Feradyne Outdoors144599843
Rage R38901 Broadhead 2 Blade Chisel Tip NC (NO Collar) $49.99
Availability: In Stock
The Rage R38900 is a cut-on-contact broadhead built for bowhunters who demand a wide, reliable wound channel and dependable blade deployment on impact. This two-blade broadhead uses a no-collar design that strips away complexity, relying instead on a sharp .039" tip and stainless steel blade geometry to initiate cutting the instant the head meets flesh. With a 2" cutting diameter and .035" thick blades, the Rage 2 Blade generates the kind of hemorrhage-inducing trauma that translates to fast, ethical kills on deer and similar game.
The no-collar configuration means there's no spring-loaded retention collar to fail, foul, or slow blade opening. Once the broadhead hits, the blades respond immediately to the impact, expanding the wound channel without hesitation. The anodized aluminum ferrule provides structural integrity while keeping weight predictable, and the 100-grain total mass works with a wide range of arrow platforms and draw weights.
Rage's redesigned approach to this profile focuses on stripping away parts that don't serve penetration and cutting. If you've run collared broadheads and want something simpler and faster to deploy, or if you're chasing maximum cutting diameter in a lightweight package, the R38900 trades mechanical complexity for direct, dependable blade action.
| Brand | Feradyne Outdoors (Rage) |
| Model | R38900 |
| Type | Cut-on-Contact Broadhead |
| Blade Count | 2 |
| Cutting Diameter | 2" |
| Blade Thickness | .035" |
| Tip Design | .039" cut-on-contact point |
| Weight | 100 grains |
| Ferrule Material | Anodized aluminum |
| Collar | None (no-collar design) |
A no-collar broadhead has no spring or mechanical retention system holding the blades closed before impact. The Rage R38900 relies solely on the design of the blades and ferrule to keep them tucked until the .039" tip hits the target. Once impact occurs, the blades open to their full 2" cutting diameter. This simplifies the design and eliminates components that can wear or fail over time.
Cut-on-contact means the broadhead begins cutting the moment the tip touches the target, without requiring any delay or mechanical trigger. The sharp .039" point and blade geometry work together so the blades engage and cut immediately upon impact, rather than relying on a collar to release them after penetration has started.
Yes. The 100-grain weight, 2" cutting diameter, and stainless steel blade construction are designed for medium-game hunting applications like deer. Always verify that your draw weight, arrow setup, and local regulations support broadhead hunting in your area.
The 100-grain weight is compatible with standard broadhead-compatible arrows and most compound and recurve setups, but your specific arrow spine, draw weight, and platform will determine suitability. Consult the broadhead compatibility guidelines for your bow and arrow system before use.
SKU: 144599888 • Width: 6.1in • Height: 1.2in • Depth: 10.8in • Weight: 0.16oz
Availability: In Stock
The Rage R38900 is a cut-on-contact broadhead built for bowhunters who demand a wide, reliable wound channel and dependable blade deployment on impact. This two-blade broadhead uses a no-collar design that strips away complexity, relying instead on a sharp .039" tip and stainless steel blade geometry to initiate cutting the instant the head meets flesh. With a 2" cutting diameter and .035" thick blades, the Rage 2 Blade generates the kind of hemorrhage-inducing trauma that translates to fast, ethical kills on deer and similar game.
The no-collar configuration means there's no spring-loaded retention collar to fail, foul, or slow blade opening. Once the broadhead hits, the blades respond immediately to the impact, expanding the wound channel without hesitation. The anodized aluminum ferrule provides structural integrity while keeping weight predictable, and the 100-grain total mass works with a wide range of arrow platforms and draw weights.
Rage's redesigned approach to this profile focuses on stripping away parts that don't serve penetration and cutting. If you've run collared broadheads and want something simpler and faster to deploy, or if you're chasing maximum cutting diameter in a lightweight package, the R38900 trades mechanical complexity for direct, dependable blade action.
| Brand | Feradyne Outdoors (Rage) |
| Model | R38900 |
| Type | Cut-on-Contact Broadhead |
| Blade Count | 2 |
| Cutting Diameter | 2" |
| Blade Thickness | .035" |
| Tip Design | .039" cut-on-contact point |
| Weight | 100 grains |
| Ferrule Material | Anodized aluminum |
| Collar | None (no-collar design) |
A no-collar broadhead has no spring or mechanical retention system holding the blades closed before impact. The Rage R38900 relies solely on the design of the blades and ferrule to keep them tucked until the .039" tip hits the target. Once impact occurs, the blades open to their full 2" cutting diameter. This simplifies the design and eliminates components that can wear or fail over time.
Cut-on-contact means the broadhead begins cutting the moment the tip touches the target, without requiring any delay or mechanical trigger. The sharp .039" point and blade geometry work together so the blades engage and cut immediately upon impact, rather than relying on a collar to release them after penetration has started.
Yes. The 100-grain weight, 2" cutting diameter, and stainless steel blade construction are designed for medium-game hunting applications like deer. Always verify that your draw weight, arrow setup, and local regulations support broadhead hunting in your area.
The 100-grain weight is compatible with standard broadhead-compatible arrows and most compound and recurve setups, but your specific arrow spine, draw weight, and platform will determine suitability. Consult the broadhead compatibility guidelines for your bow and arrow system before use.
SKU: 144599888 • Width: 6.1in • Height: 1.2in • Depth: 10.8in • Weight: 0.16oz