Midwest Industries126458312
Midwest Industries AK Picatinny End Plate Adapter – Durable, Easy Installation$99.95
Loading...
Loading...
Loading...
Availability: In Stock
Current Stock: Out of stock
The Midwest Industries AK Picatinny end plate adapter for Yugo rifles bridges the gap between older Yugo-pattern AK builds and modern optic rails. If you're running a Yugo rifle and want to add a contemporary optic, red dot, or accessory via Picatinny rail, this adapter converts your rifle's rear trunnion to Mil-Spec 1913 rail standard — opening up compatibility with a huge ecosystem of equipment. It's a straightforward solution for shooters who refuse to leave their classic Yugo platform behind when upgrading to new glass or gear.
Installation is designed to be quick: Midwest rates the job at 15 minutes or less with proper tools, though you will need to cut away the existing stock tang to fit the adapter. Depending on your specific rifle's finish or fitment, additional gunsmithing may be required, so factor that into your plans. The adapter itself is built from 6061 hardcoat anodized aluminum, engineered to handle serious use without unnecessary weight. Steel tension blocks inside ensure a rock-solid, snug fit once mounted.
Once installed, you're not locked into one stock type. The adapter accepts both fixed and side-folding Mil-Spec 1913 stocks, letting you tailor your setup to your mission — whether that's bench shooting, tactical training, or hunting. Everything here is manufactured in the USA and backed by Midwest Industries' lifetime warranty, so you can invest with confidence.
| Brand | Midwest Industries |
| Product Type | Picatinny End Plate Adapter |
| Platform | Yugo AK Rifles |
| Rail Standard | Mil-Spec 1913 Picatinny |
| Material | 6061 Hardcoat Anodized Aluminum |
| Internal Components | Steel Tension Blocks |
| Installation Time | Approximately 15 minutes |
| Warranty | Lifetime (Midwest Industries) |
| Manufactured | USA |
This adapter is designed specifically for Yugo-pattern rifles. Verify your rifle is a Yugo model before purchasing, as Midwest Industries makes separate adapters for AKM-pattern rifles with different pin configurations (4.5 and 5.5 pin sizes). Confirm your model matches before order.
Once installed, this adapter accepts any fixed or side-folding stock that uses the Mil-Spec 1913 Picatinny interface standard. This opens up a wide range of modern stock options from multiple manufacturers.
Basic installation is rated at 15 minutes or less with proper tools. However, you must cut off the stock tang to fit the adapter. Depending on your rifle's specific condition, finish, and fitment, additional gunsmithing may be required. If you're unfamiliar with firearms modification, consulting a qualified gunsmith is recommended.
The adapter features internal steel tension blocks that create a snug, repeatable fit between your rifle's trunnion and the adapter body. This design minimizes wobble and shifting, which is critical for maintaining zero and consistency when shooting with mounted optics.
SKU: 115801292 • Weight: 0.19oz
Availability: In Stock
Current Stock: Out of stock
The Midwest Industries AK Picatinny end plate adapter for Yugo rifles bridges the gap between older Yugo-pattern AK builds and modern optic rails. If you're running a Yugo rifle and want to add a contemporary optic, red dot, or accessory via Picatinny rail, this adapter converts your rifle's rear trunnion to Mil-Spec 1913 rail standard — opening up compatibility with a huge ecosystem of equipment. It's a straightforward solution for shooters who refuse to leave their classic Yugo platform behind when upgrading to new glass or gear.
Installation is designed to be quick: Midwest rates the job at 15 minutes or less with proper tools, though you will need to cut away the existing stock tang to fit the adapter. Depending on your specific rifle's finish or fitment, additional gunsmithing may be required, so factor that into your plans. The adapter itself is built from 6061 hardcoat anodized aluminum, engineered to handle serious use without unnecessary weight. Steel tension blocks inside ensure a rock-solid, snug fit once mounted.
Once installed, you're not locked into one stock type. The adapter accepts both fixed and side-folding Mil-Spec 1913 stocks, letting you tailor your setup to your mission — whether that's bench shooting, tactical training, or hunting. Everything here is manufactured in the USA and backed by Midwest Industries' lifetime warranty, so you can invest with confidence.
| Brand | Midwest Industries |
| Product Type | Picatinny End Plate Adapter |
| Platform | Yugo AK Rifles |
| Rail Standard | Mil-Spec 1913 Picatinny |
| Material | 6061 Hardcoat Anodized Aluminum |
| Internal Components | Steel Tension Blocks |
| Installation Time | Approximately 15 minutes |
| Warranty | Lifetime (Midwest Industries) |
| Manufactured | USA |
This adapter is designed specifically for Yugo-pattern rifles. Verify your rifle is a Yugo model before purchasing, as Midwest Industries makes separate adapters for AKM-pattern rifles with different pin configurations (4.5 and 5.5 pin sizes). Confirm your model matches before order.
Once installed, this adapter accepts any fixed or side-folding stock that uses the Mil-Spec 1913 Picatinny interface standard. This opens up a wide range of modern stock options from multiple manufacturers.
Basic installation is rated at 15 minutes or less with proper tools. However, you must cut off the stock tang to fit the adapter. Depending on your rifle's specific condition, finish, and fitment, additional gunsmithing may be required. If you're unfamiliar with firearms modification, consulting a qualified gunsmith is recommended.
The adapter features internal steel tension blocks that create a snug, repeatable fit between your rifle's trunnion and the adapter body. This design minimizes wobble and shifting, which is critical for maintaining zero and consistency when shooting with mounted optics.
SKU: 115801292 • Weight: 0.19oz