Midwest Industries194195684
Midwest Industries T1/T2 Red Dot Optic Mount Lower 1/3 Black$73.95
Loading...
Loading...
Loading...
Availability: In Stock
The Midwest Industries T1/T2 red dot optic mount in night vision height gives you a purpose-built platform for mounting compatible red dots on modern tactical rifles. Whether you're running an Aimpoint, Holosun, Sig Sauer, or quality clone, this aluminum mount positions your optic at the optimal sight line for co-witness with night vision or standard magnified optics mounted behind it. Built to withstand duty-grade use, it's the kind of mount that soldiers and law enforcement depend on—and now available for hunters, competition shooters, and serious sport enthusiasts who demand the same reliability.
Machined from aerospace-grade 6061-T6 aluminum and finished with milspec hard coat anodizing, this mount is lightweight without compromise. The design eliminates snag points and uses robust steel cross bolts with stainless helicoils to deliver clamping force that keeps your optic rock-solid through recoil and rough handling. Every detail—from material selection to the inclusion of installation hardware—reflects Midwest Industries' commitment to no-nonsense American manufacturing and a lifetime warranty backing your purchase.
Setup is straightforward: mount your T1/T2-compatible red dot to the optic using the manufacturer's torque spec, slide the mount onto your upper receiver, and torque the cross bolts to 40 inch-pounds. The modular design means you can swap optics without removing the mount, and the night vision height opening gives you the flexibility to run dual-optic setups or position your dot optimally for your sighting system. This is the foundation of a serious, reconfigurable rifle setup.
| Brand | Midwest Industries |
| Mount Height | Night Vision Height |
| Material | 6061-T6 Aluminum (billet machined) |
| Finish | Milspec Hard Coat Anodized |
| Color | Black |
| Fasteners | Steel cross bolts with stainless helicoils |
| Torque Spec | 40 inch-pounds (cross bolts) |
| Warranty | Lifetime (Midwest Industries) |
| Made In | USA |
This mount accepts any optic with a T1/T2 interface, including Aimpoint T1/T2, H1/H2, and Comp M5; Holosun HE403, HE503, and HE515; Sig Sauer Romeo4 and Romeo5; Primary Arms SLx; Advanced Micro Dot; and quality third-party T1 interface clones.
Night vision height mounts position the optic higher on the receiver, allowing you to run night vision goggles or magnified optics underneath without interference. This makes it ideal for dual-optic setups or transitioning between different sighting systems.
All installation tools and hardware necessary for mounting are included in the box. You'll need only a torque wrench set to the manufacturer's specification for your specific red dot, plus a second torque wrench for the mount's cross bolts at 40 inch-pounds.
Yes. Midwest Industries manufactures this mount entirely in the USA from aerospace-grade aluminum, and backs it with a lifetime warranty.
SKU: 194195678 • Weight: 0.2oz
Availability: In Stock
The Midwest Industries T1/T2 red dot optic mount in night vision height gives you a purpose-built platform for mounting compatible red dots on modern tactical rifles. Whether you're running an Aimpoint, Holosun, Sig Sauer, or quality clone, this aluminum mount positions your optic at the optimal sight line for co-witness with night vision or standard magnified optics mounted behind it. Built to withstand duty-grade use, it's the kind of mount that soldiers and law enforcement depend on—and now available for hunters, competition shooters, and serious sport enthusiasts who demand the same reliability.
Machined from aerospace-grade 6061-T6 aluminum and finished with milspec hard coat anodizing, this mount is lightweight without compromise. The design eliminates snag points and uses robust steel cross bolts with stainless helicoils to deliver clamping force that keeps your optic rock-solid through recoil and rough handling. Every detail—from material selection to the inclusion of installation hardware—reflects Midwest Industries' commitment to no-nonsense American manufacturing and a lifetime warranty backing your purchase.
Setup is straightforward: mount your T1/T2-compatible red dot to the optic using the manufacturer's torque spec, slide the mount onto your upper receiver, and torque the cross bolts to 40 inch-pounds. The modular design means you can swap optics without removing the mount, and the night vision height opening gives you the flexibility to run dual-optic setups or position your dot optimally for your sighting system. This is the foundation of a serious, reconfigurable rifle setup.
| Brand | Midwest Industries |
| Mount Height | Night Vision Height |
| Material | 6061-T6 Aluminum (billet machined) |
| Finish | Milspec Hard Coat Anodized |
| Color | Black |
| Fasteners | Steel cross bolts with stainless helicoils |
| Torque Spec | 40 inch-pounds (cross bolts) |
| Warranty | Lifetime (Midwest Industries) |
| Made In | USA |
This mount accepts any optic with a T1/T2 interface, including Aimpoint T1/T2, H1/H2, and Comp M5; Holosun HE403, HE503, and HE515; Sig Sauer Romeo4 and Romeo5; Primary Arms SLx; Advanced Micro Dot; and quality third-party T1 interface clones.
Night vision height mounts position the optic higher on the receiver, allowing you to run night vision goggles or magnified optics underneath without interference. This makes it ideal for dual-optic setups or transitioning between different sighting systems.
All installation tools and hardware necessary for mounting are included in the box. You'll need only a torque wrench set to the manufacturer's specification for your specific red dot, plus a second torque wrench for the mount's cross bolts at 40 inch-pounds.
Yes. Midwest Industries manufactures this mount entirely in the USA from aerospace-grade aluminum, and backs it with a lifetime warranty.
SKU: 194195678 • Weight: 0.2oz