Midwest Industries144599226
Mi Beretta 1301 M-Lok Handguard Blk$189.95
Availability: In Stock
The Midwest Industries shotgun stock for Beretta 1301 is a purpose-built replacement that transforms how your 1301 or 1301 Mod 2 handles behind optics and iron sights alike. Built from hard-coat anodized 6061 aluminum, this stock maintains your factory length of pull while adding genuine adjustability where it counts—a polymer cheek piece that rises or lowers to dial in your sight picture, whether you're running a red dot, magnifier, or iron sights. When you bottom out the cheek piece, it sits flush with the factory stock height, so there's no learning curve if you need to transition.
Recoil management matters on a 1301, and Midwest Industries engineered their exclusive butt pad to reduce felt recoil while gripping your shoulder securely. The ambidextrous design and grip panels work equally well for lefties and righties, with aggressive texturing that maintains control in rain or snow. Where this stock really shines is versatility: you get multiple quick-detach swivel sockets, a standard sling stud, and M-LOK slots on both sides to run shell holders, panels, or other modularity without the stock feeling over-accessorized.
Weighing just 1 lb 11 oz, the complete unit is American-made and backed by a lifetime warranty. If your current length of pull doesn't quite fit, Midwest Industries spacer plates are available separately. This is the kind of upgrade that doesn't compromise what works about the 1301—it just makes it work better when you're serious about shooting.
| Brand | Midwest Industries |
| Fits | Beretta 1301 and Beretta 1301 Mod 2 shotguns |
| Material | Hard-coat anodized 6061 aluminum (stock and grip), polymer (cheek piece) |
| Weight (complete unit) | 1 lb 11 oz |
| Length of Pull | Factory (spacer plates available for extension) |
| Cheek Piece | Adjustable polymer; lowest position aligns with factory stock height |
| Ambidextrous | Yes |
| Sling Attachment | Multiple quick-detach swivel sockets, one standard sling stud |
| Accessory Compatibility | M-LOK slots (both sides) |
| Warranty | Lifetime |
| Origin | Made in the USA |
Yes, this Midwest Industries stock is designed for Beretta 1301 and 1301 Mod 2 shotguns. It will not fit the A300 Ultima Patrol.
Yes. The adjustable polymer cheek piece raises and lowers to accommodate iron sights, red dots, and magnified optics. When fully lowered, it aligns with the height of the factory stock.
The stock maintains factory length of pull out of the box. Spacer plates are available separately if you need to extend it.
The stock features multiple quick-detach swivel sockets positioned for proper placement, plus one standard sling stud for flexible sling configuration.
SKU: 144598213 • Width: 6.45in • Height: 2.5in • Depth: 15.15in • Weight: 3oz
Availability: In Stock
The Midwest Industries shotgun stock for Beretta 1301 is a purpose-built replacement that transforms how your 1301 or 1301 Mod 2 handles behind optics and iron sights alike. Built from hard-coat anodized 6061 aluminum, this stock maintains your factory length of pull while adding genuine adjustability where it counts—a polymer cheek piece that rises or lowers to dial in your sight picture, whether you're running a red dot, magnifier, or iron sights. When you bottom out the cheek piece, it sits flush with the factory stock height, so there's no learning curve if you need to transition.
Recoil management matters on a 1301, and Midwest Industries engineered their exclusive butt pad to reduce felt recoil while gripping your shoulder securely. The ambidextrous design and grip panels work equally well for lefties and righties, with aggressive texturing that maintains control in rain or snow. Where this stock really shines is versatility: you get multiple quick-detach swivel sockets, a standard sling stud, and M-LOK slots on both sides to run shell holders, panels, or other modularity without the stock feeling over-accessorized.
Weighing just 1 lb 11 oz, the complete unit is American-made and backed by a lifetime warranty. If your current length of pull doesn't quite fit, Midwest Industries spacer plates are available separately. This is the kind of upgrade that doesn't compromise what works about the 1301—it just makes it work better when you're serious about shooting.
| Brand | Midwest Industries |
| Fits | Beretta 1301 and Beretta 1301 Mod 2 shotguns |
| Material | Hard-coat anodized 6061 aluminum (stock and grip), polymer (cheek piece) |
| Weight (complete unit) | 1 lb 11 oz |
| Length of Pull | Factory (spacer plates available for extension) |
| Cheek Piece | Adjustable polymer; lowest position aligns with factory stock height |
| Ambidextrous | Yes |
| Sling Attachment | Multiple quick-detach swivel sockets, one standard sling stud |
| Accessory Compatibility | M-LOK slots (both sides) |
| Warranty | Lifetime |
| Origin | Made in the USA |
Yes, this Midwest Industries stock is designed for Beretta 1301 and 1301 Mod 2 shotguns. It will not fit the A300 Ultima Patrol.
Yes. The adjustable polymer cheek piece raises and lowers to accommodate iron sights, red dots, and magnified optics. When fully lowered, it aligns with the height of the factory stock.
The stock maintains factory length of pull out of the box. Spacer plates are available separately if you need to extend it.
The stock features multiple quick-detach swivel sockets positioned for proper placement, plus one standard sling stud for flexible sling configuration.
SKU: 144598213 • Width: 6.45in • Height: 2.5in • Depth: 15.15in • Weight: 3oz