Montana X-Treme167525565
Montana X-Treme 22-264 Cal 36" Cleaning Rod$87.89
Availability: In Stock
A quality cleaning rod is just as important as your rifle itself—it's your first line of defense against fouling and bore corrosion. The Montana X-Treme .22 - .264 Cal Cleaning Rod is a 42-inch, single-piece rod built to handle centerfire and rimfire rifles in the smaller caliber range without compromise. Coated in a proprietary nonembedding finish, this rod resists the accumulation of dirt and grit that can scratch or score your bore during aggressive cleaning sessions. Whether you're running brushes through a fouled .22 or pushing patches down a .264 Magnum, the spring steel construction gives you the rigidity to work through stubborn carbon without flex or failure.
The machined aluminum handle is engineered slim enough that you can work from the breech without the stock getting in your way, yet it's still substantial enough for a secure grip and precise control. Bearings at both ends of the handle let the rod spin freely, keeping your brush or jag centered and fully engaged with the rifling as you clean. That smooth rotation matters when you're trying to do a thorough job without introducing wear patterns or uneven contact. The color-coded handle takes the guesswork out of reach-and-grab—you'll grab the right rod the first time, every time.
Protection is built in: a soft aluminum ferrule at the threaded end guards your rifle's breech or muzzle from dings and damage during rod installation and removal. After hundreds of cleaning cycles, that attention to detail keeps your rifle looking as good as it performs.
| Length | 42 inches |
| Caliber Range | .22 - .264 |
| Construction | Single-piece coated spring steel |
| Handle Material | Machined aluminum |
| Ferrule Material | Soft aluminum |
The Montana X-Treme rod is sized for rifles from .22 caliber up through .264 caliber, covering most rimfire and centerfire rifles in that range.
Yes. The slim aluminum handle is specifically designed to avoid contact with the rifle stock when cleaning from the breech, making it easy to work from that direction without disassembly.
The bearings at each end allow the rod to rotate smoothly under your hand, which keeps your brush or jag fully engaged with the rifling as you push and pull, improving cleaning effectiveness and reducing wear.
A soft aluminum ferrule is threaded onto the rod end to protect your rifle's breech or muzzle from impact and damage during installation and removal.
SKU: 167525563 • Width: 1.25in • Height: 1.25in • Depth: 49.5in • Weight: 0.76oz
Availability: In Stock
A quality cleaning rod is just as important as your rifle itself—it's your first line of defense against fouling and bore corrosion. The Montana X-Treme .22 - .264 Cal Cleaning Rod is a 42-inch, single-piece rod built to handle centerfire and rimfire rifles in the smaller caliber range without compromise. Coated in a proprietary nonembedding finish, this rod resists the accumulation of dirt and grit that can scratch or score your bore during aggressive cleaning sessions. Whether you're running brushes through a fouled .22 or pushing patches down a .264 Magnum, the spring steel construction gives you the rigidity to work through stubborn carbon without flex or failure.
The machined aluminum handle is engineered slim enough that you can work from the breech without the stock getting in your way, yet it's still substantial enough for a secure grip and precise control. Bearings at both ends of the handle let the rod spin freely, keeping your brush or jag centered and fully engaged with the rifling as you clean. That smooth rotation matters when you're trying to do a thorough job without introducing wear patterns or uneven contact. The color-coded handle takes the guesswork out of reach-and-grab—you'll grab the right rod the first time, every time.
Protection is built in: a soft aluminum ferrule at the threaded end guards your rifle's breech or muzzle from dings and damage during rod installation and removal. After hundreds of cleaning cycles, that attention to detail keeps your rifle looking as good as it performs.
| Length | 42 inches |
| Caliber Range | .22 - .264 |
| Construction | Single-piece coated spring steel |
| Handle Material | Machined aluminum |
| Ferrule Material | Soft aluminum |
The Montana X-Treme rod is sized for rifles from .22 caliber up through .264 caliber, covering most rimfire and centerfire rifles in that range.
Yes. The slim aluminum handle is specifically designed to avoid contact with the rifle stock when cleaning from the breech, making it easy to work from that direction without disassembly.
The bearings at each end allow the rod to rotate smoothly under your hand, which keeps your brush or jag fully engaged with the rifling as you push and pull, improving cleaning effectiveness and reducing wear.
A soft aluminum ferrule is threaded onto the rod end to protect your rifle's breech or muzzle from impact and damage during installation and removal.
SKU: 167525563 • Width: 1.25in • Height: 1.25in • Depth: 49.5in • Weight: 0.76oz