Midwest Industries126458312
Midwest Industries AK Picatinny End Plate Adapter – Durable, Easy Installation$99.95
Availability: In Stock
If you're running a Marlin 336 or 1894 with a barrel band and want to modernize your rifle's ergonomics and accessories rail real estate, the Midwest Industries Marlin 336 handguard adapter is your bridge between classic lever-action geometry and contemporary M-Lok gear. This aluminum adapter lets you install the MI-MARMR M-Lok handguard on barrel-band equipped Marlins, giving you a solid mounting platform for lights, lasers, grips, and other rail-compatible attachments without permanent modifications to your rifle.
The adapter is purpose-built for Marlin 336 and 1894 rifles where the distance from the front of the receiver to the barrel band screw measures 8-3/8 inches. It clamps directly to the magazine tube and barrel band using a mounting screw, keeping installation straightforward and tool-light. Constructed from 6061 aluminum and finished with hard coat anodizing, it's built to handle field use and cleaning cycles without fading or wearing through.
Made in the USA and backed by a lifetime warranty, this adapter weighs just 0.8 ounces—negligible enough that you won't notice it at the balance point. Whether you're upgrading a hunting rifle or a competition gun, it's a clean way to add modern accessory capability to a time-tested platform.
| Compatibility | Marlin 336 / 1894 rifles with barrel band (receiver front to barrel band screw distance: 8-3/8") |
| Material | 6061 aluminum, hard coat anodized |
| Length | 2.0 inches |
| Weight | 0.8 oz |
| Installation | Clamps to magazine tube and barrel band with included mounting screw |
| Warranty | Lifetime |
| Origin | Made in USA |
The adapter is designed for Marlin 336 and 1894 rifles equipped with barrel bands, provided the distance from the front of the receiver to the barrel band screw is 8-3/8 inches. If your rifle measures differently, this adapter will not fit properly. Verify your rifle's measurement before ordering.
The Midwest Marlin 336 handguard adapter is engineered to accept the Midwest Industries MI-MARMR M-Lok handguard. It provides the mounting interface needed to install that handguard on barrel-band rifles.
The adapter includes the aluminum clamp body and the mounting screw required for installation. No additional hardware is needed to attach it to your rifle.
No. The adapter clamps directly to the magazine tube and barrel band without drilling, welding, or altering the rifle itself. It can be removed or swapped if needed.
SKU: 115650181 • Width: 2.25in • Height: 2.25in • Depth: 4in • Weight: 0.19oz
Availability: In Stock
If you're running a Marlin 336 or 1894 with a barrel band and want to modernize your rifle's ergonomics and accessories rail real estate, the Midwest Industries Marlin 336 handguard adapter is your bridge between classic lever-action geometry and contemporary M-Lok gear. This aluminum adapter lets you install the MI-MARMR M-Lok handguard on barrel-band equipped Marlins, giving you a solid mounting platform for lights, lasers, grips, and other rail-compatible attachments without permanent modifications to your rifle.
The adapter is purpose-built for Marlin 336 and 1894 rifles where the distance from the front of the receiver to the barrel band screw measures 8-3/8 inches. It clamps directly to the magazine tube and barrel band using a mounting screw, keeping installation straightforward and tool-light. Constructed from 6061 aluminum and finished with hard coat anodizing, it's built to handle field use and cleaning cycles without fading or wearing through.
Made in the USA and backed by a lifetime warranty, this adapter weighs just 0.8 ounces—negligible enough that you won't notice it at the balance point. Whether you're upgrading a hunting rifle or a competition gun, it's a clean way to add modern accessory capability to a time-tested platform.
| Compatibility | Marlin 336 / 1894 rifles with barrel band (receiver front to barrel band screw distance: 8-3/8") |
| Material | 6061 aluminum, hard coat anodized |
| Length | 2.0 inches |
| Weight | 0.8 oz |
| Installation | Clamps to magazine tube and barrel band with included mounting screw |
| Warranty | Lifetime |
| Origin | Made in USA |
The adapter is designed for Marlin 336 and 1894 rifles equipped with barrel bands, provided the distance from the front of the receiver to the barrel band screw is 8-3/8 inches. If your rifle measures differently, this adapter will not fit properly. Verify your rifle's measurement before ordering.
The Midwest Marlin 336 handguard adapter is engineered to accept the Midwest Industries MI-MARMR M-Lok handguard. It provides the mounting interface needed to install that handguard on barrel-band rifles.
The adapter includes the aluminum clamp body and the mounting screw required for installation. No additional hardware is needed to attach it to your rifle.
No. The adapter clamps directly to the magazine tube and barrel band without drilling, welding, or altering the rifle itself. It can be removed or swapped if needed.
SKU: 115650181 • Width: 2.25in • Height: 2.25in • Depth: 4in • Weight: 0.19oz