Powder River Precision167528177
Powder River Precision Inc Xd 45 Drop In Trigger Kit$148.45
Availability: In Stock
The Powder River Precision XD 9/40 drop-in trigger kit is engineered to transform the ergonomics and feel of your Springfield XD or XDM pistol. If you shoot a 9mm or .40 S&W XD—and want to eliminate the mushy pre-travel and sluggish reset that come stock—this is a purpose-built upgrade that installs without gunsmithing. PRP's design philosophy centers on giving you a shorter, crisper trigger stroke and faster reset so you can shoot more confidently and consistently.
The kit includes PRP's well-regarded striker safety lever, which is the key to removing excess pre-travel from the stock trigger. Paired with that are four reduced-power springs: trigger spring, sear spring, striker safety spring, and striker spring. These lighter springs work together to lower the overall pull weight while maintaining reliability. The trigger itself is machined from lightweight polymer, a choice that contributes to faster reset and snappier response. An integral over-travel stop built into the back of the trigger lever prevents the bar from banging into the frame—a more elegant and less stressful approach than aftermarket over-travel blocks that hang off the outside.
When properly installed, you'll see pull weights drop to the 3.5–4.5 lb range, with noticeably shorter total trigger travel and a crisp break. The XDM variant has earned the American Pistolsmith Guild Seal of Approval, a testament to both design and quality. This kit is compatible with all XD and XDM models in 9mm and .40 S&W; the .45 XD with thumb safety is excluded due to mechanical differences.
| Brand | Powder River Precision |
| Fits | Springfield XD and XDM pistols (9mm and .40 S&W; excludes .45 XD with thumb safety) |
| Pull Weight Range | 3.5–4.5 lbs |
| Trigger Material | Lightweight polymer |
| Included Components | Striker safety lever, trigger spring, sear spring, striker safety spring, striker spring, trigger body |
No. This kit is designed for XD and XDM models chambered in 9mm and .40 S&W. It is not compatible with the .45 XD that features a thumb safety due to mechanical incompatibilities.
The kit contains a striker safety lever, trigger body (polymer), and four reduced-power springs: trigger spring, sear spring, striker safety spring, and striker spring. All components needed for installation are included.
This is a drop-in design that does not require gunsmithing. Basic pistol armorer knowledge and attention to detail are recommended; if you are not comfortable disassembling and reassembling your XD, professional installation is advised.
The kit uses reduced-power springs to achieve a lower pull weight while maintaining reliability. The integral over-travel stop design also minimizes stress on the trigger bar. If you have concerns about your specific pistol, consult Powder River Precision or a qualified armorer.
SKU: 194195294 • Weight: 0.1oz
Availability: In Stock
The Powder River Precision XD 9/40 drop-in trigger kit is engineered to transform the ergonomics and feel of your Springfield XD or XDM pistol. If you shoot a 9mm or .40 S&W XD—and want to eliminate the mushy pre-travel and sluggish reset that come stock—this is a purpose-built upgrade that installs without gunsmithing. PRP's design philosophy centers on giving you a shorter, crisper trigger stroke and faster reset so you can shoot more confidently and consistently.
The kit includes PRP's well-regarded striker safety lever, which is the key to removing excess pre-travel from the stock trigger. Paired with that are four reduced-power springs: trigger spring, sear spring, striker safety spring, and striker spring. These lighter springs work together to lower the overall pull weight while maintaining reliability. The trigger itself is machined from lightweight polymer, a choice that contributes to faster reset and snappier response. An integral over-travel stop built into the back of the trigger lever prevents the bar from banging into the frame—a more elegant and less stressful approach than aftermarket over-travel blocks that hang off the outside.
When properly installed, you'll see pull weights drop to the 3.5–4.5 lb range, with noticeably shorter total trigger travel and a crisp break. The XDM variant has earned the American Pistolsmith Guild Seal of Approval, a testament to both design and quality. This kit is compatible with all XD and XDM models in 9mm and .40 S&W; the .45 XD with thumb safety is excluded due to mechanical differences.
| Brand | Powder River Precision |
| Fits | Springfield XD and XDM pistols (9mm and .40 S&W; excludes .45 XD with thumb safety) |
| Pull Weight Range | 3.5–4.5 lbs |
| Trigger Material | Lightweight polymer |
| Included Components | Striker safety lever, trigger spring, sear spring, striker safety spring, striker spring, trigger body |
No. This kit is designed for XD and XDM models chambered in 9mm and .40 S&W. It is not compatible with the .45 XD that features a thumb safety due to mechanical incompatibilities.
The kit contains a striker safety lever, trigger body (polymer), and four reduced-power springs: trigger spring, sear spring, striker safety spring, and striker spring. All components needed for installation are included.
This is a drop-in design that does not require gunsmithing. Basic pistol armorer knowledge and attention to detail are recommended; if you are not comfortable disassembling and reassembling your XD, professional installation is advised.
The kit uses reduced-power springs to achieve a lower pull weight while maintaining reliability. The integral over-travel stop design also minimizes stress on the trigger bar. If you have concerns about your specific pistol, consult Powder River Precision or a qualified armorer.
SKU: 194195294 • Weight: 0.1oz