Seater Die with built-in bullet seater plug and roll crimper. These are the primary dies needed for the core reloading process on bottleneck cases like the 35 Whelen.
Yes, this set is engineered for 35 Whelen ammunition. The dies resize cases to SAAMI minimum specifications and seat bullets to proper depth and crimp for the cartridge.
Yes, the Full-Length Sizer Die includes vents to prevent air from becoming trapped during sizing and to allow excess lubricant to escape. This design detail protects your cases from damage that can occur when pressure builds inside the die.
No, these dies are caliber-specific for 35 Whelen. You will need a separate die set for any other cartridge.
SKU: 115808245 • Width: 4.5in • Height: 1.7in • Depth: 5.9in • Weight: 1.3oz
Availability: In Stock
The RCBS 30701 Full-Length 2-Die Set Group A is purpose-built for reloading 35 Whelen bottleneck cases with the precision and consistency that handloaders expect from RCBS. This two-die set gives you everything needed to resize, deprime, and seat bullets for this classic medium-bore cartridge. If you're working up loads for a 35 Whelen hunting rifle or fine-tuning ammunition for the range, this die set handles the core operations that define reloading quality.
The Full-Length Sizer Die is where the process starts. It resizes your fired cases back to SAAMI minimum dimensions, ensuring consistent case geometry from shot to shot. The die's expander-decapping unit removes spent primers and opens the neck to accept a new bullet. Built-in vents prevent the air trapping and lubricant buildup that can damage cases during sizing, and the die is engineered to hold headspace to tight tolerances so you're not changing case body length in the process.
The included Seater Die handles the final step with a built-in roll crimper that secures the bullet and seats it in one motion. This integrated approach keeps runout minimal and gives you repeatable results across your entire batch. For 35 Whelen reloaders who demand consistency without the complexity, this die set delivers straightforward, reliable performance.
| Product Name | RCBS 30701 Full-Length 2-Die Set Group A |
| Caliber | 35 Whelen |
| Die Type | Two-Die Set (Sizer + Seater) |
| Sizer Function | Full-Length Sizer with Expander-Decapper |
| Seater Function | Bullet Seater with Roll Crimper |
You get two dies: a Full-Length Sizer Die with expander-decapping unit and a Seater Die with built-in bullet seater plug and roll crimper. These are the primary dies needed for the core reloading process on bottleneck cases like the 35 Whelen.
Yes, this set is engineered for 35 Whelen ammunition. The dies resize cases to SAAMI minimum specifications and seat bullets to proper depth and crimp for the cartridge.
Yes, the Full-Length Sizer Die includes vents to prevent air from becoming trapped during sizing and to allow excess lubricant to escape. This design detail protects your cases from damage that can occur when pressure builds inside the die.
No, these dies are caliber-specific for 35 Whelen. You will need a separate die set for any other cartridge.
SKU: 115808245 • Width: 4.5in • Height: 1.7in • Depth: 5.9in • Weight: 1.3oz