Odin Works115687068
Odin Works Low Profile Adjustable Gas Block – Precision Machined for AR-15 / AR-10 Platforms$32.30
Availability: In Stock
The Odin Works Low Profile Adjustable Gas Block for AR-15 Rifles gives you real-time control over your rifle's gas system—without the guesswork or permanent modifications. If you're running an AR-15 and want to dial in the perfect cycling rate for your specific load, barrel length, and suppressor setup, a quality adjustable gas block is one of the most practical upgrades you can make. This one cuts the profile low to keep your handguard real estate clear and your rifle balanced.
Built from carbon steel with a tough nitrided finish, the Odin Works block handles the heat and abuse of repeated shooting sessions. The stainless steel adjustment screw and spring are engineered to stay reliable under temperature swings that would break lesser components. You get 20 detent positions to lock in your setting—no set screws to lose or come loose. Simply turn the screw to your sweet spot and it stays there. The whole assembly (detent ball, cross pin, and hex wrenches included) weighs just 2.45 oz, so it won't throw off your AR's balance.
An adjustable gas block lets you reduce felt recoil, decrease bolt and carrier wear, and experiment with different ammunition weights and types without needing a new barrel or piston system. Whether you're running suppressed, unsuppressed, hunting, or running drills at the range, the ability to tune gas flow on the fly is genuinely valuable. Note that this block is not compatible with pistol-length gas systems or high-pressure ammunition, and it's designed for .936-inch diameter barrels.
| Material | Carbon Steel, Nitrided Finish |
| Adjustment Screw | Stainless Steel |
| Barrel Diameter Compatibility | .936 inch |
| Adjustment Positions | 20 detent clicks |
| Weight | 2.45 oz (with detent ball, screws, and pin) |
| Included Components | Detent ball, cross pin, set screws, hex wrenches |
| Not Compatible With | Pistol-length gas systems; high-pressure ammunition |
The Odin Works block is designed for barrels with a .936-inch diameter. Measure your barrel's gas port journal to confirm compatibility before ordering.
Yes—that's the whole point of an adjustable gas block. You can dial it in for suppressed fire, unsuppressed shooting, light target loads, or heavy hunting rounds. The 20 detent positions give you the flexibility to tune for different setups. Just avoid high-pressure ammunition as noted by the manufacturer.
The block ships with a detent ball, cross pin, set screws, and hex wrenches—everything you need to install and adjust it. You'll also have spare hardware in case you need it down the road.
Yes. The Odin Works design keeps the footprint compact so it won't interfere with most handguard setups and leaves your rail space open for optics and accessories.
SKU: 115647740 • Width: 3.6in • Height: 2in • Depth: 7.5in • Weight: 0.25oz
Availability: In Stock
The Odin Works Low Profile Adjustable Gas Block for AR-15 Rifles gives you real-time control over your rifle's gas system—without the guesswork or permanent modifications. If you're running an AR-15 and want to dial in the perfect cycling rate for your specific load, barrel length, and suppressor setup, a quality adjustable gas block is one of the most practical upgrades you can make. This one cuts the profile low to keep your handguard real estate clear and your rifle balanced.
Built from carbon steel with a tough nitrided finish, the Odin Works block handles the heat and abuse of repeated shooting sessions. The stainless steel adjustment screw and spring are engineered to stay reliable under temperature swings that would break lesser components. You get 20 detent positions to lock in your setting—no set screws to lose or come loose. Simply turn the screw to your sweet spot and it stays there. The whole assembly (detent ball, cross pin, and hex wrenches included) weighs just 2.45 oz, so it won't throw off your AR's balance.
An adjustable gas block lets you reduce felt recoil, decrease bolt and carrier wear, and experiment with different ammunition weights and types without needing a new barrel or piston system. Whether you're running suppressed, unsuppressed, hunting, or running drills at the range, the ability to tune gas flow on the fly is genuinely valuable. Note that this block is not compatible with pistol-length gas systems or high-pressure ammunition, and it's designed for .936-inch diameter barrels.
| Material | Carbon Steel, Nitrided Finish |
| Adjustment Screw | Stainless Steel |
| Barrel Diameter Compatibility | .936 inch |
| Adjustment Positions | 20 detent clicks |
| Weight | 2.45 oz (with detent ball, screws, and pin) |
| Included Components | Detent ball, cross pin, set screws, hex wrenches |
| Not Compatible With | Pistol-length gas systems; high-pressure ammunition |
The Odin Works block is designed for barrels with a .936-inch diameter. Measure your barrel's gas port journal to confirm compatibility before ordering.
Yes—that's the whole point of an adjustable gas block. You can dial it in for suppressed fire, unsuppressed shooting, light target loads, or heavy hunting rounds. The 20 detent positions give you the flexibility to tune for different setups. Just avoid high-pressure ammunition as noted by the manufacturer.
The block ships with a detent ball, cross pin, set screws, and hex wrenches—everything you need to install and adjust it. You'll also have spare hardware in case you need it down the road.
Yes. The Odin Works design keeps the footprint compact so it won't interfere with most handguard setups and leaves your rail space open for optics and accessories.
SKU: 115647740 • Width: 3.6in • Height: 2in • Depth: 7.5in • Weight: 0.25oz