Availability: In Stock
The Bayco Nightstick shotgun end light is a complete forend replacement built specifically for 12-gauge Mossberg 500, 590, 590A1, and Shockwave pump-action shotguns. If you're running a home-defense or tactical shotgun and need serious light output without adding a separate rail-mounted fixture, this is a straightforward solution: it becomes your forend and your weapon light in one package. The design starts with a heavy-duty glass-filled nylon body paired with an over-molded rubber grip, so you're not sacrificing durability or control when you grab it under pressure.
The LED punches 1200 lumens with a tightly focused beam generated by a deep parabolic reflector—designed to reach out to 203 meters, which means you've got real standoff distance when you need it. Runtime sits at roughly 90 minutes per charge. Both sides have ambidextrous switches positioned near the front of the forend for intuitive thumb activation, and each button gets a small raised bump guard to prevent accidental discharge when you're cycling the action or laying the gun down. The ergonomic palm swell is there to help you maintain a solid grip when you're actually working the light during stress or movement.
The package includes two CR123 batteries to get you running right out of the box, plus a hand stop/safety strap and the SFL action tube nut wrench you'll need to swap out the factory castle nut and pump handle foreend. If you want to step up to rechargeable power, an optional 18650 lithium-ion kit is available separately. Installation is straightforward—it's a direct forend swap on your compatible Mossberg, no gunsmithing required.
| Brand | Bayco |
| Model | Nightstick SFL Shotgun End Light |
| Compatibility | Mossberg 500, 590, 590A1, Shockwave (12-gauge pump-action) |
| Light Output | 1200 lumens |
| Beam Distance | 203 meters |
| Runtime | Approximately 90 minutes (on CR123 batteries) |
| Battery Type | Two CR123 (included); optional 18650 li-ion kit available |
| Material | Glass-filled nylon body with over-molded rubber grip |
| Switch Type | Ambidextrous, bump-guarded |
| Includes | Hand stop/safety strap, SFL action tube nut wrench, two CR123 batteries |
The Nightstick forend light is designed as a direct replacement for Mossberg 500, 590, 590A1, and Shockwave pump-action shotguns in 12 gauge. It replaces your factory forend entirely, so compatibility is straightforward—no adapters or rail systems required.
The 1200-lumen LED projects a tightly focused beam out to 203 meters using a deep parabolic reflector. That's genuine standoff distance for home-defense, tactical, or duty use where you need to identify targets or threats at meaningful range.
Two CR123 batteries are included in the box and deliver approximately 90 minutes of runtime. You can also upgrade to rechargeable 18650 lithium-ion batteries using an optional kit sold separately, giving you a more economical long-term option if you're running the light regularly.
You get the forend light assembly itself, two CR123 batteries, a hand stop/safety strap for added control, and the SFL action tube nut wrench needed to remove your factory castle nut and original forend during installation.
SKU: 167522913 • Width: 4in • Height: 3.75in • Depth: 9.15in • Weight: 1.655oz
Availability: In Stock
The Bayco Nightstick shotgun end light is a complete forend replacement built specifically for 12-gauge Mossberg 500, 590, 590A1, and Shockwave pump-action shotguns. If you're running a home-defense or tactical shotgun and need serious light output without adding a separate rail-mounted fixture, this is a straightforward solution: it becomes your forend and your weapon light in one package. The design starts with a heavy-duty glass-filled nylon body paired with an over-molded rubber grip, so you're not sacrificing durability or control when you grab it under pressure.
The LED punches 1200 lumens with a tightly focused beam generated by a deep parabolic reflector—designed to reach out to 203 meters, which means you've got real standoff distance when you need it. Runtime sits at roughly 90 minutes per charge. Both sides have ambidextrous switches positioned near the front of the forend for intuitive thumb activation, and each button gets a small raised bump guard to prevent accidental discharge when you're cycling the action or laying the gun down. The ergonomic palm swell is there to help you maintain a solid grip when you're actually working the light during stress or movement.
The package includes two CR123 batteries to get you running right out of the box, plus a hand stop/safety strap and the SFL action tube nut wrench you'll need to swap out the factory castle nut and pump handle foreend. If you want to step up to rechargeable power, an optional 18650 lithium-ion kit is available separately. Installation is straightforward—it's a direct forend swap on your compatible Mossberg, no gunsmithing required.
| Brand | Bayco |
| Model | Nightstick SFL Shotgun End Light |
| Compatibility | Mossberg 500, 590, 590A1, Shockwave (12-gauge pump-action) |
| Light Output | 1200 lumens |
| Beam Distance | 203 meters |
| Runtime | Approximately 90 minutes (on CR123 batteries) |
| Battery Type | Two CR123 (included); optional 18650 li-ion kit available |
| Material | Glass-filled nylon body with over-molded rubber grip |
| Switch Type | Ambidextrous, bump-guarded |
| Includes | Hand stop/safety strap, SFL action tube nut wrench, two CR123 batteries |
The Nightstick forend light is designed as a direct replacement for Mossberg 500, 590, 590A1, and Shockwave pump-action shotguns in 12 gauge. It replaces your factory forend entirely, so compatibility is straightforward—no adapters or rail systems required.
The 1200-lumen LED projects a tightly focused beam out to 203 meters using a deep parabolic reflector. That's genuine standoff distance for home-defense, tactical, or duty use where you need to identify targets or threats at meaningful range.
Two CR123 batteries are included in the box and deliver approximately 90 minutes of runtime. You can also upgrade to rechargeable 18650 lithium-ion batteries using an optional kit sold separately, giving you a more economical long-term option if you're running the light regularly.
You get the forend light assembly itself, two CR123 batteries, a hand stop/safety strap for added control, and the SFL action tube nut wrench needed to remove your factory castle nut and original forend during installation.
SKU: 167522913 • Width: 4in • Height: 3.75in • Depth: 9.15in • Weight: 1.655oz