MARK 7 RELOADING167523548
Mark 7 Reloading Swagesense Assembly For The 1050 Autodrives$194.86
Availability: In Stock
Current Stock: Out of stock
The Mark 7 Autodrive is a motorized automation system that transforms your Dillon progressive press into a high-speed production machine. If you're running a CP2000, RL1100, or Super 1050, this plug-and-play drive system handles the mechanical work—delivering consistent power at up to 3500 rounds per hour. The whole assembly mounts on a ½-inch aluminum billet base plate and arrives pre-assembled and ready to install, typically in 20–30 minutes, with no modifications to your existing press required.
What sets the Autodrive apart is its integrated control system: a 10-inch digital tablet (included) gives you real-time monitoring and on-the-fly adjustments—no separate control boxes cluttering your bench. The microprocessor-controlled setup handles digital clutch pressure, jog speed, dwell time, and emergency stop all from that single screen. You get a 1.5 HP high-torque motor paired with a CNC-grade planetary gearbox and maintenance-free timing belt drive, engineered to run smoothly at selectable speeds. The system is fully compatible with leading bullet feeders like Mr. Bulletfeeder and GSI, so you can automate your case feeding and bullet seating in one integrated workflow.
International reloaders will appreciate the dual-voltage design: run it at 110V or 220V, 50 Hz or 60 Hz, with no performance variation. The software is upgradeable for life, and the system's user-configurable settings let you dial in your process exactly. Whether you're a serious high-volume loader looking to streamline production or a competitive shooter who needs consistent output, the Autodrive transforms manual press operation into efficient automation.
| Motor | 1.5 HP high-torque |
| Gearbox | CNC-grade planetary |
| Maximum Speed | 3500 rounds per hour |
| Control System | 10-inch digital tablet (included) |
| Base Plate | ½-inch aluminum billet |
| Drive System | Maintenance-free timing belt |
| Voltage Options | 110V or 220V |
| Frequency | 50 Hz or 60 Hz |
| Machine Height | 41 inches (104 cm) |
| Machine Width | 16 inches (40.6 cm) |
| Machine Depth | 20 inches (50.8 cm) |
| Installation Time | 20–30 minutes typical |
| Compatibility | Dillon CP2000, RL1100, Super 1050 (press not included) |
Yes. The Mark 7 Autodrive is a plug-and-play system designed to mount on your unmodified CP2000, RL1100, or Super 1050 with no alterations to the press itself. Typical installation takes 20–30 minutes.
Absolutely. The Autodrive is fully compatible with Mr. Bulletfeeder and GSI bullet feeders, allowing you to automate both case feeding and bullet seating as part of your complete reloading workflow.
The Autodrive arrives pre-assembled and ready to install on its aluminum billet base plate. Included are the motor, gearbox, electronics, and the 10-inch digital control tablet with mounting bracket. Everything you need to begin automating is included; the Dillon press itself is sold separately.
Yes. The Autodrive supports both 110V and 220V operation at 50 Hz or 60 Hz with no variation in speed or performance. Select your voltage at checkout.
SKU: 167522659 • Width: 15.5in • Height: 10.75in • Depth: 20.5in • Weight: 55.8oz
Availability: In Stock
Current Stock: Out of stock
The Mark 7 Autodrive is a motorized automation system that transforms your Dillon progressive press into a high-speed production machine. If you're running a CP2000, RL1100, or Super 1050, this plug-and-play drive system handles the mechanical work—delivering consistent power at up to 3500 rounds per hour. The whole assembly mounts on a ½-inch aluminum billet base plate and arrives pre-assembled and ready to install, typically in 20–30 minutes, with no modifications to your existing press required.
What sets the Autodrive apart is its integrated control system: a 10-inch digital tablet (included) gives you real-time monitoring and on-the-fly adjustments—no separate control boxes cluttering your bench. The microprocessor-controlled setup handles digital clutch pressure, jog speed, dwell time, and emergency stop all from that single screen. You get a 1.5 HP high-torque motor paired with a CNC-grade planetary gearbox and maintenance-free timing belt drive, engineered to run smoothly at selectable speeds. The system is fully compatible with leading bullet feeders like Mr. Bulletfeeder and GSI, so you can automate your case feeding and bullet seating in one integrated workflow.
International reloaders will appreciate the dual-voltage design: run it at 110V or 220V, 50 Hz or 60 Hz, with no performance variation. The software is upgradeable for life, and the system's user-configurable settings let you dial in your process exactly. Whether you're a serious high-volume loader looking to streamline production or a competitive shooter who needs consistent output, the Autodrive transforms manual press operation into efficient automation.
| Motor | 1.5 HP high-torque |
| Gearbox | CNC-grade planetary |
| Maximum Speed | 3500 rounds per hour |
| Control System | 10-inch digital tablet (included) |
| Base Plate | ½-inch aluminum billet |
| Drive System | Maintenance-free timing belt |
| Voltage Options | 110V or 220V |
| Frequency | 50 Hz or 60 Hz |
| Machine Height | 41 inches (104 cm) |
| Machine Width | 16 inches (40.6 cm) |
| Machine Depth | 20 inches (50.8 cm) |
| Installation Time | 20–30 minutes typical |
| Compatibility | Dillon CP2000, RL1100, Super 1050 (press not included) |
Yes. The Mark 7 Autodrive is a plug-and-play system designed to mount on your unmodified CP2000, RL1100, or Super 1050 with no alterations to the press itself. Typical installation takes 20–30 minutes.
Absolutely. The Autodrive is fully compatible with Mr. Bulletfeeder and GSI bullet feeders, allowing you to automate both case feeding and bullet seating as part of your complete reloading workflow.
The Autodrive arrives pre-assembled and ready to install on its aluminum billet base plate. Included are the motor, gearbox, electronics, and the 10-inch digital control tablet with mounting bracket. Everything you need to begin automating is included; the Dillon press itself is sold separately.
Yes. The Autodrive supports both 110V and 220V operation at 50 Hz or 60 Hz with no variation in speed or performance. Select your voltage at checkout.
SKU: 167522659 • Width: 15.5in • Height: 10.75in • Depth: 20.5in • Weight: 55.8oz