Yankee Hill Machine200191063
YHM SRX Short QD Flash Hider 1/2x28 Thread$84.75
Availability: In Stock
The Odin Works QD Muzzle Flash Hider for 5.56 NATO is a dual-purpose muzzle device that combines flash hiding with quick-disconnect suppressor mounting in one compact package. Built for shooters who want the flexibility to run either bare or suppressed without swapping hardware, this 1/2x28 threaded component threads onto standard AR-15 and other 5.56 platforms. Whether you're at the range, hunting, or training, a unified muzzle solution saves time and simplifies your setup.
The flash hider half of the equation reduces muzzle signature in low-light conditions—a practical benefit for anyone shooting in dim environments or concerned about giving away position. The QD mounting system is engineered to work seamlessly with Odin Works Badlands Enduro and Brimstone suppressors, allowing you to clip on a can when needed and remove it just as fast when you don't. No re-zeroing or tool changes required.
Construction matters in muzzle devices, and Odin Works built this one from heat-treated stainless steel with a tough black nitride finish. That combination resists corrosion and wear even through heavy use and adverse weather. The nitride coating is also low-maintenance—a far cry from finishes that demand constant attention to stay in fighting trim.
| Caliber | 5.56 NATO |
| Thread Pattern | 1/2x28 |
| Material | Heat-treated stainless steel |
| Finish | Black nitride |
| Mount Type | Quick Disconnect (QD) |
| Compatible Suppressors | Odin Works Badlands Enduro, Brimstone |
The Odin Works QD Flash Hider uses a standard 1/2x28 thread pattern, which is the universal thread pitch for most modern 5.56 NATO rifles, including AR-15 platforms. If your rifle already has a 1/2x28 muzzle or is set up for that thread pitch, this device will fit directly.
This QD mount is specifically designed to work with Odin Works Badlands Enduro and Brimstone suppressors. Compatibility with other suppressor brands cannot be confirmed, so verify your can's mounting interface before purchasing.
The quick-disconnect system is tool-free—your suppressor clips on and off by hand in seconds. No wrench, no alignment hassles.
A standard flash hider only reduces muzzle flash. This unit does that while also serving as a suppressor mounting point, eliminating the need to swap muzzle devices when you want to run suppressed. It's a hybrid solution for shooters who want both capabilities without carrying extra hardware.
SKU: 115810160 • Width: 4.25in • Height: 1.5in • Depth: 7in • Weight: 0.31oz
Availability: In Stock
The Odin Works QD Muzzle Flash Hider for 5.56 NATO is a dual-purpose muzzle device that combines flash hiding with quick-disconnect suppressor mounting in one compact package. Built for shooters who want the flexibility to run either bare or suppressed without swapping hardware, this 1/2x28 threaded component threads onto standard AR-15 and other 5.56 platforms. Whether you're at the range, hunting, or training, a unified muzzle solution saves time and simplifies your setup.
The flash hider half of the equation reduces muzzle signature in low-light conditions—a practical benefit for anyone shooting in dim environments or concerned about giving away position. The QD mounting system is engineered to work seamlessly with Odin Works Badlands Enduro and Brimstone suppressors, allowing you to clip on a can when needed and remove it just as fast when you don't. No re-zeroing or tool changes required.
Construction matters in muzzle devices, and Odin Works built this one from heat-treated stainless steel with a tough black nitride finish. That combination resists corrosion and wear even through heavy use and adverse weather. The nitride coating is also low-maintenance—a far cry from finishes that demand constant attention to stay in fighting trim.
| Caliber | 5.56 NATO |
| Thread Pattern | 1/2x28 |
| Material | Heat-treated stainless steel |
| Finish | Black nitride |
| Mount Type | Quick Disconnect (QD) |
| Compatible Suppressors | Odin Works Badlands Enduro, Brimstone |
The Odin Works QD Flash Hider uses a standard 1/2x28 thread pattern, which is the universal thread pitch for most modern 5.56 NATO rifles, including AR-15 platforms. If your rifle already has a 1/2x28 muzzle or is set up for that thread pitch, this device will fit directly.
This QD mount is specifically designed to work with Odin Works Badlands Enduro and Brimstone suppressors. Compatibility with other suppressor brands cannot be confirmed, so verify your can's mounting interface before purchasing.
The quick-disconnect system is tool-free—your suppressor clips on and off by hand in seconds. No wrench, no alignment hassles.
A standard flash hider only reduces muzzle flash. This unit does that while also serving as a suppressor mounting point, eliminating the need to swap muzzle devices when you want to run suppressed. It's a hybrid solution for shooters who want both capabilities without carrying extra hardware.
SKU: 115810160 • Width: 4.25in • Height: 1.5in • Depth: 7in • Weight: 0.31oz