Pearce Grip115665945
Pearce Grip PG19 Polymer Grip Extension - Black Finish for Mid & Full Size Glock Gen3 Models$6.66
Loading...
Loading...
Loading...
Availability: In Stock
The Pearce Grip PG19G5 is a polymer grip extension designed for Glock Gen 4 and Gen 5 mid-size and full-size pistols. If you shoot a Glock regularly—whether at the range, in competition, or for carry—you've probably noticed that extended grip real estate makes a difference in control and comfort. This grip extension replaces your magazine base plate and adds roughly half an inch of gripping surface without changing how many rounds your magazine holds. It's a simple upgrade that addresses a real ergonomic gap on stock Glock baseplates.
Made from high-impact polymer with a black finish, the PG19G5 is tough enough for serious use. The grip extension works on Gen 4 and Gen 5 double-stack magazines with capacity greater than 10 rounds—specifically those with the dual notches for ambi magazine release. For Gen 5 shooters, Pearce includes an optional filler piece that accommodates the semi-circular cut-out found on the lower front of Gen 5 grip frames, so you get a clean, consistent fit across all mid and full-size Gen 5 models.
Installation is straightforward: swap out your existing magazine base plate for the extension. No gunsmithing required. Whether you're building a duty rig, fine-tuning a competition gun, or just want better purchase on a carry pistol, this is the kind of small mod that pays dividends when you're actually shooting. It's affordable, reliable, and does exactly what it promises.
| Brand | Pearce Grip |
| Model | PG19G5 |
| Material | High-impact polymer |
| Finish | Black |
| Added Gripping Surface | Approximately 1/2 inch |
| Compatibility | Glock Gen 4 and Gen 5 mid and full-size models |
| Magazine Requirement | Double-notch (ambi) magazines, capacity greater than 10 rounds |
| Includes Filler Piece | Yes, for Gen 5 models |
Yes. The PG19G5 is designed for Gen 5 models, and Pearce includes a filler piece that accommodates the semi-circular cut-out on the lower front of Gen 5 grip frames. You'll get a flush, clean fit on all Gen 5 mid and full-size Glocks.
No. The extension replaces only the base plate and does not alter magazine capacity.
The PG19G5 works only on Gen 4 and Gen 5 magazines equipped with dual notches for ambi magazine release and with capacity greater than 10 rounds. It is not compatible with Gen 3 magazines or single-notch designs.
The PG19G5 comes with the grip extension and an optional filler piece for Gen 5 models with the semi-circular cut-out.
SKU: 115713267 • Width: 5.1in • Height: 1.3in • Depth: 6.2in • Weight: 0.06oz
Availability: In Stock
The Pearce Grip PG19G5 is a polymer grip extension designed for Glock Gen 4 and Gen 5 mid-size and full-size pistols. If you shoot a Glock regularly—whether at the range, in competition, or for carry—you've probably noticed that extended grip real estate makes a difference in control and comfort. This grip extension replaces your magazine base plate and adds roughly half an inch of gripping surface without changing how many rounds your magazine holds. It's a simple upgrade that addresses a real ergonomic gap on stock Glock baseplates.
Made from high-impact polymer with a black finish, the PG19G5 is tough enough for serious use. The grip extension works on Gen 4 and Gen 5 double-stack magazines with capacity greater than 10 rounds—specifically those with the dual notches for ambi magazine release. For Gen 5 shooters, Pearce includes an optional filler piece that accommodates the semi-circular cut-out found on the lower front of Gen 5 grip frames, so you get a clean, consistent fit across all mid and full-size Gen 5 models.
Installation is straightforward: swap out your existing magazine base plate for the extension. No gunsmithing required. Whether you're building a duty rig, fine-tuning a competition gun, or just want better purchase on a carry pistol, this is the kind of small mod that pays dividends when you're actually shooting. It's affordable, reliable, and does exactly what it promises.
| Brand | Pearce Grip |
| Model | PG19G5 |
| Material | High-impact polymer |
| Finish | Black |
| Added Gripping Surface | Approximately 1/2 inch |
| Compatibility | Glock Gen 4 and Gen 5 mid and full-size models |
| Magazine Requirement | Double-notch (ambi) magazines, capacity greater than 10 rounds |
| Includes Filler Piece | Yes, for Gen 5 models |
Yes. The PG19G5 is designed for Gen 5 models, and Pearce includes a filler piece that accommodates the semi-circular cut-out on the lower front of Gen 5 grip frames. You'll get a flush, clean fit on all Gen 5 mid and full-size Glocks.
No. The extension replaces only the base plate and does not alter magazine capacity.
The PG19G5 works only on Gen 4 and Gen 5 magazines equipped with dual notches for ambi magazine release and with capacity greater than 10 rounds. It is not compatible with Gen 3 magazines or single-notch designs.
The PG19G5 comes with the grip extension and an optional filler piece for Gen 5 models with the semi-circular cut-out.
SKU: 115713267 • Width: 5.1in • Height: 1.3in • Depth: 6.2in • Weight: 0.06oz