Pearce Grip115752450
Pearce Grip PG30 Polymer Grip Extension with Textured Black Finish for Glock 30/30SF/30s$6.66
Availability: In Stock
The Pearce Grip Plug for Glock 29SF, 30SF, and 30S Gen 3 is a simple, effective solution for shooters who want a cleaner look and feel at the bottom of their compact duty or carry gun. If you've ever been bothered by that open lanyard loop at the frame's base—or you just prefer a finished appearance—this polymer plug fills that gap while actually improving your grip purchase by giving your pinky a solid surface instead of empty air. It's a small detail that makes a real difference in how the gun feels in your hand, especially during extended range sessions or training.
Installation is straightforward: the plug seats into the rear cavity of the frame and locks in via the lanyard hole, so there's no permanent modification needed. You can remove it anytime if your needs change. The black polymer material matches standard Glock aesthetics and is durable enough for hard use. Whether you're building a competition setup, a backup carry gun, or just want to tidy up a Gen 3 Glock, this is a no-nonsense upgrade that costs next to nothing but pays dividends in comfort and control.
One critical note: this plug is designed for Glock frames manufactured after July 2012. If your 29SF, 30SF, or 30S was made before that cutoff, this won't fit. Check your frame's manufacturing date if you're unsure—a quick call to Glock or a look at your paperwork will confirm. Once you've verified compatibility, you're looking at a five-minute install with no tools required.
| Fits Models | Glock 29SF, 30SF, 30S Gen 3 |
| Frame Requirement | Post-July 2012 manufacture |
| Material | Polymer |
| Color | Black |
| Installation | No tools required |
It will fit 29SF, 30SF, and 30S Gen 3 frames only if they were manufactured after July 2012. Glock changed the frame geometry around that date, so earlier models are incompatible. Check your frame's production date on the slide or contact Glock to confirm.
The plug inserts into the bottom rear cavity of the frame and locks in place using the existing lanyard hole for retention. No gunsmithing, tools, or permanent modification is required. It takes just a few seconds to install or remove.
Yes. Since it relies on the lanyard hole for retention and isn't glued or permanently attached, you can take it out anytime and revert to the open lanyard loop if needed.
Yes, for many shooters. The plug provides a solid platform for your pinky finger instead of leaving that area open, which can improve control and comfort—especially on compact guns like the 30S where real estate is tight.
SKU: 115726295 • Width: 2.7in • Height: 1.7in • Depth: 3.4in • Weight: 0.06oz
Availability: In Stock
The Pearce Grip Plug for Glock 29SF, 30SF, and 30S Gen 3 is a simple, effective solution for shooters who want a cleaner look and feel at the bottom of their compact duty or carry gun. If you've ever been bothered by that open lanyard loop at the frame's base—or you just prefer a finished appearance—this polymer plug fills that gap while actually improving your grip purchase by giving your pinky a solid surface instead of empty air. It's a small detail that makes a real difference in how the gun feels in your hand, especially during extended range sessions or training.
Installation is straightforward: the plug seats into the rear cavity of the frame and locks in via the lanyard hole, so there's no permanent modification needed. You can remove it anytime if your needs change. The black polymer material matches standard Glock aesthetics and is durable enough for hard use. Whether you're building a competition setup, a backup carry gun, or just want to tidy up a Gen 3 Glock, this is a no-nonsense upgrade that costs next to nothing but pays dividends in comfort and control.
One critical note: this plug is designed for Glock frames manufactured after July 2012. If your 29SF, 30SF, or 30S was made before that cutoff, this won't fit. Check your frame's manufacturing date if you're unsure—a quick call to Glock or a look at your paperwork will confirm. Once you've verified compatibility, you're looking at a five-minute install with no tools required.
| Fits Models | Glock 29SF, 30SF, 30S Gen 3 |
| Frame Requirement | Post-July 2012 manufacture |
| Material | Polymer |
| Color | Black |
| Installation | No tools required |
It will fit 29SF, 30SF, and 30S Gen 3 frames only if they were manufactured after July 2012. Glock changed the frame geometry around that date, so earlier models are incompatible. Check your frame's production date on the slide or contact Glock to confirm.
The plug inserts into the bottom rear cavity of the frame and locks in place using the existing lanyard hole for retention. No gunsmithing, tools, or permanent modification is required. It takes just a few seconds to install or remove.
Yes. Since it relies on the lanyard hole for retention and isn't glued or permanently attached, you can take it out anytime and revert to the open lanyard loop if needed.
Yes, for many shooters. The plug provides a solid platform for your pinky finger instead of leaving that area open, which can improve control and comfort—especially on compact guns like the 30S where real estate is tight.
SKU: 115726295 • Width: 2.7in • Height: 1.7in • Depth: 3.4in • Weight: 0.06oz