Availability: In Stock
The Pearce Grip PG26XL Polymer Grip Extension for Glock 26/27/33/39 is a no-nonsense way to get a full firing grip on a compact carry gun. If you run a subcompact Glock and your pinky finger hangs off the mag, this grip extension solves that problem by adding 1 inch of gripping surface without changing your magazine capacity or sacrificing concealability. Built from high-impact polymer with a textured finish that matches your Glock's factory look, the PG26XL replaces only your magazine base plate—all other factory components stay put.
The real appeal here is ergonomics. A proper grip means better control and faster target reacquisition on the range or in a defensive scenario. Many shooters find that subcompacts like the 26 feel cramped in their hand, and adding that extra finger room makes a measurable difference in how the gun points and manages recoil. The textured black polymer blends seamlessly with your firearm's contours, so it looks like part of the gun, not an aftermarket add-on.
These extensions are built tough—they're tested to withstand drops across a wide temperature range, from -20°F to 350°F, so they'll hold up whether you're carrying in Minnesota winters or desert heat. The PG26XL also features Mag-Track indexing, which helps if you rotate multiple magazines and want to keep them organized at a glance.
| Brand | Pearce Grip |
| Model | PG26XL |
| Compatibility | Glock 26, 27, 33, 39 |
| Material | High-impact polymer |
| Finish | Black textured |
| Gripping Surface Length Added | 1 inch |
| Installation | Replaces magazine base plate |
| Temperature Range | -20°F to 350°F |
Yes. The PG26XL is designed to fit Glock 26, 27, 33, and 39 magazines. It replaces the factory base plate, so your existing magazines will work with it—just swap the base plate.
No. The PG26XL adds length for your grip only; it does not increase magazine capacity. You get the same round count with better hand control.
The 1-inch extension adds length to the magazine that protrudes from the gun, but the extension is designed with concealability in mind—it's a minimal add and many shooters find the ergonomic gain worth the trade-off for carry or at the range.
The product includes the polymer grip extension itself. Installation simply involves removing your existing magazine base plate and replacing it with the PG26XL—no tools or gunsmithing required.
SKU: 115780288 • Width: 2.4in • Height: 1.3in • Depth: 4in • Weight: 0.06oz
Availability: In Stock
The Pearce Grip PG26XL Polymer Grip Extension for Glock 26/27/33/39 is a no-nonsense way to get a full firing grip on a compact carry gun. If you run a subcompact Glock and your pinky finger hangs off the mag, this grip extension solves that problem by adding 1 inch of gripping surface without changing your magazine capacity or sacrificing concealability. Built from high-impact polymer with a textured finish that matches your Glock's factory look, the PG26XL replaces only your magazine base plate—all other factory components stay put.
The real appeal here is ergonomics. A proper grip means better control and faster target reacquisition on the range or in a defensive scenario. Many shooters find that subcompacts like the 26 feel cramped in their hand, and adding that extra finger room makes a measurable difference in how the gun points and manages recoil. The textured black polymer blends seamlessly with your firearm's contours, so it looks like part of the gun, not an aftermarket add-on.
These extensions are built tough—they're tested to withstand drops across a wide temperature range, from -20°F to 350°F, so they'll hold up whether you're carrying in Minnesota winters or desert heat. The PG26XL also features Mag-Track indexing, which helps if you rotate multiple magazines and want to keep them organized at a glance.
| Brand | Pearce Grip |
| Model | PG26XL |
| Compatibility | Glock 26, 27, 33, 39 |
| Material | High-impact polymer |
| Finish | Black textured |
| Gripping Surface Length Added | 1 inch |
| Installation | Replaces magazine base plate |
| Temperature Range | -20°F to 350°F |
Yes. The PG26XL is designed to fit Glock 26, 27, 33, and 39 magazines. It replaces the factory base plate, so your existing magazines will work with it—just swap the base plate.
No. The PG26XL adds length for your grip only; it does not increase magazine capacity. You get the same round count with better hand control.
The 1-inch extension adds length to the magazine that protrudes from the gun, but the extension is designed with concealability in mind—it's a minimal add and many shooters find the ergonomic gain worth the trade-off for carry or at the range.
The product includes the polymer grip extension itself. Installation simply involves removing your existing magazine base plate and replacing it with the PG26XL—no tools or gunsmithing required.
SKU: 115780288 • Width: 2.4in • Height: 1.3in • Depth: 4in • Weight: 0.06oz