Midwest Industries121685881
Midwest Industries Combat Rail T-Series Free Float Handguard 9.25" MI-CRT9.25$178.95
Availability: In Stock
The Midwest Industries Combat Rail T-Series Free Float Handguard 9.25" is a precision-engineered AR-15 rail system built for shooters who demand a clean, modular setup without compromise. This free float design isolates your barrel from handguard harmonics, letting your rifle's accuracy potential shine through—whether you're running precision rifle matches, hunting at distance, or setting up a duty-focused carbine. At 9.25" long and weighing just 11.4 oz, it strikes the balance between coverage and lightweight handling that serious AR builders expect.
Built from 6061 aluminum with Type 3 hard coat anodizing, the Combat Rail T-Series is finished to withstand hard use. The full-length top Picatinny rail provides your optic mounting platform, while T-marked slots guide accessory placement across the handguard. Two integral QD sling sockets mean you can ditch the rail-mounted adapter and reclaim real estate for lights, pressure pads, or iron sights. Every edge is fully dehorned and deburred—no sharp corners to bite your hands during weapon transitions or long range days. The 1.3" inside diameter accommodates standard-diameter gas tubes and keeps the profile trim.
Installation is straightforward: the included 4140 heat-treated barrel nut and wrench get you mounted to your upper receiver, with a patented torque plate engineered to prevent rotation. Midwest Industries machines this handguard in the USA and backs it with a lifetime warranty. Note that compatibility depends on your upper receiver—this is designed for standard forged uppers and works perfectly with them, but billet upper dimensions vary widely, so confirm fit with your billet receiver manufacturer before ordering. Not compatible with piston-driven AR platforms.
| Length | 9.25" |
| Installed Weight | 11.4 oz |
| Inside Diameter | 1.3" |
| Width | 2.15" |
| Height | 2.43" |
| Material | 6061 Aluminum, Type 3 Hard Coat Anodized |
| Top Rail | MIL-STD 1913 Picatinny, full length |
| Barrel Nut | 4140 Heat Treated (included with wrench) |
| Country of Origin | USA |
| Warranty | Lifetime |
The Combat Rail T-Series is designed for standard forged upper receivers and will work reliably with them. Billet upper receivers vary significantly in dimensions, so we recommend contacting your billet receiver manufacturer to confirm fit before purchase. This is not compatible with gas piston AR platforms.
The package includes the handguard, a 4140 heat-treated barrel nut, and the installation wrench. Optional titanium barrel nut and titanium clamp screws are available for separate purchase if you want to reduce weight further.
No, the Combat Rail T-Series is not designed for gas piston AR platforms. It is compatible with direct impingement (DI) systems using standard forged upper receivers.
The installed weight is 11.4 oz, making it a lightweight option that maintains rigidity without adding unnecessary mass to your rifle.
SKU: 121687044 • Width: 4in • Height: 3.5in • Depth: 11in • Weight: 1.38oz
Availability: In Stock
The Midwest Industries Combat Rail T-Series Free Float Handguard 9.25" is a precision-engineered AR-15 rail system built for shooters who demand a clean, modular setup without compromise. This free float design isolates your barrel from handguard harmonics, letting your rifle's accuracy potential shine through—whether you're running precision rifle matches, hunting at distance, or setting up a duty-focused carbine. At 9.25" long and weighing just 11.4 oz, it strikes the balance between coverage and lightweight handling that serious AR builders expect.
Built from 6061 aluminum with Type 3 hard coat anodizing, the Combat Rail T-Series is finished to withstand hard use. The full-length top Picatinny rail provides your optic mounting platform, while T-marked slots guide accessory placement across the handguard. Two integral QD sling sockets mean you can ditch the rail-mounted adapter and reclaim real estate for lights, pressure pads, or iron sights. Every edge is fully dehorned and deburred—no sharp corners to bite your hands during weapon transitions or long range days. The 1.3" inside diameter accommodates standard-diameter gas tubes and keeps the profile trim.
Installation is straightforward: the included 4140 heat-treated barrel nut and wrench get you mounted to your upper receiver, with a patented torque plate engineered to prevent rotation. Midwest Industries machines this handguard in the USA and backs it with a lifetime warranty. Note that compatibility depends on your upper receiver—this is designed for standard forged uppers and works perfectly with them, but billet upper dimensions vary widely, so confirm fit with your billet receiver manufacturer before ordering. Not compatible with piston-driven AR platforms.
| Length | 9.25" |
| Installed Weight | 11.4 oz |
| Inside Diameter | 1.3" |
| Width | 2.15" |
| Height | 2.43" |
| Material | 6061 Aluminum, Type 3 Hard Coat Anodized |
| Top Rail | MIL-STD 1913 Picatinny, full length |
| Barrel Nut | 4140 Heat Treated (included with wrench) |
| Country of Origin | USA |
| Warranty | Lifetime |
The Combat Rail T-Series is designed for standard forged upper receivers and will work reliably with them. Billet upper receivers vary significantly in dimensions, so we recommend contacting your billet receiver manufacturer to confirm fit before purchase. This is not compatible with gas piston AR platforms.
The package includes the handguard, a 4140 heat-treated barrel nut, and the installation wrench. Optional titanium barrel nut and titanium clamp screws are available for separate purchase if you want to reduce weight further.
No, the Combat Rail T-Series is not designed for gas piston AR platforms. It is compatible with direct impingement (DI) systems using standard forged upper receivers.
The installed weight is 11.4 oz, making it a lightweight option that maintains rigidity without adding unnecessary mass to your rifle.
SKU: 121687044 • Width: 4in • Height: 3.5in • Depth: 11in • Weight: 1.38oz