$54.99
Availability: In Stock
The Phase 5 Weapon Systems EBRV2308 Extended Bolt Release V2 is a low-profile aftermarket bolt catch upgrade designed for AR-10 and AR .308 rifles. If you shoot a piston gun, DI rifle, or anything in between, a quality extended bolt release transforms your manual of arms—letting you work the bolt without breaking grip or reaching across the receiver with your support hand. This black steel lever solves that problem with a simple, drop-in design that mounts to your existing receiver.
The real advantage here is speed and consistency. Magazine changes, clearing jams, and addressing double feeds all happen faster when you can manipulate the bolt from your firing grip. Push upward to lock the bolt open; press lightly downward to release it. Both motions work without moving your hand off the pistol grip, which matters whether you're running a competition stage, diagnosing a malfunction at the range, or training for duty use. The 2.15-inch extended lever gives you the mechanical advantage to do this reliably, even with gloved hands or under stress.
This is a purpose-built part for DPMS LR-308 platform rifles and Remington R-25 rifles in .308, .243, and 7mm-08. It's a genuine quality-of-life upgrade that pays for itself in saved time and smoother transitions, and it installs without gunsmithing.
| Brand | Phase 5 Weapon Systems |
| Model | EBRV2308 Extended Bolt Release V2 |
| Platform | AR-10 / DPMS LR-308 Series, Remington R-25 |
| Calibers Supported | .308 Winchester, .243 Winchester, 7mm-08 Remington |
| Lever Length | 2.15 inches |
| Material | Black Steel |
| Installation | Drop-in replacement |
This extended bolt release is designed as a drop-in replacement for DPMS LR-308 series rifles and Remington R-25 rifles in .308, .243, and 7mm-08. It is not compatible with Armalite or DPMS Gen 2 style receivers. Check your rifle's make and model before ordering to confirm compatibility.
An extended lever lets you lock and release the bolt without removing your hand from the pistol grip or reaching across the gun with your support hand. This speeds up magazine changes, helps you clear malfunctions faster, and keeps you in a stable shooting position—critical for competition, training, and duty use.
Push upward on the extended lever to lock the bolt rearward. Push lightly downward to release it. Both operations are performed from your firing grip, so your trigger finger controls the motion while your hand stays on the gun.
No. This is a drop-in replacement for the factory bolt release lever. It requires no permanent modifications to your receiver and can be swapped back to factory parts if needed.
SKU: 115733999 • Width: 4.2in • Height: 1.5in • Depth: 7in • Weight: 0.06oz
Availability: In Stock
The Phase 5 Weapon Systems EBRV2308 Extended Bolt Release V2 is a low-profile aftermarket bolt catch upgrade designed for AR-10 and AR .308 rifles. If you shoot a piston gun, DI rifle, or anything in between, a quality extended bolt release transforms your manual of arms—letting you work the bolt without breaking grip or reaching across the receiver with your support hand. This black steel lever solves that problem with a simple, drop-in design that mounts to your existing receiver.
The real advantage here is speed and consistency. Magazine changes, clearing jams, and addressing double feeds all happen faster when you can manipulate the bolt from your firing grip. Push upward to lock the bolt open; press lightly downward to release it. Both motions work without moving your hand off the pistol grip, which matters whether you're running a competition stage, diagnosing a malfunction at the range, or training for duty use. The 2.15-inch extended lever gives you the mechanical advantage to do this reliably, even with gloved hands or under stress.
This is a purpose-built part for DPMS LR-308 platform rifles and Remington R-25 rifles in .308, .243, and 7mm-08. It's a genuine quality-of-life upgrade that pays for itself in saved time and smoother transitions, and it installs without gunsmithing.
| Brand | Phase 5 Weapon Systems |
| Model | EBRV2308 Extended Bolt Release V2 |
| Platform | AR-10 / DPMS LR-308 Series, Remington R-25 |
| Calibers Supported | .308 Winchester, .243 Winchester, 7mm-08 Remington |
| Lever Length | 2.15 inches |
| Material | Black Steel |
| Installation | Drop-in replacement |
This extended bolt release is designed as a drop-in replacement for DPMS LR-308 series rifles and Remington R-25 rifles in .308, .243, and 7mm-08. It is not compatible with Armalite or DPMS Gen 2 style receivers. Check your rifle's make and model before ordering to confirm compatibility.
An extended lever lets you lock and release the bolt without removing your hand from the pistol grip or reaching across the gun with your support hand. This speeds up magazine changes, helps you clear malfunctions faster, and keeps you in a stable shooting position—critical for competition, training, and duty use.
Push upward on the extended lever to lock the bolt rearward. Push lightly downward to release it. Both operations are performed from your firing grip, so your trigger finger controls the motion while your hand stays on the gun.
No. This is a drop-in replacement for the factory bolt release lever. It requires no permanent modifications to your receiver and can be swapped back to factory parts if needed.
SKU: 115733999 • Width: 4.2in • Height: 1.5in • Depth: 7in • Weight: 0.06oz