Midwest Industries115693394
Midwest Industries Gen 2 M-LOK Aluminum Handguard for AK-47/AK-74 - Black$178.95
Availability: In Stock
The Midwest Industries AK Alpha M-LOK handguard is a modern, modular rail system designed for AK-47 and AK-74 platforms with stamped receivers. If you're building or upgrading an AKM rifle and want the flexibility to run optics, accessories, and tactical attachments without permanent modifications, this aluminum handguard delivers the configurability that AK shooters have long wanted. The design stays true to the AK's heritage while adding the adaptability of modern equipment mounting standards.
What sets the AK Alpha apart is its "build-it-your-way" approach. Run it as a full handguard, use just the bottom section, add Midwest's Alpha series optic mounts and top covers, or integrate with compatible railed gas tubes—the choice is yours. The modular design means you retain your front handguard cap and sling loop, so swapping it on and off doesn't require any permanent gunsmithing. A heat shield comes standard, protecting your hand from barrel heat during extended shooting sessions.
Built from 6061 aluminum with hardcoat anodizing, this handguard is lightweight yet robust enough for serious use. M-LOK slots let you attach lights, lasers, and other gear without rails everywhere. Multiple quick-detach points give you sling mounting flexibility, and the design includes one five-slot picatinny rail section for traditional accessories. Midwest Industries manufactures this handguard in the USA and backs it with a lifetime warranty. Expect to do minor fitting on some receivers—that's normal with AK parts—but the adjustable design works with most stamped-receiver AKMs.
| Material | 6061 Aluminum, hardcoat anodized |
| Finish | Black |
| Mount Standard | M-LOK |
| Included Rail Section | One five-slot picatinny rail |
| Heat Shield | Yes, included |
| Compatibility | AK-47/AK-74 AKM stamped receiver firearms |
| Incompatibility | Yugo or milled receiver firearms |
| Models & Weights | MI-AK-ALPHA6 (6" length, 7.9 oz); MI-AK-ALPHA10.0 (10" length, 11.4 oz) |
| Made in | USA |
| Warranty | Lifetime |
The AK Alpha handguard works with most AK-47 and AK-74 rifles that use AKM stamped receivers. It will not fit Yugo or milled receiver platforms. Slight fitting may be required depending on your specific receiver and handguard cap position, which is typical for AK parts. If you're unsure about your rifle's receiver type, check with your rifle's documentation or consult the community.
Yes. The AK Alpha handguard is compatible with Midwest Industries Alpha series red dot mounts (MI-AK-ALPHA-RDM), top covers (MI-AK-ALPHA-T2M, MI-AK-ALPHA-RTC), railed gas tubes, and Ultimak rail gas tubes. This gives you plenty of options for mounting optics and other accessories depending on your setup.
No. The handguard is designed as a drop-in component that does not require permanent modifications. You'll retain your factory front handguard cap and sling loop. Minor fitting of the handguard to your receiver may be needed, but no cutting, drilling, or welding is involved.
Midwest Industries offers two lengths: the 6-inch model (7.9 oz) for a more compact setup, and the 10-inch model (11.4 oz) for additional rail real estate and control. Your choice depends on your barrel length, shooting style, and how many accessories you plan to mount.
SKU: 115687182 • Width: 3.8in • Height: 3.4in • Depth: 11in • Weight: 0.81oz
Availability: In Stock
The Midwest Industries AK Alpha M-LOK handguard is a modern, modular rail system designed for AK-47 and AK-74 platforms with stamped receivers. If you're building or upgrading an AKM rifle and want the flexibility to run optics, accessories, and tactical attachments without permanent modifications, this aluminum handguard delivers the configurability that AK shooters have long wanted. The design stays true to the AK's heritage while adding the adaptability of modern equipment mounting standards.
What sets the AK Alpha apart is its "build-it-your-way" approach. Run it as a full handguard, use just the bottom section, add Midwest's Alpha series optic mounts and top covers, or integrate with compatible railed gas tubes—the choice is yours. The modular design means you retain your front handguard cap and sling loop, so swapping it on and off doesn't require any permanent gunsmithing. A heat shield comes standard, protecting your hand from barrel heat during extended shooting sessions.
Built from 6061 aluminum with hardcoat anodizing, this handguard is lightweight yet robust enough for serious use. M-LOK slots let you attach lights, lasers, and other gear without rails everywhere. Multiple quick-detach points give you sling mounting flexibility, and the design includes one five-slot picatinny rail section for traditional accessories. Midwest Industries manufactures this handguard in the USA and backs it with a lifetime warranty. Expect to do minor fitting on some receivers—that's normal with AK parts—but the adjustable design works with most stamped-receiver AKMs.
| Material | 6061 Aluminum, hardcoat anodized |
| Finish | Black |
| Mount Standard | M-LOK |
| Included Rail Section | One five-slot picatinny rail |
| Heat Shield | Yes, included |
| Compatibility | AK-47/AK-74 AKM stamped receiver firearms |
| Incompatibility | Yugo or milled receiver firearms |
| Models & Weights | MI-AK-ALPHA6 (6" length, 7.9 oz); MI-AK-ALPHA10.0 (10" length, 11.4 oz) |
| Made in | USA |
| Warranty | Lifetime |
The AK Alpha handguard works with most AK-47 and AK-74 rifles that use AKM stamped receivers. It will not fit Yugo or milled receiver platforms. Slight fitting may be required depending on your specific receiver and handguard cap position, which is typical for AK parts. If you're unsure about your rifle's receiver type, check with your rifle's documentation or consult the community.
Yes. The AK Alpha handguard is compatible with Midwest Industries Alpha series red dot mounts (MI-AK-ALPHA-RDM), top covers (MI-AK-ALPHA-T2M, MI-AK-ALPHA-RTC), railed gas tubes, and Ultimak rail gas tubes. This gives you plenty of options for mounting optics and other accessories depending on your setup.
No. The handguard is designed as a drop-in component that does not require permanent modifications. You'll retain your factory front handguard cap and sling loop. Minor fitting of the handguard to your receiver may be needed, but no cutting, drilling, or welding is involved.
Midwest Industries offers two lengths: the 6-inch model (7.9 oz) for a more compact setup, and the 10-inch model (11.4 oz) for additional rail real estate and control. Your choice depends on your barrel length, shooting style, and how many accessories you plan to mount.
SKU: 115687182 • Width: 3.8in • Height: 3.4in • Depth: 11in • Weight: 0.81oz