Midwest Industries200189711
MIDWEST MK2 T2 AIMPOINT MOUNT COWIT$89.95
Availability: In Stock
The Midwest Industries MK2 T2 Aimpoint mount delivers a no-compromise way to run your Aimpoint T2 red dot at 1/3 cowitness height. Built in the USA from hard-coat anodized 6061 aluminum and fitted with 4140 heat-treated steel clamps, this optic mount is engineered to handle hard use while maintaining zero shot after shot. Whether you're setting up a duty rifle, patrol gun, or dedicated close-quarters carbine, the 1/3 cowitness position lets you use your irons through the window of your red dot—a practical setup for shooters who want backup aiming options without sacrificing sight picture.
Midwest's MK2 series represents a thoughtful step up from bare-bones mounts. The precision-machined design ensures your optic sits dead-true on the rail, and the integrated Torx hardware in the clamps tightens down solid and stays there. A precision-engraved finish gives the mount a clean, professional look that won't show fingerprints or wear like raw aluminum. Best of all, you get Midwest's optic mount tool included in the box—no hunting for the right hex key or guessing at torque values.
1/3 cowitness height splits the difference between absolute and lower positions, letting you see your iron sights clearly while keeping a compact, shootable sight picture. This height works well on AR-pattern rifles, AR pistols, and any flat-top that benefits from a backup sight picture aligned with your optics. If you ever need to swap your T2 for a different dot or clone, optic-specific replacement scope ring caps are available separately.
| Brand | Midwest Industries |
| Mount Type | Optic-specific, flat-top rail mount |
| Optic Fit | Aimpoint T2 |
| Height Configuration | Lower 1/3 Cowitness |
| Material (Body) | 6061 Aluminum, hard-coat anodized |
| Material (Clamps) | 4140 heat-treated steel |
| Hardware | Integrated Torx |
| Included Accessories | Midwest Industries Optic Mount Tool |
| Warranty | Lifetime |
| Country of Origin | USA |
The MK2 is available in a Lower 1/3 Cowitness height configuration, which positions your T2 so that backup iron sights are visible through the red dot window. This height is compatible with any AR-pattern rifle, AR pistol, or other firearm with a Picatinny flat-top rail. It works especially well on builds where you want both a primary optic and usable backup sights.
Yes. The MK2 Series is specifically engineered for the Aimpoint T2 red dot. Midwest also offers MK2 mounts patterned for Acro, RMR, and Micro dot clones if you use a different optic.
The MK2 T2 mount ships with the Midwest Industries Optic Mount Tool, which lets you adjust your optic and complete installation without additional tools.
Yes. The MK2 T2 Aimpoint mount is manufactured in the USA and backed by Midwest Industries' lifetime warranty.
SKU: 200189704 • Width: 3in • Height: 2.25in • Depth: 3in • Weight: 0.5oz
Availability: In Stock
The Midwest Industries MK2 T2 Aimpoint mount delivers a no-compromise way to run your Aimpoint T2 red dot at 1/3 cowitness height. Built in the USA from hard-coat anodized 6061 aluminum and fitted with 4140 heat-treated steel clamps, this optic mount is engineered to handle hard use while maintaining zero shot after shot. Whether you're setting up a duty rifle, patrol gun, or dedicated close-quarters carbine, the 1/3 cowitness position lets you use your irons through the window of your red dot—a practical setup for shooters who want backup aiming options without sacrificing sight picture.
Midwest's MK2 series represents a thoughtful step up from bare-bones mounts. The precision-machined design ensures your optic sits dead-true on the rail, and the integrated Torx hardware in the clamps tightens down solid and stays there. A precision-engraved finish gives the mount a clean, professional look that won't show fingerprints or wear like raw aluminum. Best of all, you get Midwest's optic mount tool included in the box—no hunting for the right hex key or guessing at torque values.
1/3 cowitness height splits the difference between absolute and lower positions, letting you see your iron sights clearly while keeping a compact, shootable sight picture. This height works well on AR-pattern rifles, AR pistols, and any flat-top that benefits from a backup sight picture aligned with your optics. If you ever need to swap your T2 for a different dot or clone, optic-specific replacement scope ring caps are available separately.
| Brand | Midwest Industries |
| Mount Type | Optic-specific, flat-top rail mount |
| Optic Fit | Aimpoint T2 |
| Height Configuration | Lower 1/3 Cowitness |
| Material (Body) | 6061 Aluminum, hard-coat anodized |
| Material (Clamps) | 4140 heat-treated steel |
| Hardware | Integrated Torx |
| Included Accessories | Midwest Industries Optic Mount Tool |
| Warranty | Lifetime |
| Country of Origin | USA |
The MK2 is available in a Lower 1/3 Cowitness height configuration, which positions your T2 so that backup iron sights are visible through the red dot window. This height is compatible with any AR-pattern rifle, AR pistol, or other firearm with a Picatinny flat-top rail. It works especially well on builds where you want both a primary optic and usable backup sights.
Yes. The MK2 Series is specifically engineered for the Aimpoint T2 red dot. Midwest also offers MK2 mounts patterned for Acro, RMR, and Micro dot clones if you use a different optic.
The MK2 T2 mount ships with the Midwest Industries Optic Mount Tool, which lets you adjust your optic and complete installation without additional tools.
Yes. The MK2 T2 Aimpoint mount is manufactured in the USA and backed by Midwest Industries' lifetime warranty.
SKU: 200189704 • Width: 3in • Height: 2.25in • Depth: 3in • Weight: 0.5oz